1. http://www.axis.com 802.11b Access Point and Device Point Technical training

2. Agenda  System Overview  Marketing information  WLAN Technology  Security  802.11b Access point  802.11b Device Point  Hands on Training

3. System Overview

4. The 802.11b Access Point is connected on the main network. The Camera is connected to the 802.11b Device Point.

5. System Overview Access Point Wired Network Device Point Internet Device Point

6. *Today only one device can be connected to the Device Point through the network interface but a future SW-release will (probably) contain multiple device support. This is not a big issue in our customers cases. Our customers will probably only connect one camera to each Device Point. Future overview

7. Access Point Wired Network Device Point Wired Network Internet Multi-Client Support (will probably be available) Device Point

8. How to connect the 802.11b Access Point  Connect the 802.11b Access Point on the main network.  Configure the 802.11b Access Point from a computer on the main network (Smart AP utility)  Configure the network parameters and the Security- settings.

9. How to connect the Camera to the 802.11b Device Point  Use a cross over connected UTP Ethernet cable to connect the Camera Server to the Device Point.  The 802.11b Device Point is a bridge (converter) between cabled Ethernet and wireless Ethernet (IEEE 802.11b).  Today only one camera can be connected to each Device Point.

10. Marketing information

11. 802.11b Wireless Device Point

12. Main messaging Unleash your video surveillance cameras with 802.11 Device Points from Axis! Make your move from wired to wireless surveillance!

13. Features and benefits  The 802.11b Wireless Device Point allows Axis network video products to integrate into new and existing WLAN infrastructures  Eliminates the need for network cabling within network video solutions—lowering both the cost and complexity of the installation  Mobility. Wireless capability enables easy relocation of complete surveillance/monitoring systems  Fully compatible with 802.11b Access Points from Axis

14. Features and benefits (cont.)  Supports 128-bit WEP encryption for reduced risk of unauthorized video access  Platform independent with no special driver software required  Dual antenna design ensures optimal RF performance  Range: 100m (los) with reduced bandwidth  Range: 30 m (los) with full bandwidth

15. Key Applications  All traditional camera video applications are applicable; the key feature of 802.11b Wireless Device Point is to remove the need of network cabling.  Public transportation – wireless capability enables surveillance in hard to reach spots  Building security – allows for surveillance in older buildings without the need for extensive rewiring of the building infrastructure.

16. Key Applications (cont)  Surveillance of shopping centers and malls – wireless capability enables surveillance in hard to reach spots  Marketing – Broadcasting, cameras can watch otherwise unreachable points of interests  Industrial process monitoring – wireless capability enables surveillance in hard to reach spots  Monitoring of events (as example trade shows, concerts etc.) - wireless capability enables easy reallocation of the complete system)

17. Bundles  The 802.11b Wireless DevicePoint will be bundled with the following products:  AXIS 2100 Network Camera  AXIS 2120 Network Camera  AXIS 2130/2130R Network PTZ Camera

18. EMEA Pricing Product Name List Price 802.11b Device Point169 € AXIS 2100 Wireless Bundle499 € AXIS 2120 Wireless Bundle1349 € AXIS 2130/2130R PTZ Wireless Bundle1845 €

19. US Pricing Product Name List Price 802.11b Device Point169 $ AXIS 2100 Wireless Bundle399 $ AXIS 2120 Wireless Bundle1049 $ AXIS 2130/2130R PTZ Wireless Bundle1799 $

20. Important  The product has a radio type approval to be sold in the following countries:  Austria, Belgium, Denmark, Finland, France, Germany, Ireland, Italy, Luxembourg, the Netherlands, Norway, Portugal, Spain, Sweden, Switzerland, USA and the United Kingdom.  It cannot be sold outside these countries for legal reasons.

21. 802.11b Wireless Access Point

22. Main messaging Unleash your video surveillance cameras and network printing with 802.11b Wireless Access Points from Axis! Make your move from wired to wireless networks

23. Features and benefits  Provides an easy and flexible approach towards developing a variety of wireless applications  Facilitates wireless network video installations that can be viewed from anywhere, and complete wireless printing solutions together with the AXIS 5900 Print Server  Fully compatible with 802.11b Device Points from Axis  Provides 128-bit WEP encryption, mac-address filtering and hidden accesspoint for added security  Dual antenna design ensures optimal RF performance

24. US Pricing Product Name List Price 802.11b Access Point169 $

25. EMEA Pricing Product Name List Price 802.11b Access Point169 €

26. Important  The product has a radio type approval to be sold in the following countries:  Austria, Belgium, Denmark, Finland, France, Germany, Ireland, Italy, Luxembourg, the Netherlands, Norway, Portugal, Spain, Sweden, Switzerland, USA and the United Kingdom.  It cannot be sold outside these countries for legal reasons.

