1. AASMIS – S (Autoconer Automation (Savio) MIS System )

2. Present Working

3. SAVIO MACHINE

4. Workers go and Notedown the readings on paper or gets the printout Watchout the Readings at each shift end

5. Read the readings and feed into computer

6. Impossible This is not possible to feed all the data into computer This is not possible to take it the printout of all the drums (because it will take 128 ft paper) per shift per machine. Comparison of all the parameters are not possible due to unavailable of data. Compare only the machine wise production, off time, speed and efficiency.

7. What is the Problem ? Without its maintain the machines on the basis of assumption. Delayed in Maintaining abnormal drums. Confusion and misunderstanding between the departments. Long term comparison is not possible to finding out the repetition of abnormalities. Drum wise data not available.

8. AASMIS – S (Autoconer Automation (Savio) MIS System ) Automation Working

9. What we do Interface Box Computer Only by pressing a Single key at the time of Shift end, Interface Box fetch the drum wise data from the printer and stored into PC

10. What we do The MIS software analyze all the data. It will prepared 30 various types of MIS, analytical and comparable statements. It will take only 1 hrs. time to process all the working after the ending of shift. Each and every user can view the reports on its PC and no need to required flow of papers.

11. Analysis of data Find out the M/c wise, lot wise, count wise production report. Find out the Abnormal drum data with specific reasons. Find out the Full MIC reports into 4-5 pages. Compare M/c to M/c, section to section, count to count and drum to drum data.

12. Benefits of System Highlights Abnormal/Rouge drums. Increased efficiency due to reduced drum down–time and hard waste. Achieve better quality due to reduced number of cuts. Eliminates expensive thermal paper and printers. Lot to Lot comparisons. Reduced typing & processing manpower. Long term storage & easy recall of data. Easy & faster reporting. Faster decision making. Elimination of duplicity. Unlimited intangible benefits of computerization.

13. Savings Saving in Thermal Paper Cost Increased Earning due to Increase in efficiency Reduction in Hard Waste Reduction in Manpower Costs

14. Earning Due to Increase in Efficiency and Reduction of Hard waste Increased Earning due to Increase in Efficiency Due to reduced drum down – time the expected efficiency increases by as much as 5%. Even if we expect a modest figure of 2%, this will lead to a increased production of 2%. Each Autoconer produces 2000 Kg. of yarn @Rs. 10 per Kg i.e. Rs. 20,000 per day. The increased earning due 2% efficiency will be Rs. 400 per day per Autoconer. Then the saving per autoconer in a year is Rs. 400 x 365 days = Rs. 1,46,000 Reduction of hard waste Due to maintaining of cuts, joints and cycles expected reduction of hard waste by 0.2%. Even if we expect a modest figure of 0.1%, this will lead to a increased production of 0.1%. Then the saving per autoconer in a year is Rs. 100 per Kg x 0.1% x 2000 Kg x 365 days = Rs. 73,000

15. Total Savings If we does not considered the paper saving cost and manpower cost then the total saving per machine would be More than Rs. 2 lacs due to improving of efficiency and reducing of hard waste.

16. Major Benefits Apart from the above savings, Maintain the better Quality of yarn at high speed and gets the Premium Rate.

17. Major Benefits Reduced / Maintain the Machine Maintenance Cost. So that increased the life of Machines.

18. Major Benefits No printouts required Each user can view the data at their Desktop. No need to visit in plant or gets the printout for viewing the data.

19. AASMIS – S (Autoconer Automation (Savio) MIS System ) The Beginning For getting better quality of yarn, getting more productions and reduction the maintenance cost