Presentation is loading. Please wait.

Presentation is loading. Please wait.

Research Co-ordination Meeting on Elements of Power Plant Design for Inertial Fusion Energy 4-7 November 2003 DESIGN CONCEPT OF FAST-IGNITION HEAVY ION.

Published by Modified over 9 years ago

Similar presentations

Presentation on theme: "Research Co-ordination Meeting on Elements of Power Plant Design for Inertial Fusion Energy 4-7 November 2003 DESIGN CONCEPT OF FAST-IGNITION HEAVY ION."— Presentation transcript:

1 Research Co-ordination Meeting on Elements of Power Plant Design for Inertial Fusion Energy 4-7 November 2003 DESIGN CONCEPT OF FAST-IGNITION HEAVY ION FUSION POWER PLANT Medin S.A. medin@ihed.ras.ru Institute for High Energy Densities, Moscow, Russia Basko M.M. basko@vitep1.itep.ru Churasov M.D. churazov@vitep5.itep.ru Koshkarev D.G. koshkarev@vitep5.itep.ru Sharkov B.Yu. Boris.Sharkov@itep.ru Institute for Theoretical and Experimental Physics, Moscow, Russia Orlov Yu.N. orlmath@keldysh.ru Suslin V.M. suslinvm@keldysh.ru Keldych Institute for Applied Mathematics, Moscow, Russia Slide № 1 Medin S.A. et al

2 Slide № 2 Medin S.A. et al FIHIF Driver Scheme

3 Slide № 3 Medin S.A. et al Beam parameters in HIF driver for fast ignition fusion Station nu mb er Ion ener gy (GeV ) RF freque ncy (MHz) Bunch current (A) Momentu m spread (x10 4 ) Emittanc e (  m) β=v/c 110 -4 0.04±3000.30.001 210 -3 6.250.16±1800.90.003 310 -2 12.50.4±360.90.010 40.1501±370.90.033 50.22004±750.950.047 61001000230±210.745 7100 Single bunch 20000±3010.745 8100 Single bunch 1600±2010.745

4 Slide № 4 Medin S.A. et al HIGH POWER HEAVY ION DRIVER Ions Ion energy (GeV) 100 Hollow Compression beam Energy (MJ) 7.1 (profiled) Duration (ns) 75 Rotation frequency (GHz) 1 Ignition beam Energy (MJ) 0.4 Duration (ns) 0.2 Main linac length (km) 11 Transmission line length (km) 5 Driver efficiency 0.25

5 Cylindrical FIHIF Target Slide № 5 Medin S.A. et al

6 Slide № 6 Medin S.A. et al Cylindrical FIHIF Target

7 Slide № 7 Medin S.A. et al CYLINDRICAL TARGET DT fuel mass (g)0.006 Total mass (g)3.696 Length (mm)7.1 ρR parameter (g/cm 2 )0.5 Burn fraction0.35 Gain100 Fusion energy (MJ)750 Energy partition X-ray (MJ)17 Ion debris (MJ)187 Neutrons (MJ)546

8 Density distribution in compressed cylindrical target for FIHIF (t=30ns) Slide № 8 Medin S.A. et al

9 REACTOR CHAMBER FOR FIHIF POWER PLANT Slide № 9 Medin S.A. et al

10 REACTOR CHAMBER CHARACTERISTICS Fusion energy per shot (MJ)750 Repetition rate (Hz)2 Li/Pb atom density (cm -3 )10 12 Coolant temperature ( o C)550 Explosion cavity diameter (m)8 Number of beam penetrations2 First wall materialSiC Coolant tubes materialV-4Cr-4Ti Energy multiplication1.096 Slide № 10 Medin S.A. et al