27. Wireless LAN Technologies Overview

28.  Channel ─ The medium use for passing data in specific frequency, such as 2.4GHz.  BSS (Basic Service Set):  The conceptual area within which members of a basic service set may communicate  Infrastructure mode  ESS (Extended Service Set):  A set of one or more interconnected BSSs and integrated WLANs.  Infrastructure mode  IBSS (Independent BSS) ─ Ad-Hoc mode Authentication  Association  Wired Equivalent Privacy (WEP)  Wireless Distribution System (WDS)  The whole interconnected Wireless LAN, including the different cells, their respective Access Points and the Distribution System Network Definitions

29. Infrastructure-BSS  BSS/ESS uses infrastructure mode. Wired Network Access Point Client Basic Service Set – single cell

30. Infrastructure-ESS Wired Network Access Point Client Access Point Client

31. Ad-Hoc (IBSS)  IBSS uses Ad- Hoc mode

32. How to Join the Infrastructure Network Wired Network Access Point Client ID : SanDisk1 Channel 7 Open system w/o WEP Searching Auth. Assoc. Connected

33.  Synchronization  Searching target wireless networks  Active Scanning (STA probes a frame)  Passive Scanning (STA waits for a Beacon) – XI-815  The Authentication Process  To get authenticated from the target wireless network  The Association Process  A state where a client is allowed to pass data through an AP  Additional Authentication(802.1x)  Exchange the ID & Password with RADIUS server How to Join Infrastructure Network

34. Roaming

35. Inter-cell Roaming

36. The Unlicensed Radio Frequency Spectrum 5.15-5.35 5.725-5.825GHz IEEE 802.11a HiperLAN/2

37. Physical Layer 802.11a802.11g802.11b Standard Approved September 1999 Available Bandwidth 300MHz 83.5MHz Unlicensed Frequencies of Operation 5.15-5.35GHz 5.725-5.825GHz 2.4-2.4835GHz Number of Non- overlapping Channels 4(Indoor) 4(Indoor/Outdoor) 3(Indoor/Outdoor) Data Rate Per Channel 6,9,12,18,24,36,48,54 Mbps 1,2,5.5,11 6,9,12,18,22,24,33,36,48,54Mbps 1,2,5.5,11Mbps ModulationOFDM DSSS,OFDM PBCC(O),CCK-OFDM(O) DSSS CCK

38. Channel Plan – 802.11/11b/11g

39. 2.412 2.437 2.462 Non-overlapping channels Channel Spacing (5MHz)

40. 1 11 6 6 6 1 1 1 1 1 1 6 6 6 1 1 3 3 3 2 2 2 1 1 1 1 1 1 3 2 3 3 2 2  Channel Plan : {1,6,11} or {…}  Hidden notes interfere Co-Channel Interference

41.  Sources of interference in 2.4GHz band  Main Source: consumer microwave ovens – Spread Spectrum Receiver design allows narrowband interference – Rate reduction allows even more robust operation  Other radios – RFID tag ( radio frequency ID tag ) – Generally, various systems in the 2.4GHz and will interfere with each other  Bluetooth, IEEE802.11 and Home RF are currently imcompatible and will interfere  IEEE802.11 and Home RF interoperability is currently being evaluated by Home RF working group Robust for Interference

42. Security

43. Why Security is so important?  Privacy  Preventing Unauthorized Access  Information security (read only/fully authorized)  Preventing Attacks  Virus  Personal Security Policy  Networking Security Policy  Tunnel  Firewall

44. How to protect your network?  Use virus protection software  Use firewall  Set up personal and group firewall.  Do not open unknown email attachments  Do not run programs of unknown origin  Disable hidden filename extensions  Keep all applications (including your operating system) patched  Turn off your computer or disconnect from the network when not in use  Disable Java, JavaScript, and ActiveX if possible  Disable scripting features in email programs  Make regular backups of critical data  Make a boot disk in case your computer is damaged or compromised

45.  SSID (Wireless network name)  Authentication  MAC address Control  WEP-keys Security in the 802.11b

46. However…  Wireless Network Vulnerability  2.4GHz radio signal and unlicensed band  Broadcasting all the time  WEP Encryption has been broken by certain means, it is not secure any more.  Authentication process is not strong enough since WEP encryption has been defeated.

