3. OneTwoThree FourFiveSix SevenEightNine End

4. Click on the arrow below to continue.

5. Click on the arrow below and try again

6. Click on the arrow below and try again

7. Click on the arrow below and try again

8. Click on the arrow below and try again

9. Click on the arrow below and try again

10. Click on the arrow below and try again

11. Click on the arrow below and try again

12. Click on the arrow below and try again

13. Click on the arrow below and try again

14. Which alignment angle is NOT adjustable? 1. Camber Camber 2. Caster Caster 3. Steering Axis Inclination Steering Axis Inclination

15. Front wheel toe is adjusted by using…. 1. Shims Shims 2. Tie rod sleeves Tie rod sleeves 3. Adjustment cams Adjustment cams

16. The three major components of the steering system are: Steering column, steering gear and… 1. Steering hanger beamSteering hanger beam 2. Steering linkageSteering linkage 3. Steering toeSteering toe

17. An adjusting sleeve is attached to the…. 1. Tie rod Tie rod 2. Idler arm Idler arm 3. Pitman arm Pitman arm

18. When the rear of the front tires are closer together than the front, the steering has…. 1. Bent parts Bent parts 2. Positive scrub radius Positive scrub radius 3. Toe out Toe out

19. Unsprung weight is the weight of the…. 1. Wheels, tires and moving parts of the suspension. Wheels, tires and moving parts of the suspension. 2. Vehicle, minus the wheels, tires and moving parts of the suspension. Vehicle, minus the wheels, tires and moving parts of the suspension. 3. Vehicle, without any load/passengers. Vehicle, without any load/passengers.

20. McPherson strut suspensions use what type of springs? 1. Leaf Leaf 2. Torsion bar Torsion bar 3. Coil Coil

21. Backward and forward tilt of the spindle support is referred to as? 1. Camber Camber 2. Steering axis inclination Steering axis inclination 3. Caster Caster

22. Inward or outward tilt of the front wheels is referred to as? 1. Camber Camber 2. Steering axis inclination Steering axis inclination 3. Caster Caster

23. You are ready for the test!