11 S.J. Zinkle 11 th APEX Meeting Argonne National Laboratory, May 10-12, 2000

12

13

14 Slide № 14 Medin S.A. et al

15 Evaporation-condensation dynamics Slide № 15 Medin S.A. et al

16 Slide № 16 Medin S.A. et al

17 Slide № 17 Medin S.A. et al Material of blanket zones R, cm  R, cm , g/cm 3 M, 10 3 kg Q/V, MJ/m 3 Q, MJ 1. PbLi 2. PbLi 3. SiC/ PbLi 4. PbLi 5. V/10Cr/5Ti 6. PbLi 7. V/10Cr/5Ti 8. PbLi 9. V/10Cr/5Ti 10. PbLi 11. V/10Cr/5Ti 12. PbLi 13. V/10Cr/5Ti 14. PbLi 15. V/10Cr/5Ti 16. HT-9 400,0 400,1 401,1 411,1 411,6 417,6 417,9 423,9 424,2 430,2 430,5 436,5 436,8 443,0 444,0 450,0 400 0,1 1 10 0,5 6 0.3 6 0,3 6 0,3 6 0,3 6,2 1 6 10 -9 9,3 5,7 9,3 5,96 9,3 5,96 9,3 5,96 9,3 5,96 9,3 5,96 9,3 5,96 7,9 3  10 -6 1,86 11,51 192,69 6,31 120,62 3,87 124,24 4,05 127,96 4,17 131,78 4,29 140,15 14,72 119,05 Total: 1000 5  10 -9 17,92 13,68 12,79 3,89 9,85 1,96 5,17 1,03 3,29 0,56 1,95 0,48 0,85 0,17 0,08 1,6  10 -6 3,58 27,65 276,26 4,13 127,84 1,27 69,24 0,71 45,46 0,40 27,98 0,34 13,33 0,44 1,32 Total: 600 FIHIF Blanket Structure and Neutron Energy Deposition

18 Slide № 18 Medin S.A. et al ENERGY DEPOSITION IN BLANKET MATERIALS

19 Slide № 19 Medin S.A. et al

20 Slide № 20 Medin S.A. et al ENERGY CONVERSION SYSTEM Primary coolant loop Li 17 Pb 83 Max./min. temperature ( o C)550/350 Mass flow rate (ton/s)13.1 Pump power (MW)11.5 Intermediate coolant loop Na Max./min. temperature ( o C)500/300 Mass flow rate (ton/s)6.40 Pump power (MW)3.77 Steam cycle Steam parameters (MPa/ o C/ o C)18/470/470 Net efficiency0.417 Power plant parameters Net power (per 1 chamber) (MW)670 Net efficiency0.373

21 Slide № 21 Medin S.A. et al CONCLUSIONS The concept of power plant for fast ignition HIF involves a number of new components and devices. High power heavy ion driver and cylindrical target look to have clear basic design. The massive target causes some redistribution of energy fluxes resulting from microexplosion. Altogether the long driver train and target positioning in flight are problems of concern. The reactor chamber with wetted first wall has a minimum number of ports for beam injection. The composition of the reactor chamber of two sections makes easier the condensation problem and partly lessens pressure loading. The problems of coolant droplets and thermal stresses in blanket materials are of major concern in the reactor chamber. The energy conversion system consisting of three loops is a convenient object for the plant efficiency optimization and thermal equipment development.

Download ppt "Research Co-ordination Meeting on Elements of Power Plant Design for Inertial Fusion Energy 4-7 November 2003 DESIGN CONCEPT OF FAST-IGNITION HEAVY ION."

Similar presentations

Sandia National Laboratories is a multi-program laboratory managed and operated by Sandia Corporation, a wholly owned subsidiary of Lockheed Martin Corporation,

Sandia National Laboratories is a multi-program laboratory managed and operated by Sandia Corporation, a wholly owned subsidiary of Lockheed Martin Corporation,
Areal RF Station A. Vardanyan22.06.2012. RF System The AREAL RF system will consist of 3 RF stations: Each RF station has a 1 klystron, and HV modulator,

Areal RF Station A. Vardanyan RF System The AREAL RF system will consist of 3 RF stations: Each RF station has a 1 klystron, and HV modulator,
Physics of Fusion Lecture 15: Inertial Confinement Fusion Lecturer: Dirk O. Gericke.

Physics of Fusion Lecture 15: Inertial Confinement Fusion Lecturer: Dirk O. Gericke.
March 21-22, 2006 HAPL meeting, ORNL 1 Status of Chamber and Blanket Effort A. René Raffray UCSD With contributions from: M. Sawan B. Robson G. Sviatoslavsky.

March 21-22, 2006 HAPL meeting, ORNL 1 Status of Chamber and Blanket Effort A. René Raffray UCSD With contributions from: M. Sawan B. Robson G. Sviatoslavsky.
SYSTEMS AND ENGINEERING TECHNOLOGY INVESTIGATION OF AN INERTIAL CONFINEMENT FUSION-FISSION HYBRID REACTOR Kiranjit Mejer PTNR Research Project 2009 Frazer-Nash.

SYSTEMS AND ENGINEERING TECHNOLOGY INVESTIGATION OF AN INERTIAL CONFINEMENT FUSION-FISSION HYBRID REACTOR Kiranjit Mejer PTNR Research Project 2009 Frazer-Nash.
Systems Analysis for Modular versus Multi-beam HIF Drivers * Wayne Meier – LLNL Grant Logan – LBNL 15th International Symposium on Heavy Ion Inertial Fusion.

Systems Analysis for Modular versus Multi-beam HIF Drivers * Wayne Meier – LLNL Grant Logan – LBNL 15th International Symposium on Heavy Ion Inertial Fusion.
Japan-US Workshop held at San Diego on April 6-7, 2002 How can we keep structural integrity of the first wall having micro cracks? R. Kurihara JAERI-Naka.

