1. Low Cost Fundus Camera P15590 December 11th, 2014
Presented by: Daniel Sui, Ian Morency, Kevin Labourdette, Kyle Burden, Thomas Casero, Quang Huynh
December 11th, 2014
Presenter: Kyle
Individually introduce ourselves!

2. Overview Status Review Requirement Status and Action-Items
Risk Assessment Comparison
MSD I Plan Review and MSD II Plan
Key Action Items
Presenter:

3. Status Review Current State: Most requirements ready to move to MSD II
Some re-evaluated as out of scope
Major scope change
Proof of concept prototype
High level product design
Stretch goal for this project iteration
Presenter: Tom

4. Req. Status: Industrial Design
Can be Completed
Separate from camera module
Beta Project
Presenter:

5. Action Items: Industrial Design
Create two mockups
Analysis of stability and portability
Dependant on Optics
Talking to healthcare professionals
Presenter:

6. Req. Status: Optical Design
Optical Subsystem still “black box”
All subsystems dependent on black box
High level design in place
Feasibility must be tested
Can use borrowed components
Presenter:K daddy labs

7. Action Items: Optical Design
Preliminary testing
Use borrowed components
Alter/iterate design
Budget finalization
Depends on optics, large cost
Current needs: ~$ borrowed components
Presenter:

8. Req. Status: Camera Camera/adaptive optics must be selected
Allow Pedro to move forward
Control systems can then be evaluated
Motor controls, speed etc.
Alignment system can move forward
Presenter:

9. Action Items: Camera Initial testing with RPi
Review what can be used from RPi camera library
Presenter: Kyle

10. Req. Status: Electrical Components
Preliminary design has been completed
Some parts already purchased
Will be doing initial testing of RPi, camera module, and motors over break and first few weeks of MSD II
Presenter:

11. Action Items: Electrical Components
Stepper Motors
Design mechanism to control stepper motor
Ensure precision
System Power
Ensure RPi can support attached systems
Presenter:

12. Action Items: Electrical Components
Items to be Purchased
7” Touch screen w/ power supply: Need to order
Stepper Motors: Order after optical system finalized
Begin software development and testing of RPi microcontroller
Presenter:

13. Req. Status: Other
These requirements are currently out of scope for MSD II
On our minds during design/build/testing
Finalize requirements in beta project
Presenter:

14. Risk Assessment Comparison
System Design Phase Risk Assessment
Presenter: Dan
Short

15. Risk Assessment Comparison
Current Risk Assessment
Presenter: Dan

16. Risk Assessment Comparison
Presenter: Dan

17. MSD I Plan Review
Presenter: Kyle

18. MSD I Deliverables All MSD I deliverables met
Some deliverable expectations moved to MSD II
Passed off of re-evaluation of final goals
Edge fully updated by Friday 12 Dec. 2014
Presenter:

19. MSD II Plan
Presenter: Kyle

20. Key Action Items Optical Systems Secondary Subsystems Complete Design
Pedro returns 19th Jan
Order Parts
Worst lead time
Secondary Subsystems
Preliminary testing over break
RPi, camera module, motors
Parts Ordered or Ready to Order
Develop/Test to be ready to integrate with Optics
Presenter:

21. Summary Status Review Requirement Status and Action-Items
Risk Assessment Comparison
MSD I Plan Review and MSD II Plan
Key Action Items
Presenter:

22. Questions