1. Gigaset Communications is a trademark licensee of Siemens AG. © Gigaset Communications Stephan Kremer CC Frontline 03/08/2015 1 Data Connection / Talk & Surf 6.0.30 Stephan Kremer, 27.01.2009

2. Gigaset Communications is a trademark licensee of Siemens AG. © Gigaset Communications Stephan Kremer CC Frontline 03/08/2015 2 Agenda Main Features Requirements General Installation Sample Installation with a Gigaset SX353 Sample Installation with a Gigaset SX100 FAQ`s

3. Gigaset Communications is a trademark licensee of Siemens AG. © Gigaset Communications Stephan Kremer CC Frontline 03/08/2015 3 Internet connection using the Gigaset M34 USB, Gigaset Dect USB Adapter/ Gigaset M101/M105 with CX100isdn/ CX150isdn SX100isdn/ SX150isdn CX 203isdn and CX 253isdn Internet connection and the features of the Talk & Surf application with 3070isdn / 3075isdn 4170isdn / 4175isdn SX205isdn / SX255isdn SX303isdn / SX353isdn (with using USB direct connecting or wireless via Gigaset M34 USB, Gigaset Dect USB Adapter/Gigaset M105/M101) Main Features

4. Gigaset Communications is a trademark licensee of Siemens AG. © Gigaset Communications Stephan Kremer CC Frontline 03/08/2015 4 Sytem requirements IBM compatibel Pentium II @ 200 Mhz 64MB RAM 95 MB free on harddisk. 1 free USB connection for using the USB Direct connection or wireless via Gigaset M34 USB, Gigaset USB Adapter Dect / M105. 1 CD-ROM or DVD-player. Requirements operating system Windows 98SE, Windows ME, Windows 2000 (Servicepack 3), Windows XP and Windows Vista (32bit) Fax functionality for PC and CAPI are NOT compatible with WindowsVista!!! Requirements

5. Gigaset Communications is a trademark licensee of Siemens AG. © Gigaset Communications Stephan Kremer CC Frontline 03/08/2015 5 Start of the Installation Wizard When using the CD, the software starts automatically. Supported languages: German English French Italian Spanish Portuguese Dutch Polish Installation

6. Gigaset Communications is a trademark licensee of Siemens AG. © Gigaset Communications Stephan Kremer CC Frontline 03/08/2015 6 Installation To install the Talk & Surf 6.0 choose : „Further models(only ISDN)“

7. Gigaset Communications is a trademark licensee of Siemens AG. © Gigaset Communications Stephan Kremer CC Frontline 03/08/2015 7 Install Software: Choice of used device and installation of the software components. Readme files: Important information, not available in the manual. Service & Support: Opens an Internetconnection. (old Link) Installation

8. Gigaset Communications is a trademark licensee of Siemens AG. © Gigaset Communications Stephan Kremer CC Frontline 03/08/2015 8 The installation starts. The version of MS Installer is being checked. Possibly the pc must be restartet. If components (T&S 5 or 6) were already installed, then they will be removed / updated. Installation

9. Gigaset Communications is a trademark licensee of Siemens AG. © Gigaset Communications Stephan Kremer CC Frontline 03/08/2015 9 The used basestation must be selected. The first three options will only install the configuration software for the Gigaset M34 USB / Gigaset USB Adapter / M105 / M101 and ISDN-WAN driver or the so called Unimodem driver for the internet access. The options 4-6 will install USB-WAN drivers, software for the Gigaset M34 USB / Gigaset USB Adapter / M105 / M101, CAPI drivers, Fax drivers and the Talk & Surf application (Depending on the Installation) Installation

10. Gigaset Communications is a trademark licensee of Siemens AG. © Gigaset Communications Stephan Kremer CC Frontline 03/08/2015 10 Example: Installation of a Gigaset SX353.

11. Gigaset Communications is a trademark licensee of Siemens AG. © Gigaset Communications Stephan Kremer CC Frontline 03/08/2015 11 Optionally the firmware can be updated. If a wireless adapter is to be used, the connection type can be chosen here. Example: Installation of a Gigaset SX353.

12. Gigaset Communications is a trademark licensee of Siemens AG. © Gigaset Communications Stephan Kremer CC Frontline 03/08/2015 12 The desired components can be chosen. Optional the installation path can be altered Example: Installation of a Gigaset SX353.