47. Recommendation 1  More secure with WEP on than with WEP off.  The wireless link between the AP and client is only one small part of a secure network.  Large companies should implement end-to-end security  VPN, RADIUS, IEEE 802.1x  Home and small business can take several measures to improve security until a solution is available

48. Recommendation 2  Turn WEP on and manage your WEP key by changing the default key  Changing the WEP key, daily to weekly.  Password protect drives and folders.  Change the default SSID (Wireless Network Name).  Use MAC address control.  Use a VPN system. Though it would require a VPN server, the VPN client is already included in many operating systems such as Windows 98 Second Edition, Windows 2000 and Windows XP.

49. 802.11b Access Point

50.  Solution  Atmel (Z-Com)  Power Supply - 5V  LAN Port  One 10Base RJ-45 LAN port – a cross Ethernet cable is included  Antenna Design  One Dipole and one PIFA Hardware Overview

51. PWRGreenPower enabled WLAN Green Flashing: Wireless LAN traffic activity LANGreen Off: No Ethernet traffic activity Flashing: Wired LAN traffic activity On: Connect to the Ethernet. Led Status Off: No Wireless LAN activity

52. Feature Highlights  AP Operation Modes  AP  Repeater  AP with Repeating  Configuration Management  Web-based and Windows-based configuration  SNMP MIBII support (monitoring)

53. AP with Repeating Wired Network AP with Repeating Wired Network The AP is capable of performing AP and Wireless Bridge function at the same time. Same channel is required for all bridges.

54. AP / Repeater only AP with Repeating Wired Network Repeater Bridge While using a wireless bridge in this configuration has the advantage of extending the link, it has the disadvantage of decreased throughput due to having to repeat all frames using the same half duplex radio. Same channel is required for all bridges. Bridge (repeater) Bridge (repeater)

55.  Standard: Wi-Fi Compliant (not certified) Wi-Fi Compliant (not certified)  Security  WEP encryption up to 128-bits  MAC Filtering (up to 128 wireless nodes)  Hidden Access Point Feature Highlights (Cont.)

56. What security means does 802.11b Access Point provide? (I)  WEP  40bit encryption  Alphanumeric: 5 characters  Hexadecimal: 10 hexadecimal digits  128bit encryption  Alphanumeric: 13 characters  Hexadecimal: 26 hexadecimal digits

57. What security means does 802.11b Access Point provide? (II)  MAC Access Control  Enable MAC access control  Click “Add” to enter MAC addresses  Click “Apply”  Only the client with the MAC address that is listed on the table is allowed to associate with the Access Point  At most 128 clients

58. What security means does 802.11b Access Point provide? (III)  Enable Security and select “Hide Access Point” to make AP invisible for AP browsing engaged by stations.  If stations get the correct SSID, stations still can connect to AP by assigning SSID manually.

59. 802.11b Access Point Management/Configuration

60. How to configure the 802.11b Access Point  Via Web-based utility  Via Windows-based utility

61. Windows-Based Utility Password: default By installing and using Wireless Access Point Utility in Any PC on the local network, you may then access and configure the Wireless Station Adapter Anywhere on the local network.

62. Windows-Based Utility - Info Shows the Current Information of the Wireless Station Adapter, including ESSID, AP name, Channel, Mode, SNMP, DHCP Client, IP address, subnetmask and default gateway.

63. Windows-Based Utility – Parameter Setup Configurable parameters includes ESSID, AP name, Channel, Mode, SNMP, DHCP Client, IP address subnetmask, default gateway and password.

64. Windows-Based Utility – Security To prevent unauthorized wireless stations from accessing data transmitted over the network, the Wireless LAN Micro Access Point offers security Options such as WEP, MAC Access Control as well as Hide AP Access.

65. Windows-Based Utility – WEP For 40-bit WEP  ASCII: 5 characters (case sensitive) ranging from “a-z”, “A-Z” and “0-9” (e.g. MyKey)  Hex: 10 hexadecimal digits in the range of “A-F”, “a-f” and “0-9” (e.g. 11AA22BB33)  Passphrase: click Generate to generate WEP keys automatically. For 128-bit WEP  ASCII: 13 characters (case sensitive) ranging from “a-z”, “A-Z” and “0-9” (e.g. MyKey12345678)  Hex: 26 hexadecimal digits in the range of “A-F”, “a-f” and “0-9” (e.g. 00112233445566778899AABBCC)  Passphrase : click Generate to generate WEP keys automatically.

66. Windows-Based Utility – MAC Access Control With the Access Control Table enabled, you can authorize wireless units to access the Access Point by identifying the MAC address of the wireless devices that are allowed access to transmit data.

67. Windows-Based Utility – Hide AP Access With hide AP access enabled by checking “Hide AP Access” check box, wireless stations with ESSID “ ANY ” will not browser and associate to the Wireless Micro Access Point.

