Presentation is loading. Please wait.

Presentation is loading. Please wait.

FSTS Leak Rate Qualification Procedure J. Botelho Direito EN/CV/PJ 29/11/2012 FSTS - Leak Rate Qualification Procedure.

Published byStephen George Modified over 9 years ago

Similar presentations

Presentation on theme: "FSTS Leak Rate Qualification Procedure J. Botelho Direito EN/CV/PJ 29/11/2012 FSTS - Leak Rate Qualification Procedure."— Presentation transcript:

1 FSTS Leak Rate Qualification Procedure J. Botelho Direito EN/CV/PJ 29/11/2012 FSTS - Leak Rate Qualification Procedure

2 Leak Rate Qualification Process 29/11/2012 FSTS - Leak Rate Qualification Procedure

3 Maximum Leak Rate for the FSTS He Leak Rate [mbar.l/s] (inlet pressure of 0.1 mbar) Number of connections (or locations to be tested) Maximum leak rate per connection Condenser3.47x10 -3 301.16x10 -4 Vapour line5.62x10 -3 301.87x10 -4 Liquid line3.22x10 -4 2001.61x10 -6 Brine Circuit1.53x10 -4 1001.53x10 -6 29/11/2012 FSTS - Leak Rate Qualification Procedure

4 Validation Pressure Test 29/11/2012 FSTS - Leak Rate Qualification Procedure Thermosyphon Circuit – Return LineThermosyphon Circuit – Condenser

5 Validation Pressure Test 29/11/2012 FSTS - Leak Rate Qualification Procedure Thermosyphon Circuit – Liquid LineBrine Circuit

Download ppt "FSTS Leak Rate Qualification Procedure J. Botelho Direito EN/CV/PJ 29/11/2012 FSTS - Leak Rate Qualification Procedure."

Similar presentations

13 mm (1/2) PRO-FLO X ORIGINAL METAL UL 79 LISTED PUMP.

13 mm (1/2) PRO-FLO X ORIGINAL METAL UL 79 LISTED PUMP.
TROUBLESHOOTING. 5WSS TROUBLESHOOTING ERROR CODEFAULTY INDICATION E1ROOM SENSOR CONTACT LOOSE E2INDOOR COIL SENSOR CONTACT LOOSE E3WATER OUTLET SENSOR.

TROUBLESHOOTING. 5WSS TROUBLESHOOTING ERROR CODEFAULTY INDICATION E1ROOM SENSOR CONTACT LOOSE E2INDOOR COIL SENSOR CONTACT LOOSE E3WATER OUTLET SENSOR.
PRESSURE TEST Hook tester up to tank inlet line. Pump tester up to 10psi (.7 bar) The line and carb should hold pressure for 1-min. Checks for leaks at.

PRESSURE TEST Hook tester up to tank inlet line. Pump tester up to 10psi (.7 bar) The line and carb should hold pressure for 1-min. Checks for leaks at.
FSTS “water hammer” Running mode Pressure profile of the “water hammer” pulse – Joukowsky Equation FSTS Running worst case scenario : – instant closing.

FSTS “water hammer” Running mode Pressure profile of the “water hammer” pulse – Joukowsky Equation FSTS Running worst case scenario : – instant closing.
6/3/2015Auke-Pieter Colijn1 C3F8 NIKHEF Design Compare Does it work?

6/3/2015Auke-Pieter Colijn1 C3F8 NIKHEF Design Compare Does it work?
Elevation It gets colder the higher in elevation you go. As air rises, it expands because of lower air pressure. As the air expands, it cools. When air.

Elevation It gets colder the higher in elevation you go. As air rises, it expands because of lower air pressure. As the air expands, it cools. When air.
Spiral Condensors. Working Principle The Spiral Condensor consists of two sheets stainless steel strips which have been wounded from the centre.

Spiral Condensors. Working Principle The Spiral Condensor consists of two sheets stainless steel strips which have been wounded from the centre.
34 42 49 51 53 55 57 63 67 69 71 73 77 83 Given Connections Solution 1 2 3 4 5 6 95.

Given Connections Solution
Thermosyphon - Free Cooling

Thermosyphon - Free Cooling
Condenser supply contract report Jose Botelho Direito EN/CV/DC Thermosyphon cooling workshop §5 Thursday, October 20, 2011.

Condenser supply contract report Jose Botelho Direito EN/CV/DC Thermosyphon cooling workshop §5 Thursday, October 20, 2011.
Colligative Properties

Colligative Properties
Theodore Todorov Pixel mechanics november 8th 2010 1 Inner detector upgrade / IBL Activities on cooling LAPP LAPP team Jacky Ballansat, Patrick.

Theodore Todorov Pixel mechanics november 8th Inner detector upgrade / IBL Activities on cooling LAPP LAPP team Jacky Ballansat, Patrick.
M. Battistin – 1 st September 2009 EN/CV/DC 1 M. Battistin (EN/CV/DC) 1 st October 2009 ATLAS cooling Group - Thermosiphon solution for ATLAS ID cooling.

M. Battistin – 1 st September 2009 EN/CV/DC 1 M. Battistin (EN/CV/DC) 1 st October 2009 ATLAS cooling Group - Thermosiphon solution for ATLAS ID cooling.
CO2 cooling pressure drop measurements R. Bates, R. French, G. Viehhauser, S. McMahon.

CO2 cooling pressure drop measurements R. Bates, R. French, G. Viehhauser, S. McMahon.
1 Air Conditioning Pressure Switches. 2 High Pressure switch Used to protect the compressor When condensing temp gets too high Reads High Side Pressure.

1 Air Conditioning Pressure Switches. 2 High Pressure switch Used to protect the compressor When condensing temp gets too high Reads High Side Pressure.
Some results of vacuum stand investigation.. 1. Restoration of turbopump inlet valve V1 tightness The inlet turbopump valve of the first pump station.

Some results of vacuum stand investigation.. 1. Restoration of turbopump inlet valve V1 tightness The inlet turbopump valve of the first pump station.
Pierre Bonneau EN/CV/DC

Pierre Bonneau EN/CV/DC
Tracker Thermal Control System 2015年9月13日星期日 2015年9月13日星期日 2015年9月13日星期日 1 AMS-TTCS Status Report AMS-TIM meeting, CERN, Oct.28 th, 2008 ZH He On behalf.

Tracker Thermal Control System 2015年9月13日星期日 2015年9月13日星期日 2015年9月13日星期日 1 AMS-TTCS Status Report AMS-TIM meeting, CERN, Oct.28 th, 2008 ZH He On behalf.
Detector Cooling Project Thermosiphon Project Status Report

Detector Cooling Project Thermosiphon Project Status Report
1 Liquid Hydrogen R&D test report Video Conference – 23/08/12 S Watson P Warburton M Courthold.

1 Liquid Hydrogen R&D test report Video Conference – 23/08/12 S Watson P Warburton M Courthold.

Similar presentations

Ads by Google