1. APPLICATIONS MILLING MACHINE CONTROL SYSTEMS LAYOUT FOR SUPER-ELEVATED CURVES PAVER CONTROLS POTENTIAL PROBLEMS

2. USING MILL TO REMOVE AND PULVERIZE EXISTING SHOULDER

3. View of the Drum and Teeth

4. USING THE MILL TO ACHIEVE A SMOOTH RIDE IN URBAN AREAS

5. PROFILING ROADWAY 1” OVERLAY

6. A1A @ DUNLAWTON AVE

7. CONTROL SYSTEMS SLOPE CONTROL ENDGATES AND THE YO-YO SWITCH SONIC GROUND SENSOR SINIC SKI

8. YO-YO SWITCH ATTACHED TO THE ENDGATE

9. SENSOR SETTING FOR DEPTH

13. MILLING CROSS-SLOPE

14. CROSS-SLOPE MILLING

15. CROSS-SLOPE REACTING TO SLOPE CHANGE

16. HOW THE MILLING OPERATOR CUTS A SUPERELEVATED CURVE

19. Milling around curves, manholes and multiple passes

20. PROBLEMS THAT CAN OCCUR ENDGATE/ SENSOR RUNS OFF UNEVEN SURFACE DAYLIGHT MILL DUE TO VARYING CROSS-SLOPE MILL INTO LIMEROCK BASE DROP-OFF BETWEEN ADJACENT TRAFFIC LANES EXISTING SHOULDER DOESN’T MATCH NEW FINISH GRADE USING WRONG STATION FOR START OF SUPERELEVATION

21. PAVING CONTROLS

22. THE CONTROL SYSTEM OPERATES A HYDRAULIC CYLINDER THAT CHANGES THE ANGLE OF ATTACK OF THE SCREED

23. A PAIR OF SCREWS ARE ALSO USED TO MANUALLY ADJUST THE THICKNESS OF THE PAVING

24. PAVER SLOPE CONTROL

25. SONIC SLOPE CONTROL

26. SKI POLE FOR PAVER

27. RIGID STRAIGHTEDGE