1. Design Wireless Network 2
Chapter 8
Wireless LAN Network Setup

2. Design Wireless Network 2
Ad-hoc Networking

3. Design Wireless Network 2
Use Cases

4. Design Wireless Network 2
Possibilities
Telephones (cellular, cordless, other)
Cordless multimedia (headsets, speakers, mic.)
Portable computers (Laptops, desktop, other)
Cordless computer peripherals (keyboard, mouse)
LAN – Local Area Network peripherals (printer, fax)
PDAs - Personal Digital Assistants (palm top/pilot)
Digital cameras

5. Design Wireless Network 2
Ad-…what?
Ad-hoc network…
…a LAN or other small network,
…with wireless connections
…devices are part of the network only for the duration of a communications session
Or …while in close proximity to the network

6. Design Wireless Network 2
LAB 3
Windows 8
Adhoc Wireless LAN

7. Design Wireless Network 2
Step 1: Launch an elevated command prompt under Windows 8 (one with administrator privileges).
Step 2: Run the following command to verify that your network interface supports virtualization: netsh wlan show drivers
If Hosted network supported says Yes, you’re all set. Otherwise, you need to upgrade your hardware, if the software update doesn’t fix it.

8. Design Wireless Network 2
Step3: Now, set up the ad hoc wireless network using this command. Replace the parts in markup tags with your own choices
netsh wlan set hostednetwork mode=allow ssid=<enter_network_name_here> key=<enter_password_here>
3 channel Plan at 2.4 GHz

9. Design Wireless Network 2
Step 4: Until now, your hosted network has been created. Now, you need to start it. Use the command below:
netsh wlan start hostednetwork
3 channel Plan at 2.4 GHz

10. Design Wireless Network 2
Step 5: You’re all set, with just one thing remaining. If it’s not already enabled, you need to allow Internet Connection Sharing (ICS) for your currently-active internet connection. Simply head over to Network & Sharing Center, and in the properties for the current internet connection, enable ICS. Make sure to select the ad hoc connection under Home networking connection.
3 channel Plan at 2.4 GHz

11. Design Wireless Network 2
Infrastructure Networking
3 channel Plan at 2.4 GHz

12. Design Wireless Network 2
LAB 4
Config Access Point TP-Link TL-WA 601G
Basic Setting
Network – LAN
Wireless - Basic Setting - SSID
- Region
- Channel
- Mode
- Wireless Mode - Disable Wireless
- Access Point -Enable SSID Broadcast
- Client
- Enable WDS
- SSID
- MAC of AP
Basic Setting

13. Design Wireless Network 2
LAB 4-2
Config Access Point TP-Link TL-WA 601G
Basic Setting
- Wireless Mode
- Repeater
- MAC of AP
- Universal Repeater
- Bridge (Point to Point)
- With AP Mode
- Bridge (Point to Multi Point)
- MAC of AP (1-6)
3 channel Plan at 2.4 GHz
AP Mode

14. Design Wireless Network 2
LAB 4-3
Config Access Point TP-Link TL-WA 601G
Basic Setting
- Security Setting
- Disable Security
- WEP
- Type
- WEP Key Format
- Hexadecimal
- ASCII
- Key Selected , WEP Key , Key Type
- MAC of AP
- WPA/WPA2
- Version
- Encryption
3 channel Plan at 2.4 GHz
Security

15. Design Wireless Network 2
LAB 4-4
Config Access Point TP-Link TL-WA 601G
Basic Setting
- Security Setting
- WPA/WPA2
- Radius Server IP
- Radius Port
- Radius Password
- Group Key Update Period
- WPA-PSK/WPA2-PSK
- Version
- Encryption
- PSK Passphrase
3 channel Plan at 2.4 GHz
Security

16. Design Wireless Network 2
LAB 4-5
Config Access Point TP-Link TL-WA 601G
Basic Setting
- MAC Filtering
- Enable / Disable
- Allow
- Deny
ID MAC Address Status Privilege
- Wireless Statistics
Security

17. Design Wireless Network 2
LAB 4-6
Config Access Point TP-Link TL-WA 601G
Advance Setting
- DHCP
- DHCP Setting
- DHCP Server Enable/Disable
- Start IP Address
- End IP Address
- Address Lease Time
- Default Gateway
- Default Domain
- Primary DNS
- Secondary DNS
3 channel Plan at 2.4 GHz
Advance Setting

18. Design Wireless Network 2
LAB 4-7
Config Access Point TP-Link TL-WA 601G
Advance Setting
- DHCP
- DHCP Client List
- Address Reservation
ID MAC Address Reserved IP Address Status Modify
- Wireless Setting
- Enable AP Isolation
- Disable short preamble
- RTS Threshold
- Fragmentation Threshold
- Beacon Interval
- Power
3 channel Plan at 2.4 GHz
Advance Setting

19. Design Wireless Network 2
LAB 4-8
Config Access Point TP-Link TL-WA 601G
Maintenance
- System Tool
- Firmware
- Factory Default
- Backup & Restore
- Reboot
- Password
- syslog
3 channel Plan at 2.4 GHz
Maintenance

20. Design Wireless Network 2