1. 5.8m Solar House Installation Instruction

2. Introduction Step 1. connect the corner panels Step 2. connect the back and side wall panels Step 3. Install the roof Step 4. Install the slopping wall (front wall) Step 5. assemble the PVC profile inside the house Step 6. assemble the corner aluminum plastic profile Step 7. Install the door lock Step 8. seal all the gap Extra explanation about the solar panel connection

3. Step 1. connect the corner panels Put the 2 corner panels together, drill & rivet them

4. Step 2. connect the back and side wall panels Connect the panels as the pictures shown below

5. Step 3. Install the roof Install the roof profile first Put the roof on, drill & rivet them

6. Step 4. Install the slopping wall (front wall) Install the wall panel as the picture shown

7. Step 5. assemble the PVC profile inside the house After rivet all the panel connection, put all the PVC profile on as the picture shown

8. Step 6. assemble the corner aluminum plastic profile 1. Finish view at this stage 2. Use the black glue to put the corner profile on the outside house corner and the bottom part.

9. Step 7. Install the door lock Look at the single door lock installation instruction.

10. Step 8 seal all the gap Seal all the gap between panels by using the black glue Finish the house installation

11. Extra explanation The panel connection place is where to install the solar panel

12. finish