1. IBL and SLHC activities at LPNHE Paris 2011 - 2012 – 2013 Réunion Atlas France - 10 octobre 2012

2. IBL activities D. Laporte (IE) 90% P. Ghislain (AI) 10% B. Grosjean (student) 2 months

3. IBL parts End ring (x5), Al Central ring (x3), Al and PEEK X0 optimization

4. IBL Mockup Dummy staves (x14) Titanium screws Peek sliding parts Carbon fiber tube

5. Fitting at PP1 with LAPP

6. Fitting tools

7. SLHC activities D. Laporte (IE) 90% F. De Matos (IR) 50% P. Ghislain (AI) 10% Y. Orain (AI) 50 % B. Grosjean (student) 2 months S. Bouaziz (student) 6 months

8. Activities Cartigny design with CPPM Xo evaluation for differents group – UNIGENE : super modules – LBNL : Ibeam solution – Cartigny – Alpine stave – Barrel & Endcap calorimeter (response) FEA simulations – Cartigny Mechanical support for silicium R&D.

9. Cartigny design with CPPM

10. Thermal simulations

11. Thermomecanics FEA

12. X0 development Mode batch Fichier Paramètres Contrôle répertoire Message fin Non Oui Test mémoir e Macro catia Non Oui Catia Ecriture données Angle + pas Limite angle Non Oui Non Oui Macro IBM Developments by LPNHE Team, and IAO team (CCIN2P3) Additional layers have been developed, to cope with : CATIA memory management limitations Traceability of design analyses Huge output : scan on 0.1 by 0.1 grid  1.5 Gb file

13. X0 examples : Ibeam DistanceXo En bleu clair, mousse (X0=2130 mm) En cyan, structural beam en forme de I (X0=224 mm) En vert, Face sheet (X0=224 mm) En rouge, cooling pipe (Alu, X0=88.97 mm) En noir, cooling fluid (C3F8, X0=215.25 mm)

14. X0 examples : Alpine layer 3 Endblock Sensors Foam Face plate Omega tube X0 eta Epaisseur (mm)

15. Total cost : IBL Parts – Ti screws2,2K€ IBL mockup – Composite tube 1 K€ – Dummy pipe (steel)0,2 K€ – Sliding parts (PEEK)0,5 K€ – Dummy staves0,5 K€ IBL fitting – Tools0,2 K€ Total ---------- 4,6 k€ SLHC (prevision for 2013) – X0 software adaptation2 K€ – Purchase of materials for prototyping/testing2 K€

16. Perspectives IBL – LPNHE commitments delivered – Participation to installation  4 k€ travels in 2013 SLHC – X0 software adaptation2 K€ – Purchase of materials for prototyping/testing2 K€