1. Privacy-Preserving Data Aggregation in Smart Metering Systems Mi Wen Shanghai University of Electric Power miwen@shiep.edu.cn 8/8/2015 Zekeriya Erkin, Juan Ramón Troncoso-Pastoriza,R. (Inald) L. Lagendijk, and Fernando Pérez-González, Privacy-Preserving Data Aggregation in Smart Metering Systems, IEEE SIGNAL PROCESSING MAGAZINE [75] marc h 2013.

2. Outline 2 Trust Model and Smart Metering Architectures 2 Introduction 31 Four approaches of data aggregation 33 Challenges & Conclusion 34

3. It is clear that the actions of the residents can be easily tracked by analyzing the smart meter data (gas, water, and electric consumption). Security in smart metering One of the biggest advantages of smart grids compared to traditional energy grids is the ability to remotely read fine-granular measurements from each smart meter, which enables the grid operators to balance load efficiently.

4. Smart Metering Architectures Security in smart metering: Dutch Parliament in 2009 that rejects the deployment of smart meters due to privacy considerations. Hence, it is a “must” to enforce privacy rights without disrupting the smart grid services like billing and data aggregation. The main idea of Secure signal processing (SSP) is to prevent the untrustworthy entities, including the utility provider, from accessing the private data, while providing tools to process the smart meter measurements, e.g., for billing and data analysis. Cryptographic tools : holomorphic encryption and secure multiparty computation [19]

5. Smart Metering Architectures Secure billing: The utility provider receives encrypted measurements from the smart meters. Without the decryption key, the utility provider cannot access the content of the encryptions; this guarantees the privacy of the residents. To perform the usual smart grid operations such as billing, the utility provider interacts with the smart meters according to a predefined protocol [24], [17], [15]. Focus : particularly on the computation of aggregated consumption.

6. Stakeholders in a smart metering scenario 1,Consumers : access to the metered data 2,Smart metering devices: sense the consumed energy 3, Grid operator/supplier: load balancing 4,Communication network:be secured 5,Electricity producer: sells the electricity to customers 6,Aggregator: producing the relevant and needed figures

7. Smart Metering Architectures  There are two main choices of smart metering architecture: centralized and distributed.  Centralized management, sending the measurements of short periods to a central data storage that acts as a hub (aggregator head).  For small grids, like self-sufficient grids in rural areas, a distributed (or peer-to-peer) energy management is usually adopted.  the meters perform a partial data aggregation themselves (in-network aggregation).

8. Trust model  Inherent interdependency between trust and privacy: those entities of a smart metering system that are trusted will need no further privacy protection.  untrusted parties can be considered mainly semihonest or malicious.  Consumers suppliers/aggregator  The traditional sealed meters readable only at the customer’s home represented the mutual trust. Access legitimate Data correctness

9. Trust model  The adoption of smart metering reshapes the trust model depending on the choice of architecture.  Centralized management and data-collection imposes a universal trust on the grid operator(acting as aggregator).  “universal trust” leads to privacy invasion that infringes the data protection directives.  A certain level of decentralization, together with the possibility of collaborative calculations among the meters.

10. Outline 10 Privacy Model and Smart Metering Architectures 2 Introduction 31 Four approaches of data aggregation 33 Conclusion & Future works 34

11. 11 Goal: solutions should not hinder the ability of the aggregator to calculate the needed GS(t) and, at the same time, avoid the possibility of fraud. Three common assumptions: 1, communication network available. a wired communication link to the utility provider is required, smart meters are also assumed to be able to communicate with each other. 2, The possession of a valid certificate per smart meter 3. the capability of performing cryptographic operations Data aggregation

12. 12 System model: three customers: Alice, Bob, and Charles. Assume that a utility company (UC), which plays the roles of energy producer, grid, and network operator, Four approaches to aggregate Additively homomorphic encryption : pk= sk=. Drawbacks: the same key has to be used. for different smart meters, using the same key for encryption alone does not provide privacy protection.

13. 13 1, Using Holomorphic Encryption and Secret Sharing User : splitting their measurements into random shares, one share for each person: Keeping m 1,t (1) for herself, Alice sends m 1,t (2) and m 1,t (3) to the UC after encrypting them with Bob’s and Charles’ public keys. UC: Drawbacks: it is not scalable. Four approaches to aggregate

14. 14 Four approaches to aggregate

15. 15 2, Using Masking and Brute Forcing (con’t) Four approaches to aggregate There are four protocols that provide different ways for a number of smart meters Diffie-Hellman key exchange based random numbers generation. After verification of the public keys, everyone computes [18] K. Kursawe, G. Danezis, and M. Kohlweiss, “Privacy-friendly aggregation for the smart-grid,” in Privacy Enhanced Technologies Symposium, Waterloo, Canada,2011, pp. 175–191.

16. 16 3, Using Modified Homomorphic Encryption Assume that Alice, Bob, and Charles have three random numbers such that n1 +n2 +n3 =n. In such a case, Alice and the others can encrypt [8] Z. Erkin and G. Tsudik, “Private computation of spatial and temporal power consumption with smart meters,” in Proc. Int. Conf. Applied Cryptography and Network Security, Singapore, 26–29 June 2012, pp. 561–577. An aggregator, anyone in the group, can collect and form the total consumption: Drawbacks: should use the same random number r. The complexity is lower the scheme in [18].

17. 17 4, Using Masking and Differential Privacy the encryption is defined as E pk (m, k, n) =m+k mod n, where m is the measurement, k is the encryption key, and n is a large number. [4] G. Ács and C. Castelluccia, “I have a DREAM! (Differentially PrivatE smart Metering),” in Proc. Information Hiding Conference, 18–20 May 2011, pp. 118–132. The coupling between any two smart meter is bidirectional. They generate a random number, r i,j, and add to their measurements.

18. 18 4, Using Masking and Differential Privacy (con’t) Drawbacks: each smart meter has to share keys with the UC and exchange pseudorandom numbers with many other smart meters. Efficient.

19. Comparison 19 1 2 34

20. Challenges related to security  Malicious parties and tampering semi honest adversarial model, no forge results. unlikely real scenario.  Key management a common requirement that all the encrypted values be produced with the same key to be homomorphically “combinable”. losing authentication and possibility of forgeries. unusual key distribution, like the subkey, shared key. costly strategies like proxy-reencryption or encryption delegation.  Securing billing calculations 20 a posteriori rebates also will make customer feel uncomfortable.

21. Challenges related to signal processing  Complex utility functions Only summation function GS(t) is too simple. Complex functions including billing with nonlinear tariffs, to more complex statistical calculations related to profiling, load forecasting, state estimation, adaptive frequency estimation, or network modeling.  Accuracy loss There is a direct relationship [7] between the induced noise power (measurement accuracy) and the e level of differential privacy that the mechanism achieves. This tradeoff has to be carefully considered and evaluated for each utility function 21

22. Conclusion  This paper identifies the privacy problems in smart grids, summarize the recent research on data aggregation, and present an overview of existing research challenges for secure signal processing (SSP).  There is still room for improvement and further research in this area 22

23. 23 Thank you !