1. VeriFire Tools Network Diagnostic Utility

2. Overview
Allows user to check various statistics and software versions of panels and DVC’s.
Only available in online mode

3. Network Statistics
Shows a view of all the traffic within the network as your selected node sees it.  
When you initiate this service, you have the option to view the entire network or one other selected node through this "node’s eye view".  
Checking the "Reset All Nodes" option clears all previous network responses in the statistics screen.
NOTE: This services requires a network node be designated as a point of reference before you monitor the network.

7. NUP Port Statistics
Displays the total number of messages transmitted to and from an individual node on the network.
Contact NOTIFIER Technical Services to use the information in both of these services to diagnose problems that may occur within your network.

8. NUP Port Statistics

9. Software Versions
Displays version numbers of software currently installed on either a selected node or all nodes in the network.
Incompatible or out-of date software is highlighted.  

10. Software Versions

11. Software Versions

12. VDSL Statistics
Opens the HS-NCM VDSL Statistics Service to view network traffic statistics.

13. VDSL Statistics

14. Ethernet Statistics
Opens the Ethernet Statistics Service screen, displaying Ethernet statistics to verify integrity and troubleshoot network wiring.   Available for high-speed (HS-NCM) networks only.

15. Export All Statistics
Exports all statistics, except for the DAP statistics, to an Excel spreadsheet

16. Export All Statistics

17. Export All Statistics

18. Export All Statistics

19. Network Test
Runs a communication test between selected nodes on the network.  
The test procedure will be aborted if a real event occurs anywhere on the network.
There should be no activity on the network before performing the test.

20. Network Test Software Versions need to be correct
Network needs to be in style 4
Verfire needs to be connected to an end node
MUST know the network layout (which node is connected to which)
Can debug by building network out or breaking network down

21. Network Test Make sure the wire is good before replacing parts
For the worst case scenario build a network out node by node
A network is not considered reliable if the network test fails
All nodes on the network should pass the network tests
Errors are only caught if they occur while a test is in progress.

22. Network Test

23. Network Test

24. Network Test

25. Network Test

26. Network Test

27. Network Test

28. Network Test

29. DAP Statistics
Displays current network statistics of the DAP communications between DVC and attached Digital Audio Loop (DAL) devices.

30. Only available on DVC V4.0 and above
DAP Statistics
Only available on DVC V4.0 and above

31. Export All DAP Statistics
Exports DAP statistics to an Excel spreadsheet, with a separate worksheet for each DVC node.

32. ? Blah,Blah,Blah, Blah,Blah,Blah. What was he talking about ?
Z z z z
z z z z
z z
Questions,
Comments,
Ideas ?
Basic Fire Alarm Technology