1. RFID Group Progress Leader: Muhammad Salman Younas Team: Jawad Khalil Sheikh Saad Al-Shaalan Muhammad Al-Khamees

2. Identification technology that uses RF Tags come in all sizes and shapes Two main types of tags – Active: own power source(60-300 feet)($10-$80) – Passive: powered by reader(2inches-30feet)($0.20-$3) RFID tags are small radio transmitters and receivers Mainly three frequency types – LF: 125-134.2 kHz – HF: 13.56 MHz – UHF: 868-928 MHz What is RFID?

3. Low Frequency – good penetration of materials (including water) – less susceptible to effect of metal – longer read range than HF – maximum read range: 12 inches High Frequency – supports anti-collision read – tags lighter and cheaper than LF tags – more memory capacity than LF tags – maximum read range: 4 feet Ultra-High Frequency – behave more like light waves than radio waves – perform poorly with water and metal – read range: 10+ feet RFID Tag Frequencies

4. Read/Write range Materials present in surroundings Tag memory needed Cost Tag form (size, shape, etc..) Host application and Communication Protocol Power Consumption Antenna size Interference Factors Affecting Reader Choice

5. Skyetek M1 Reader (Storage Room) Intensecomp Reader(Products Gate) Readers Used

6. Achieved reader connectivity Performed Single Read Performed Anti-collision read Found maximum tag read ranges Testing in presence of water and metal Ran sample codes – Skyetek M1 reader: C, Java, C++, VB – Intensecomp reader: VB.NET, Java, VB, C Tasks Completed

7. Maximum tag ranges Skyetek M1 Reader Tag Ranges 4-5 cm5-7 cm10-12 cm

8. Larger the tag, greater the range – more signal reflection More the tags, less the range – less power supplied per tag Presence of water and metal – water and metals absorb HF waves – reduces range greatly Skyetek M1 Reader Tags

9. Hardware – Reader connectivity problem power supply was not connected properly – No tags read problem internal antenna was not connected – Read range problem built own antenna Software – Java programs not running had to add Java commAPI classes Skyetek M1 Reader Problems

10. Building the antenna Single Loop Antenna Copper Tape External Antenna Skyetek M1 Reader (Hardware)

11. Adjust C3 and C4 values to obtain maximum range Skyetek M1 Reader (Hardware)

12. Antenna built and test read was successful Skyetek M1 Reader (Hardware)

13. Reading range from antenna very poor – use copper tape for antenna material without antenna with antenna Skyetek M1 Reader (Hardware)

14. Java Application Skyetek M1 Reader (Software) SkyeTekCommSkyeTekMessagingSkyeTekListenerCRC16SkyeTekApplication SkyeTekCommImpl SkyeTekSerialComm SkyeTekReader SkyeTekTag Debug Format messagingreaderutilitydemo skyetek comm Numbers SkyeTekException

15. Java Application Skyetek M1 Reader (Software)

16. Java Application Skyetek M1 Reader (Software)

22. Detecting tags depends greatly on their position Skyetek M1 Reader (Software)

26. Antenna Multiplexer SkyePlus MXH Antenna Multiplexer Use multiple reader connections – a COM port needed for each M1 reader Skyetek M1 Multiple Readers