Presentation is loading. Please wait.

Presentation is loading. Please wait.

H.323/ SIP Internet Telephony Gateway

Similar presentations


Presentation on theme: "H.323/ SIP Internet Telephony Gateway"— Presentation transcript:

1 H.323/ SIP Internet Telephony Gateway
VIP-2/4/8/16/24 port Series P2P Configuration Copyright © PLANET Technology Corporation. All rights reserved.

2 VoIP Gateway Quick Configuration
This picture illustrates basic installation topology of gateway and IP phone for P2P mode.

3 VIP-480 Configuration 1 Select the [Advance - >WAN Setting ] of Gateway to set up the WAN interface for the gateway. 2 Setup the WAN interface of VIP-480 follow the information of IP that provides by ISP WAN Type Setting : Static IP IP Address : Subnet Mask : Default Router :

4 VIP-480 Configuration Select the [Advance -> VoIP Basic] of Gateway to set up the Port Number 3 4 Use default port number Port 1 100 Port 2 200 Port 3 300 Port 4 400

5 VIP-480 Configuration 5 6 Check Hunting Member Port 1 – Port 4
(When this Port1 is busying , the Gateway will find a free port connected to other) Click the [Save Configuration] button to save configuration

6 VIP-480 Configuration Select the [Advance -> Dialing Plan] of Gateway to add the outgoing dial plan for gateway call to IP phone used. Outgoing no: 111 / 500 (or other) Length of Number: 3 ~ 3 (The Number max/min allowed length you can dial ) Destination IP/DNS: / Destination Port : 5060 7 8

7 VIP-281 Configuration Select the [Advance - >WAN Setting ] of Gateway to set up the WAN interface for the gateway. 9 10 Setup the WAN interface of VIP-281 follow the information of IP that provides by ISP WAN Type Setting : Static IP IP Address : Subnet Mask : Default Router :

8 VIP-281 Configuration Select the [Advance -> VoIP Basic] of Gateway to set up the Port Number 11 12 Use default port number Port 1 500 Port 2 600 Check Hunting Member Port 1 – Port 2 (When this Port1 is busying , the Gateway will find a free port connected to other) 13 Click the [Save Configuration] button to save configuration 14

9 VIP-281 Configuration Select the [Advance -> Dialing Plan] of Gateway to add the outgoing dial plan for gateway call to IP phone used. Outgoing no: 111 / 300 / 400 Length of Number: 3 ~ 3 (The Number max/min allowed length you can dial ) Destination IP/DNS: / / Destination Port : 5060 15 16

10 VIP-350PT/VIP-550PT Configuration
Select the [Network] of IP Phone to set up WAN interface of the IP Phone. 17 18 Setup the WAN interface of VIP-350PT / VIP-550PT follow the information of IP that provides by ISP Fixed IP IP Address : Subnet Mask : Default Router :

11 VIP-350PT/VIP-550PT Configuration
Select the [SIP Setting - > 1st Domain] of IP Phone to set up phone number of the IP Phone. 19 20 Setup the phone number of VIP-350PT / VIP-550PT Login User ID: 111 Login Password : 123 Alias / Nickname : 111

12 VIP-350PT/VIP-550PT Configuration
Select the [Address Book] of IP Phone to create the address book. Phone1 21 Enter the address book into VIP-350PT/ VIP-550PT Phone1 Alias/Nickname/Display : 300 -like Address : Phone2 Alias/Nickname/Display : 500 VIP-480 Alias/Nickname/Display : 400 22 Phone2 23 VIP-480 24

13 Please press “Call” button directly to call out.
VIP-350PT/VIP-550PT Configuration Select the [Speed Dials] of IP Phone to create the speed dials. 25 0 : 1: 2: 26 Please press “Call” button directly to call out. 27

14 VIP-350PT/VIP-550PT Configuration
Select the [Speed Dials] of IP Phone to create the speed dials. 28 29 Please enable “DTMF” Relay by INFO

15 Test the Scenario Outgoing Call A (VIP-281)
Phone2 can press “300” to call Phone1. Phone2 can press “111” to call VIP-350PT/VIP-550PT. If Phone2 wish to make a call via PSTN line, Phone2 can press “400” to switch PSTN mode first, after hear dial tone Phone2 can dial “ ” to call out Phone3 via PSTN line. B (VIP-480) 1.Phone1 can press “500” to call Phone2. 2.Phone1 can press “111” to call VIP-350PT/VIP-550PT. 3.If Phone1 wish to make a call via PSTN line, Phone1 can press “400” to switch PSTN mode first, after hear dial tone Phone1 can dial “ ” to call out Phone3 via PSTN line.

16 Test the Scenario C (VIP-350PT/VIP-550PT)
1.There are three ways to call-out: Speed Dial, Favorite, or directly dial the “Phone Number+ IP Address” such as 300*192*168*0*1. Here, we use the Speed Dial for the example. 2.After setup Speed Dial, VIP-350PT/VIP-550PT can select “1” and then click “ Call” button to call out Phone2. 3.If VIP-350PT/VIP-550PT wish to make a call via PSTN line, VIP-350PT/VIP-550PT can select “2” to switch PSTN mode first, after hear dial tone VIP-350PT/VIP-550PT can dial “ ” to call out Phone3 via PSTN line. Incoming Call 1. Phone3 can press “ ” to call VIP-480 via PSTN line, and then press “300” to call Phone1, press “500” to call Phone2, and press “111” to call VIP-350PT/VIP-550PT.

17


Download ppt "H.323/ SIP Internet Telephony Gateway"

Similar presentations


Ads by Google