1. Trusted and preferred by professionals since 1946 we are known for our commitment to quality, performance and consistency.
Industries Served
Manufacturing / Fabrication
Hospitals & Health Care Facilities
Fireproofing Residential/Commercial
Retail / Commercial Facilities
Food & Beverage Processing
Maintenance Oil & Gas
Water & Wastewater Facilities
Services Offered
Project Inspection
Coating Recommendation
Failure Analysis
Free Technical Service
Job Site Training
Specification Writing
Danny Janulek – Idaho, Nevada & Northern California (650)
Steve Sexton – Northern & Central California (925)
Greg Sutton – Texas, Oklahoma & Arkansas (918)

2. Contego Passive Fire Barrier (PFB)

3. Types of Fire Barriers
1. (SFRM) Spray Applied Fire Resistive Material 2. (PFB) Passive Fire Barriers 3. (PFP) Passive Fire Protection (UL1709)

4. Spray Applied Fire Resistive Material (SFRM)
Monokote® is a gypsum based cementitious spray-applied fire resistive material for structural steel framed buildings
The term cementitious as defined by ASTM or Underwriters Laboratories Inc. applies to all fireproofing that is wet mixed and then pumped as a slurry. Cementitious does not refer to portland cement content.

5. (PFB) Passive Fire Barriers Intumescent – Thin Film
There are two basic categories of Architectural Fireproofing, Residential and Commercial applications. These products usually consist of a thin-film latex or solvent based material.

6. (PFP) Passive Fire Protection Industrial Applications
There are two basic types of industrial fireproofing—cementitious and epoxy intumescent. These products are usually designed to meet UL1709
Cementitious fireproofing is a cement-based material that provides fire protection through its inherent insulative properties.
Epoxy intumescent fireproofing has the appearance and application characteristics of a protective coating.

7. Contego is designed to protect a wide range of building:
Materials including structural steel, aluminum, dimensional lumber, manufactured wood products, trusses, drywall, spray polyurethane foam insulation, HDPE wall panels, concrete, plaster, solid core doors and more. The product may also be used for conduit, decking and cladding.

8. Why use Contego
Intumescent Fireproofing Systems allow designers to express the steel structure as an art form in buildings where fire resistance ratings are required.
Project planners now have flexibility to create unique exposed steel designs where fire resistance ratings are required, with aesthetically pleasing, durable and cost effective alternatives.

9. Features and Benefits Decorative Thin Film Coating
1, 2 and 3 Hour Fire Ratings
0 V.O.C. /Non-Toxic
Excellent Durability
High Impact Strength
Provides A Clean Dust Free Environment
Easy Paint-Like Application
Suitable For Top coating with any KM Paint
Marketable to our Painting Contractors
Direct Manufacturer Support

10. Tested to 9 Standards Tested to 9 ASTM International Standards:
ASTM D Standard Test Method For Density of Paint, Varnish, Lacquer, and Related Products.
ASTM D Standard Test Method For Volatile Content of Coatings.
ASTM D Standard Methods for Measuring Adhesion by Tape Test (Methods A and B)
ASTM D Standard Practice for Determining Volatile Organic Compound (VOC) Content of Paints and Related Coatings.
ASTM D "Standard Test Method for Water in Paints and Paint Materials by Karl Fischer Method.
ASTM E 84 - Standard Test Method for Surface Burning Characteristics of Building Materials.
ASTM E Standard Test Methods for Fire Tests of Building Construction and Materials.
ASTM E Standard Test Method for Determining Rate of Air Leakage Through Exterior Windows, Curtain Walls, and Doors Under Specified Pressure Differences Across the Specimen.
ASTM E Standard Guide for Measurement of Gases Present or Generated During Fires.

11. FIREFILM III VS CONTEGO
TOTAL Firefilm 722 gallons
ONE HOUR PROTECTION
1 HOUR RATINGS
W Shapes - Wide Flange Beams and Columns
Total
DFT
Coverage
Required
Minimum
Linear Ft.
Square Ft.
Mils
(Sq. Ft./Gal.)
Gallons
Coats
Section*
W/D**
ft.2/ft
W12x22
0.560
3.28
384.00 64
15.00
83.97 3
W12x16
0.410
3.25 88
10.91
350.95 4
Sub Tot
434.91
L Shapes - Angles
L6x6x1/2
0.824
1.98
510.00 22
43.64
23.14 1
L5x3x1/4
0.418
1.32
92.00
121.44 43
22.33
5.44 2
L4x4x3/8
0.615
61.00
80.52 29
33.10
2.43
L4x4x1/4
0.416
66.00
87.12
3.90
L3x3x3/8
0.608
0.98
142.00
139.59 30
32.00
4.36
L3x3x1/4
0.414
526.00
517.06 44
21.82
23.70
497.89

12. Albi-Clad TF VS. CONTEGO
Sample thickness required for 2 Hour application.
Beam Type Albi-Clad Contego
W10x mils 77 mils
HSS 8x8x mils 42 mils
Winner!!

13. AD Firefilm III VS. CONTEGO
Sample thickness required for 2 Hour application:
Beam Type FIREFILM CONTEGO
W10x49
Not possible (Design X641) 77 mils
HSS 8x8x.500
186 mils (Design X642) 42 mils
Winner!
A/D Firefilm® III

14. GreatWesternPainting.com Call Robert 208-371-7757
Great Western Painting Commercial & Industrial Painting. Serving the U. S. A. Water Towers -Tanks - Hotels Chemical plants - High Rises - Structural Steel Thank You