1. PRO-MIC Software Details

2. PRO-MIC Software Main Screen This is the main user interface screens. The database browse shows a listing of all stored profile measurements. The buttons at the window top provide user functions to add measurements to the database, view stored measurements and edit stored data, etc…

3. PRO-MIC Software Edit Screen Version 1 This is the operator’s data entry screen where the parameters for each measurement are stored. The target shape settings are also made in this screen including Requested Crown and Tolerance, among others. The Read PRO-MIC button is used to download data from the PRO-MIC Digital while the View Profile button is used to display the previously stored profile.

4. PRO-MIC Software Profile Display Version 1 This is the most common profile display and is typical for a wide range of industries. The measured profile is shown in blue, the ideal or target shape in green while the tolerance bands are drawn in magenta. A separate chart contains a deviation plot showing any errors in the roll shape.

5. PRO-MIC Software Edit Screen Version 2 This data entry form is popular with some industries including our paper industry customers.

6. PRO-MIC Software Profile Display Version 2 This chart presentation is popular with some industries including our paper industry customers.

7. PRO-MIC Software Edit Screen Version 3 This data entry form is popular with some calendering industries including our rubber and tire industry customers.

8. PRO-MIC Software Profile Display Version 3 This chart presentation is popular with some industries including our rubber and tire industry customers.

9. PRO-MIC Software Profile Comparison Screen This screen is used to select profile for comparison. For instance: before and after use in the mill; and hot vs. cold profiles.

10. PRO-MIC Software Profile Comparison Charts This is a sample roll comparison chart comparing before and after grinding (blue vs green) for a roll.

11. PRO-MIC Software Hardcopy Reports