1.  Finalize cadet image on 2D Design.  Summarize important points for using 2D Design  Observe set up and running of the laser cutter.  Compare the quality of the laser cutter to the Roland MDX-40. 2D Design Support 1. Use the path tool to draw around the shape 2. Cross all lines to make a point. There must be NO holes in the green outline.

2.  Finalize cadet image on 2D Design.  Summarize important points for using 2D Design  Observe set up and running of the laser cutter.  Compare the quality of the laser cutter to the Roland MDX-40. 3. Delete the extra lines 4. There must be NO holes in the green outline. 2D Design Support

3.  Finalize cadet image on 2D Design.  Summarize important points for using 2D Design  Observe set up and running of the laser cutter.  Compare the quality of the laser cutter to the Roland MDX-40. 5. To fill parts for engraving 6. Click ‘Bound Fill’ 7. Press ok 2D Design Support

4.  Finalize cadet image on 2D Design.  Summarize important points for using 2D Design  Observe set up and running of the laser cutter.  Compare the quality of the laser cutter to the Roland MDX-40. 5. To fill parts for engraving 6. Click ‘Bound Fill’ 7. Press ok 2D Design Support

5.  Finalize cadet image on 2D Design.  Summarize important points for using 2D Design  Observe set up and running of the laser cutter.  Compare the quality of the laser cutter to the Roland MDX-40. 8. Are there any parts not colored? 9. Click ‘No’ 2D Design Support

6.  Finalize cadet image on 2D Design.  Summarize important points for using 2D Design  Observe set up and running of the laser cutter.  Compare the quality of the laser cutter to the Roland MDX-40. 11. Click ‘OK’ 2D Design Support 10. The hole for the key fob. (Inside cut: RED) 12. Draw the circle

7.  Finalize cadet image on 2D Design.  Summarize important points for using 2D Design  Observe set up and running of the laser cutter.  Compare the quality of the laser cutter to the Roland MDX-40. Inside Cut - RED 2D Design Support Engraved - BLACK Outside cut - GREEN

8. LASER CUTTER INSTRUCTIONS  Draw your design on 2D Design.  Change the line colors

9. LASER CUTTER INSTRUCTIONS  Use black, red and green from the bottom box

10. LASER CUTTER INSTRUCTIONS  To set up the laser cutter

11. LASER CUTTER INSTRUCTIONS

15. COLORSPEEDPOWER 100 0.5100 0.5100

16. TO FINISH