1. ONLINE CONFIGURATION

2. Configure the System Go to www.tigoenergy.com/ and press “Login”www.tigoenergy.com/ Have your site map or string list with barcodes

3. Use a barcode scanner to save time Easy to use, simply plug and play Configure the System

4. Log in Configure the System

5. Click on “New Installation” at the bottom Configure the System

6. Follow the instructions of the installation wizard Configure the System

7. Follow the instructions of the installation wizard Configure the System

8. Enter site information: Address Site owner information 3 rd party finance, if such exists Click Next Configure the System

9. Enter inverter information Configure the System

10. Enter inverter information Configure the System

11. Enter inverter information After choosing model the following will auto-fill Configure the System

12. Enter string information per chosen inverter Configure the System

13. Enter string information per chosen inverter Configure the System If you’re strings are uneven press

14. Enter string information per chosen inverter Configure the System If you’re strings are uneven press

15. And fill the number of modules per string Configure the System

16. If you’re using more than 1 inverter type, click “Add inverter” to add another one Configure the System

17. Once done scroll down to Module section Configure the System

18. Enter PV module information Configure the System

19. Enter PV module information Configure the System

20. Enter PV module information After choosing model the following will auto-fill Configure the System

21. Select connector type Configure the System

22. If using more than 1 PV module types, press ‘Add Module Type’ Configure the System

23. Once down scroll down to Management Unit section Configure the System

24. Enter Management Unit information Configure the System

25. Tigo MMUs have 12 digit MAC IDs Located on the bottom of the MMU You can use your barcode scanner to insert the MAC ID Configure the System

26. Once done, scroll back up and click ‘Next’ on the left Configure the System

27. Keep on your maps the Gateway’s MAC ID: Tigo MMUs have 16 digit MAC IDs Located on the on housing of gateway

28. Enter layout information Configure the System

29. Click the grid to begin placing the modules as they appear on the roof Configure the System

30. Click the grid to begin placing the modules as they appear on the roof Use the bottom part to choose how to place the modules Configure the System

31. You can place the module in portrait or landscape Configure the System

32. You can choose to place a single module per click, or a string at a click Configure the System

33. If you choose a string you’ll get to choose the direction in which the modules will be placed Configure the System

34. Once done with the physical layout it’s time to upload the barcodes Configure the System

35. Map with barcodes from the installation site should show how the panels are wired Configure the System

36. There are 2 ways to enter the barcodes: Configure the System

37. There are 2 ways to enter the barcodes: 1.By scanning or typing the barcodes in the upper section based on the map Configure the System

38. There are 2 ways to enter the barcodes: 2.By downloading a template, scanning barcodes into it while on site and later uploading it Configure the System

39. Once done uploading the barcodes you’ll see the modules have all turned green Configure the System

40. Press next Configure the System

41. Review summary and confirm Configure the System

42. You can download a map of your system Configure the System

43. You can download a map of your system Configure the System

44. And a table referencing of your map and barcodes Configure the System

45. And a table referencing of your map and barcodes Configure the System

46. Once done, press Finish Configure the System

47. And – You’re Done! Configure the System