1. 2. Run. Hours button 1. Run. Hours screen Running hours

2. Last time running hours are entered Last number of running hours Actual number of running hours (calculated!!!) MARAD asks WEEKLY for the actual number of running hours RED = overdue YELLOW = you just changed but did not save yet GREEN= OK RED = overdue YELLOW = you just changed but did not save yet GREEN= OK

3. Add a device 1. Press “Add”

4. Add a device 1. Press “Add” 2. Type text

5. Add a device 1. Press “Add” 2. Type text 3. Press (a pop-up appears)

6. Add a device 1. Press “Add” 2. Type text 3. Press (a pop-up appears) 4. Press or click “OK”

7. Add a device 1. Press “Add” 2. Type text 3. Press (a pop-up appears) 4. Press or click “OK” 5. Type actual running hours and press

8. Add a device 1. Press “Add” 2. Type text 3. Press (a pop-up appears) 4. Press or click “OK” 5. Type actual running hours and press 6. A check pop-up appears. If correct, press or click “YES”

9. Add a device 1. Press “Add” 2. Type text 3. Press (a pop-up appears) 4. Press or click “OK” 5. Type actual running hours and press 6. A check pop-up appears. If correct, press or click “YES” 7. Device successfully added

10. Add a device When an device is added in the hour screen it can be used in the maintenance module. Maintenance points can now run on running hours. When ‘’running hours’’ is selected the right device can be attached on the maintenance point. See chapter ‘Maintenance’ When an device is added in the hour screen it can be used in the maintenance module. Maintenance points can now run on running hours. When ‘’running hours’’ is selected the right device can be attached on the maintenance point. See chapter ‘Maintenance’

11. Change the name of a device 1. Left- or Right-click at the device

12. Change name of a device 1. Left- or Right-click at the device 2. Change name

13. Change name of a device 1. Left- or Right-click at the device 2. Change name 3. Press

14. Delete a device 1. Be sure the device is not used anymore and not linked to any maintenance point. 2. Left- or Right-click at the device

15. Delete a device 1. Be sure the device is not used anymore and not linked to any maintenance point. 2. Left- or Right-click at the device 3. Click at the red cross

16. Delete a device 1. Be sure the device is not used anymore and not linked to any maintenance point. 2. Left- or Right-click at the device 3. Click at the red cross 4. If you are sure, press or click “Yes”