1. ConneXium Network Manager
A Network Management Software Solution that is optimized for Industrial Networks

2. ConneXium Network Manager
What is it?
A Network Management Software Solution that is optimized for Industrial Networks
Who is it designed for?
Automation and Controls personnel who are familiar with Industrial Ethernet, PLC’s, HMI and SCADA equipment and concepts
How to use it?
To configure infrastructure devices such as managed switches
To monitor network performance
To alert personnel of real or possible problems
To baseline and document network performance

3. ConneXium Network Manager
Problem
Potential Problem
Past Problem

4. ConneXium Network Manager
Why do I need it?
For the same reason you need SCADA or HMI – to provide a window into Ethernet network operation and improve plant productivity.
Devices are displayed with port connections or names
Devices are portrayed with appropriate icons if available
Inactive portion of rings are shown as dashed
Display can be customized, background diagram can be added to correspond to physical location

5. Device Support Wireless devices Unmanaged devices Third party
Shows link status
Logs changes in access point location for roaming
Unmanaged devices
Using Ping, finds devices within configured scan range.
Third party
Supports third party devices via Ping and SNMP
Both infrastructure and end devices supported
Any SNMP enabled device can be configured and managed using CNM

6. Let’s Play
Start the ConneXium Network Manager software

7. Set Scan Range
Create a New Project
Set the scan range

8. Active Scan Ranges Multiple ranges can be set
The Active , the software will scan the devices in the active range

9. Device Discovery Displays devices found on the network SNMP PING
Identity Object
ConneXium Network Manager matches the devices to existing profile

10. Auto Topology
Once all devices have been identified next step would be to see the logical layout of the network.

11. Auto Topology Options

12. Auto Topology Layout

13. Network Layout Core Network Control Cabinet Control Room Conveyor 65
Core
Network
Control Room
Control Cabinet

14. Folder Options

15. Network Disruptions

16. Link Down

17. Link Down Information

18. Link Recovery
Status Update

19. Redundancy at Work

20. Redundancy link down
Alternate link
Broken link

21. Network Recovered Status notification
color will remain green till event has been acknowledged

22. CNM OPC Tags
OPC tags allow you to see that same information on SCADA page!

23. ConneXConfig
Make configuration of multiple switches a breeze!

24. Changing Parameters

25. Saving Multiple Configurations

26. Seeing the Results

27. Customize Display - Icons
Changing icons and background to customize the display

28. Customize Display - Background
Changing background image with your logo or building blueprint

29. Play
Now you do it!