Japan-US Workshop held at San Diego on April 6-7, 2002 How can we keep structural integrity of the first wall having micro cracks? R. Kurihara JAERI-Naka.
Assessment of Chamber Concepts for IFE Power Plants: The ARIES-IFE study Farrokh Najmabadi for the ARIES Team IFSA2001 September 9-14, 2001 Kyoto, Japan.

Assessment of Chamber Concepts for IFE Power Plants: The ARIES-IFE study Farrokh Najmabadi for the ARIES Team IFSA2001 September 9-14, 2001 Kyoto, Japan.
First Wall Thermal Hydraulics Analysis El-Sayed Mogahed Fusion Technology Institute The University of Wisconsin With input from S. Malang, M. Sawan, I.

First Wall Thermal Hydraulics Analysis El-Sayed Mogahed Fusion Technology Institute The University of Wisconsin With input from S. Malang, M. Sawan, I.
Wayne R. Meier Lawrence Livermore National Lab Heavy Ion Fusion Modeling Update* ARIES e-Meeting October 17, 2001 * This work was performed under the auspices.

Wayne R. Meier Lawrence Livermore National Lab Heavy Ion Fusion Modeling Update* ARIES e-Meeting October 17, 2001 * This work was performed under the auspices.
Design Considerations for Beam Port Insulator Rings

Design Considerations for Beam Port Insulator Rings
June 14-15, 2007/ARR 1 Trade-Off Studies and Engineering Input to System Code Presented by A. René Raffray University of California, San Diego With contribution.

June 14-15, 2007/ARR 1 Trade-Off Studies and Engineering Input to System Code Presented by A. René Raffray University of California, San Diego With contribution.
The Heavy Ion Fusion Virtual National Laboratory UC Berkeley Christophe S. Debonnel 1,2 (1) Thermal Hydraulics Laboratory Department of Nuclear Engineering.

The Heavy Ion Fusion Virtual National Laboratory UC Berkeley Christophe S. Debonnel 1,2 (1) Thermal Hydraulics Laboratory Department of Nuclear Engineering.
The Heavy Ion Fusion Virtual National Laboratory UC Berkeley C.S. Debonnel 1,2, S.S. Yu 2, P.F. Peterson 1 (1) Thermal Hydraulics Laboratory Department.

The Heavy Ion Fusion Virtual National Laboratory UC Berkeley C.S. Debonnel 1,2, S.S. Yu 2, P.F. Peterson 1 (1) Thermal Hydraulics Laboratory Department.
Impact of Liquid Wall on Fusion Systems Farrokh Najmabadi University of California, San Diego NRC Fusion Science Assessment Committee November 17, 1999.

Impact of Liquid Wall on Fusion Systems Farrokh Najmabadi University of California, San Diego NRC Fusion Science Assessment Committee November 17, 1999.
Findings and Recommendations from Wetted-Wall IFE Designs Jeff Latkowski Lawrence Livermore National Laboratory March 9, 2001 Work performed under the.

Findings and Recommendations from Wetted-Wall IFE Designs Jeff Latkowski Lawrence Livermore National Laboratory March 9, 2001 Work performed under the.
October 24, 2001 1 1. Remaining Action Items on Dry Chamber Wall 2. “Overlap” Design Regions 3. Scoping Analysis of Sacrificial Wall A. R. Raffray, J.

October 24, Remaining Action Items on Dry Chamber Wall 2. “Overlap” Design Regions 3. Scoping Analysis of Sacrificial Wall A. R. Raffray, J.
ARIES-IFE Assessment of Operational Windows for IFE Power Plants Farrokh Najmabadi and the ARIES Team UC San Diego 16 th ANS Topical Meeting on the Technology.

ARIES-IFE Assessment of Operational Windows for IFE Power Plants Farrokh Najmabadi and the ARIES Team UC San Diego 16 th ANS Topical Meeting on the Technology.
Progress Report on Chamber Dynamics and Clearing Farrokh Najmabadi, Rene Raffray, Mark S. Tillack, John Pulsifer, Zoran Dragovlovic (UCSD) Ahmed Hassanein.

Progress Report on Chamber Dynamics and Clearing Farrokh Najmabadi, Rene Raffray, Mark S. Tillack, John Pulsifer, Zoran Dragovlovic (UCSD) Ahmed Hassanein.
Laser IFE Program Workshop –5/31/01 1 Output Spectra from Direct Drive ICF Targets Laser IFE Workshop May 31-June 1, 2001 Naval Research Laboratory Robert.

Laser IFE Program Workshop –5/31/01 1 Output Spectra from Direct Drive ICF Targets Laser IFE Workshop May 31-June 1, 2001 Naval Research Laboratory Robert.

Similar presentations

Ads by Google