13. Gigaset Communications is a trademark licensee of Siemens AG. © Gigaset Communications Stephan Kremer CC Frontline 03/08/2015 13 An overview of the components to be installed is given. The software and drivers are not digitally signed. A message pops up to point on this missing signature which can be ignored during installation. Example: Installation of a Gigaset SX353.

14. Gigaset Communications is a trademark licensee of Siemens AG. © Gigaset Communications Stephan Kremer CC Frontline 03/08/2015 14 The missing signature can be ignored and installation continued. Now the device can be connected. As the drivers are copied to the harddisk, the installation is largely automated. Example: Installation of a Gigaset SX353.

15. Gigaset Communications is a trademark licensee of Siemens AG. © Gigaset Communications Stephan Kremer CC Frontline 03/08/2015 15 The installation has completed and the installed components are ready to be used after a restart. Example: Installation of a Gigaset SX353.

16. Gigaset Communications is a trademark licensee of Siemens AG. © Gigaset Communications Stephan Kremer CC Frontline 03/08/2015 16 After the installation several new symbols appear in the Taskbar. (Depending on the Installation) Wireless connection active USB connection active No connection available

17. Gigaset Communications is a trademark licensee of Siemens AG. © Gigaset Communications Stephan Kremer CC Frontline 03/08/2015 17 In the device manager the following new entries can be found after installation (Depending on the Installation) Installation with data boxUSB direct connection

18. Gigaset Communications is a trademark licensee of Siemens AG. © Gigaset Communications Stephan Kremer CC Frontline 03/08/2015 18 Talk & Surf application

19. Gigaset Communications is a trademark licensee of Siemens AG. © Gigaset Communications Stephan Kremer CC Frontline 03/08/2015 19 Example: Installation of a Gigaset SX100isdn Part 3

20. Gigaset Communications is a trademark licensee of Siemens AG. © Gigaset Communications Stephan Kremer CC Frontline 03/08/2015 20 After choosing the basstation, the connection type can be chosen. When using CX/SX100, CX/SX150, CX203/253 either Gigaset M34 USB, Gigaset USB Adapter, Gigaset M105 or M101 can be used for the connection. Optionally the installation path can be altered. Example: Installation of a Gigaset SX100isdn

21. Gigaset Communications is a trademark licensee of Siemens AG. © Gigaset Communications Stephan Kremer CC Frontline 03/08/2015 21 An overview of the components to be installed is given. After Installation of the Gigaset M34USB, Gigaset USB Adapter/M105 drivers (for M101 no drivers are installed) and the configuration software, the installation can be finished Example: Installation of a Gigaset SX100isdn

22. Gigaset Communications is a trademark licensee of Siemens AG. © Gigaset Communications Stephan Kremer CC Frontline 03/08/2015 22 After the installation an restart the following components should have been added to the device manager. (Depending on the installation). The Unimodem driver uses a (virtual) COM-Port for communication. Example: Installation of a Gigaset SX100isdn Installation with USB Adapter/M105Installation with M34 USB

23. Gigaset Communications is a trademark licensee of Siemens AG. © Gigaset Communications Stephan Kremer CC Frontline 03/08/2015 23 After uninstalling of older Talk & Surf versions I have problems to reinstalling it. It can happen that during deinstallation not all components are uninstalled 100% automatically. This happens with Talk 6 Surf 6.0.15. To remove everything the T&S uninstall tools can be used. These tools can be found on the CD in the folder \tools\uninst_t&s-5-x_drv and \tools\uninst_t&s-5-x_xp What type of application can be used with the installed driver? When using the Gigaset CX/SX100, CX/SX150, CX203/253 a Unimodem-driver/ISDN-WAN- driver is installled for the internet access. No T&S application, Capi or Fax drivers can be installed. The Unimodem-driver/ISDN-WAN- driver can be used only for an internet connection. Can I use the Unimodem drivers with the other base stations (like e.g. SX3x3/SX2x5) instead of installing the complete Talk & Surf? The Unimodem drivers can be used via a wireless adapter. The driver can be installed manually and should be given the correct (virtual) COM-Port. As a USB direct connection does not provide a virtual COM-port, it cannot be used with the Unimodem driver. FAQ`s

24. Gigaset Communications is a trademark licensee of Siemens AG. © Gigaset Communications Stephan Kremer CC Frontline 03/08/2015 24 Is it possible to increase the range with the Gigaset Repeater? No, the Repeater is just for telephony mode. It is not possible to set up a data connection with the Repeater. Is it possible to use both ISDN channels (Channel bundling) for a data connection at the same time? Yes, a channel bundling via the USB interface is possible. You can only use one ISDN channel if you want to make a DECT (wireless) data connection. Does a data adapter block register capacity of the base station? Yes, every registered data adapter uses one internal number and it reduces the space for the handsets. Is it possible to use more than one adapter at one base station? Yes, you can register as much data adapters as handsets. Please note, that every registered data adapter reduces the space for the handsets. FAQ`s

