1. CPIT 470 Lab 2
Lab Instructor: Aisha Ehsan

2. Lab 2: Building Small Network Topology
Outline of this lab:
Building small network topology with two networks using Packet Tracer.
Verifying the connectivity between the networks.
Assignment: Building a network topology with 4 networks

3. Lab 2: Building Small Network Topology
Router
/ 25 /
Switch 1
Switch 2
PC 1
PC 2
PC 3
PC 4

4. Lab 2: Building Small Network Topology
Router
Fa 0/0
Fa 0/1
Switch 1
Switch 2

5. Lab 2: Building Small Network Topology
Configure the Ethernet interfaces of the routers (Gateways):
Router(config)# interface Fa 0/0
Router(Config – if)# ip address
Router(Config – if)# description Connection to East LAN
Router(Config – if)# no shutdown
Router(Config – if)#end
View the interface is up with the assigned IP address
Router# show ip int brief

6. Lab 2: Building Small Network Topology
Verify the connectivity:
Using ping command, verify the connectivity between two networks.
ping xxx
Verify the Routing Table of Router:
Router# show ip route

7. Assignment