1. Instructions: Your team should use the following slides for your camera point. You need to make 3 different sets of slides – one for each of your three photo points (A, B and C). Since they will be the same for all the photos, you just need to make one set of the last two slides which describe and map the camera point. (Orange text should be removed and/or replaced when you add your images.)

2. Insert Photo Here And mark any obvious features in the photo that are discussed in the camera point description

3. Location West Tributary Kelsey Creek Photo Point Insert full # of photo (e.g. 4A, 4B, 4C, etc.) Camera Point Insert # of camera point (e.g. 1,2,3,4,5, or 6) Bearing Insert bearing of photo here Goal Monitor stream restoration project Duration 10 years Regime 1 time each year Date Insert date photo was taken Time Insert time photo was taken Notes: Insert description of any landmarks in the photo that helps the photographer take the right photo.

4. Directions to Camera Point: Describe directions here… North

5. Photo of Camera PointPhoto Point Map 1A Key Starting Point Photo Point Camera Point 1 Insert map with camera point Use accurate bearings Label bearing and distances Show approximate river position Same image for all photo points at your camera point Insert photo of camera point Label any features that help locate the camera point *Map shows 2nd green manhole cover as starting point North

6. Photo of Camera PointPhoto Point Map 1A Key Starting Point* Photo Point Camera Point 1 2 2A 2C 2B *Map shows 2nd green manhole cover as starting point Example 35°;125 ft 96°;22 ft 30° 115° 184° West Trib Kelsey Creek North