1. UNIT 11 - LANDSCAPE PAVERS

2. LANDSCAPE PAVERS Standard Size 4X8

3. LANDSCAPE PAVERS Paving brick are much different than building brick, based on their firing process.

4. Building brick are fired at lower temperatures for shorter periods of time. They contain higher water content, are more porous and therefore absorb more water.

5. That’s why building brick are inferior for paver construction. They lack compression strength, and can absorb 3X their weight in water, causing them to crack and disintegrate.

6. Paver Brick are fired at higher temperatures, which produces higher compression strength, deeper color, and lower water content.

7. Paver Brick are created from two processes, The extruded process, and the molding process.

8. Molded brick are pressed into a mold. They produce an irregular shaped, and distinctive pattern.

9. Molded brick have a rough appearance, they may have a sandy - gritty surface. Sand is used as a lubricant to remove the brick from the mold.

10. The second process is Extruded brick. They have a smooth appearance, and sharp edges.

11. The soft brick are pushed through a machine orifice. The bricks are then sliced with a wire to their 2” dimension.

12. The Manufacturing Process

13. Common Paver Patterns

14. Site Preparation Soil Compaction Static Vibratory Impact

15. Hand Jumpin Jack

16. Wacker Plate Vibratory Bomag Roller

17. Static Asphalt Roller