1. طراحی مدارهای منطقی نیمسال دوم 92-93 دانشگاه آزاد اسلامی واحد پرند

2. طراحی مدارهای منطقی دانشگاه آزاد اسلامی واحد پرند ICs (Mux, Decoder, ROM, PLA, PAL)

3. Where are we?  Far now  Basic logic design  More complex integrated circuits (ICs)  Integrated circuits  Small-Scale Integration (SSI) Packages  typically contain one to four gates, six inverters, or one or two flip-flops  Medium-Scale Integration (MSI) Like  adders, multiplexers, decoders, registers, and counters Package  12 to 100 gates  Large-Scale Integration (LSI) Package  100 to a few thousand gates  Very-Large-Scale Integration (VLSI) Packge  Several thousand gates or more

4. Contents  Multiplexer  Three-state buffer  Decoder, Encoder  ROM  PLD  PLA  PAL  CPLD  FPGA

5. Multiplexer (MUX)  Multiplexer  A group of data inputs  A group of control inputs  The control inputs are used to select one of the data inputs and connect it to the output terminal

6. Multiplexer (MUX)  Multiplexer

7. Multiplexer (MUX)  Multiplexer 4:1  With Mux 2:1  Multiplexer 8:1  With Mux 2:1

8. Multiplexer (MUX)  Applications  Data selector =

9. Multiplexer (MUX)  Applications  Implement general logic functions

10. Multiplexer (MUX)  Multiplexer  High/low output  High/low enable

11. Three-State Buffer  Buffer  A gate output can only be connected to a limited number of other device inputs without degrading the performance of a digital system.  A simple buffer may be used to increase the driving capability of a gate output

12. Three-State Buffer  Three-State Buffer = Tri-State Buffer  Normally, a logic circuit will not operate correctly if the outputs of two or more gates or other logic devices are directly connected to each other  Use of three-state logic permits the outputs of two or more gates or other logic devices to be connected together  B open  High-impedance = Hi-Z

13. Three-State Buffer  Three-State Buffer = Tri-State Buffer

14. Three-State Buffer  Data selection

15. Three-State Buffer  4-Bit Adder with Four Sources for One Operand  Integrated Circuit with Bi-Directional Input-Output Pin

16. Decoder/Encoder  Decoder  n to 2 n  Generates all 2 n minterms/maxterms of the three input variables  Exactly one of the output lines will be 1 for each combination of the values of the input variables

17. Decoder/Encoder  4 to 10 Decoder

18. Decoder/Encoder  Example

19. Decoder/Encoder  Encoder  Reverse function of decoder  8-to-3 Priority Encoder

20. ROM  Read-Only Memory  An array of semiconductor devices that are interconnected to store an array of binary data  Data can be read out whenever desired, but the stored data cannot be changed under normal operating conditions

21. ROM  Read-Only Memory  Typical  32× 4, 512× 8

22. ROM  Read-Only Memory  One possible internal structure of 8× 4 ROM

23. ROM  Read-Only Memory  Example  Multiple-output combinatorial circuits

24. PLD  Programmable Logic Device  PLD  a general name for a digital integrated circuit  capable of being programmed to provide a variety of different logic functions  Changes in the design can easily be made by changing the programming of the PLD without having to change the wiring in the system

25. PLD  Programmable Logic Device  PLA  Programmable Logic Array  PLA with n inputs and m outputs can realize m functions of n variables

26. PLD  Programmable Logic Device  PLA  Programmable Logic Array

27. PLD  Programmable Logic Device  PLA  Programmable Logic Array

28. PLD  Programmable Logic Device  PAL  Programmable Array Logic  Special case of PLA AND array is programmable and the OR array is fixed Less expensive than PLA Easier to program

29. PLD  Programmable Logic Device  PAL  Programmable Array Logic  Example  Full-Adder

30. PLA vs. PAL vs. ROM  PLA/PAL  AND array  ROM  decoder  PLA/PAL  SOP  ROM  Truth table ANDOR PLAProgrammable PALProgrammableFixed ROMFixedProgrammable