25. Gigaset Communications is a trademark licensee of Siemens AG. © Gigaset Communications Stephan Kremer CC Frontline 03/08/2015 25 How can I make an internet connection with the device? If there is a cable USB connection between the base station and the computer, an online connection is only possible with an installed ISDN WAN driver. If there is a wireless connection between the base station and the Gigaset M34 USB, USB adapter DECT, Gigaset M101 or Gigaset M105, the installation of a “Uni-Modem”- or WAN driver is possible. Basically, we recommend to use the WAN driver. How can I use the Capi? After the installation the Capi is automatically activated (white/blue icon in the Systray). The main functionality of the Capi is the allocation of a defined interface for other communication programs. If you click on the icon with the right mouse button, you’ll get the options in the context menu. Do I have to install a Capi for an online connection? No, the Capi provides a defined interface for other communication programs (e.g. the Talk&Surf fax drivers). The online connection is possible with the “WAN drivers”. If there is a wireless connection between the base station and the USB adapter DECT, Gigaset M101 or Gigaset M105, the installation of a “Uni-Modem” driver is possible. With these driver (available on the product under “gigaset-usb-adapter”) a modem for the particular interface will be installed. Please note the FAQ’s for the online connection. FAQ`s

26. Gigaset Communications is a trademark licensee of Siemens AG. © Gigaset Communications Stephan Kremer CC Frontline 03/08/2015 26 Is it possible to install multiple ISDN Adapters on my computer? No, only one Capi can be installed on a computer at the same time. If an ISDN adapter has already been installed or another ISDN adapter should be installed, you can expect that the additional adapter or the Siemens DECT base does not work. Can I send or receive faxes via DECT? Basically, faxing should be possible. While faxing with a wireless connection, the running time of the signals can cause problems during the fax transmission. Can I use the PC application to make phone calls from my pc? With the installation of the drivers of the base station, automatically so called TAPI drivers are installed. These drivers enable the forwarding of a phone number to a preselected internal user (phone). Only the phone number is forwarded to the phone, the conversation is held at with the phone FAQ`s

27. Gigaset Communications is a trademark licensee of Siemens AG. © Gigaset Communications Stephan Kremer CC Frontline 03/08/2015 27 How can I dial a phone number from a pc application like Outlook? To be able to dial a number from a pc application the following requirements have to be met: The ISDN base station must be connected and installed on the pc. The pc application must support TAPI (Outlook supports TAPI) The following example shows the configuration within Outlook, other applications are configured similar: FAQ`s

28. Gigaset Communications is a trademark licensee of Siemens AG. © Gigaset Communications Stephan Kremer CC Frontline 03/08/2015 28 Make sure that the correct internal number is chosen for this application. To do so open the Talk & Surf application and go to the section: “Configuration – Base settings – Assignments”. Activate the option “Connect phone to the pc” and choose the appropriate internal number from the list. FAQ`s

29. Gigaset Communications is a trademark licensee of Siemens AG. © Gigaset Communications Stephan Kremer CC Frontline 03/08/2015 29 Open Outlook. Open the Contacts and choose the contact you would like to call. Click on the telephone symbol in the menu bar or open it through “Actions – Call contact” and choose the number you would like to dial. FAQ`s

30. Gigaset Communications is a trademark licensee of Siemens AG. © Gigaset Communications Stephan Kremer CC Frontline 03/08/2015 30 Now the window “New Call” will open. Open the “Dialing Options”. FAQ`s

31. Gigaset Communications is a trademark licensee of Siemens AG. © Gigaset Communications Stephan Kremer CC Frontline 03/08/2015 31 Under “Connect Using”, choose the “Line 0 on hub device” and confirm with “OK”. Now you can choose “Start Call” to start dialling. The telephone number will be transferred to the internal device which was chosen before. FAQ`s

32. Gigaset Communications is a trademark licensee of Siemens AG. © Gigaset Communications Stephan Kremer CC Frontline 03/08/2015 32 Contact Stephan Kremer CC Frontline Tel.: +49 (2871) 91-3070 Email: stephan.kremer@gigaset.com