1. 0 - 1 © 2007 Texas Instruments Inc, Content developed in partnership with Tel-Aviv University From MATLAB ® and Simulink ® to Real Time with TI DSPs Amplitude Modulation

2. Slide 2 © 2007 Texas Instruments Inc, Amplitude Modulation Amplitude Modulation is a process where the amplitude of a carrier signal is altered according to information in a message signal. The frequency of the carrier signal is usually much greater than the highest frequency of the input message signal.

3. Slide 3 © 2007 Texas Instruments Inc, AM – Basic Definitions The AM signal The modulating signal: The Carrier Signal:

4. Slide 4 © 2007 Texas Instruments Inc, AM – Basic Definitions (cont.) The Envelope: The AM Signal

5. Slide 5 © 2007 Texas Instruments Inc, The AM Spectrum Carrier Side Bands

6. Slide 6 © 2007 Texas Instruments Inc, AM Modulation Scheme +X

7. Slide 7 © 2007 Texas Instruments Inc, Square-Law Demodulation

8. Slide 8 © 2007 Texas Instruments Inc, Coeherent Demodulation X

9. Slide 9 © 2007 Texas Instruments Inc, Hands-On Simulation Implementation using the DSK6713

10. Slide 10 © 2007 Texas Instruments Inc, The Simulation Environment Modulator Virtual Scope Demodulator Information Signal Demodulated Signal

11. Slide 11 © 2007 Texas Instruments Inc, The Simulation Environment

12. Slide 12 © 2007 Texas Instruments Inc, Real Time Environment DSK6713 CODEC TMS320C6713 AM Modulator D/A (Left) AM Demodulator A/D (Left) A/D (Right) D/A (Right) Line In Line Out Signal Generator Scope PC RTDX

13. Slide 13 © 2007 Texas Instruments Inc, GUI

14. Slide 14 © 2007 Texas Instruments Inc, SQRT Detector – Real Time

15. Slide 15 © 2007 Texas Instruments Inc, Coherent Detection – Real Time

16. Slide 16 © 2007 Texas Instruments Inc, Configurable Carrier