68. Windows-Based Utility – About Shows the Current Utility and Firmware of the Wireless Access point

69. Windows-Based Utility – About With the Firmware Upgrade Utility, you will be able to upgrade any of the 802.11b Access Point on the network. Password : default

70. WEB-Based Utility – Login

71. WEB-Based Utility – Info

72. WEB-Based Utility – Configuration

73. WEB-Based Utility – WEP

74. WEB-Based Utility – Hide AP and MAC Access Control

75. WEB-Based Utility – TCP/IP

76. 802.11b Access Point FAQs

77. How to reset 802.11b Access Point to the default?  Software  Press the “Default” button of the utility.  Hardware  Press the “Default” button by the side of the LAN port on hardware

78. How to upgrade firmware  Firmware upgrade utility  Add *.bin file  Press “Upgrade” button.

79. How many Wireless Bridges can the 802.11b Access Point grant the connection with?  Software limit  At most 256 clients  Suggestion  No more than 4 clients  Cells around each repeater will overlap by a minimum of 50%

80. How to use the “AP with Repeating Mode”  From the “Mode” item on utility, select “AP+Repeater”.  The same channel is required to all Access Points.

81. How does SNMP work in 802.11b Access Point?  Enable SNMP.  Install a SNMP management tool to compile the 802.11 MIB files and use the tool or other tools to monitor the SNMP agent.

82. 802.11b Device Point

83. 802.11b Device point Hardware Overview  Solution  Atmel (Z-Com)  Power Supply - 5V  LAN Port  One 10Base RJ45 LAN port, a cross Ethernet cable is included  Antenna Design  One Dipole and one PIFA  Output Power 18dBm typical

84. PWR Green Power enabled WLAN Green Off: No Wireless LAN traffic activity Flashing: Wireless LAN traffic activity On: Associated to the Wireless AP. LAN Green Off: No Ethernet traffic activity Flashing: Wired LAN traffic activity On: Connect to the Ethernet. Hardware Overview (Cont.)

85. What security means does the 802.11b Device Point provide?  WEP  40bit encryption  Alphanumeric: 5 characters  Hexadecimal: 10 hexadecimal digits  128bit encryption  Alphanumeric: 13 characters  Hexadecimal: 26 hexadecimal digits  Passphrase  ASCII string

86. Act just like Wireless Station Access Point Wired Network Device Point Internet

87. Act just like Wireless Station Access Point Wired Network Device Point Multi-Client Support (will probably be available) Device Point Internet

88. How to configure the 802.11b Device Point?  Via Web-based utility  Via Windows-based utility

89. Windows-Based Utility Password: default By installing and using Station Adapter Utility in Any PC on the local network, you may then access and configure the 802.11b Device Point Anywhere on the local network.

90. Windows-Based Utility - Info Shows the Current Information of the Device point, including ESSID, AP name, TX rate, IP address, subnetmask and default gateway.

91. Windows-Based Utility – Parameter Setup Configurable parameters includes ESSID, AP name, TX rate, IP address subnetmask, default gateway and password.

92. Windows-Based Utility – Security To prevent unauthorized wireless stations from accessing data transmitted over the network, the 802.11b Device Point offers WEP security options.

93. Windows-Based Utility – Security For 40-bit WEP  ASCII: 5 characters (case sensitive) ranging from “a-z”, “A-Z” and “0-9” (e.g. MyKey)  Hex: 10 hexadecimal digits in the range of “A- F”, “a-f” and “0-9” (e.g. 11AA22BB33)  Passphrase: click Generate to generate WEP keys automatically. For 128-bit WEP  ASCII: 13 characters (case sensitive) ranging from “a-z”, “A-Z” and “0-9” (e.g. MyKey12345678)  Hex: 26 hexadecimal digits in the range of “A- F”, “a-f” and “0-9” (e.g. 00112233445566778899AABBCC)  Passphrase : click Generate to generate WEP keys automatically.

94. Windows-Based Utility – About Shows the Current Utility and Firmware of the 802.11b Device Point

95. Firmware Upgrade Utility Allow you to upgrade the firmware for the Device point. Password: default

96. WEB-Based Utility – Info

97. 802.11b Device Point FAQs

98. How to reset the 802.11b Device Point to the default?  Software  Press the “Default” button of the utility.  Hardware  Press the “Default” button by the side of the LAN port on hardware

99. How to upgrade firmware  Firmware upgrade utility  Add *.bin file  Press “Upgrade” button.

100. Does the 802.11b Device Point support Wireless Workgroup Bridge?  No, not today:  But it will probably support Wireless Ethernet Bridge (same as Wireless Workgroup Bridge) on the later version.  The number of Ethernet clients will be limited to under 8.

101. Demonstration/ Hands On Training

102. Questions