1. www.microfusionlab.com TRAINING AND OPERATIONS PERFORMANCE SYSTEM (TOPS)

2. TOPS Training and Operation Performance System

3. TOPS- TRAINING OPERATOR PERFORMANCE SYSTEMS Dynamic Simulator for virtual operation experience of the plant without risking actual equipment. Up to date procedures for the safe and proper operation of the plant under different conditions. Training with procedures and guidelines with simulator at various transients. Performance evaluation.

4. TOPS- DESIGN TOPS Training Simulator – Designed to Familiarize operators with normal operating procedures. Educate operators to respond effectively during units upsets. Refresh senior operators knowledge. Evaluate and enhance operation performance.

5. TOPS- TRAINING SIMULATOR Dynamic Plant Model Detail Process Simulation TOPS Instructor Station Run Stop Freeze Resume Save Snapshots Restore Snapshots Training Scenarios Pre-programmed Testing Evaluation Link to operation procedures

6. TOPS- FUNCTIONS Pre-defined Training Scenarios Run/Re-Run Training Sessions Practice Test Sessions Testing and Grading Base on Critical Parameters Evaluation Reports Save Test Scenarios

7. THINK TM -TOPS ENHANCES OPERATIONAL AWARENESS TOPS trains operators to regularly scan critical parameters. Operational awareness of critical parameters is vital to minimize upsets and trips as well as controlling major system failures. Incorporate developed procedures on simulator training.

8. PERFORMANCE EVALUATION Operators can be evaluated on their response actions and times using TOPS testing scenarios. These grades can be on normal operations or on significant system upsets. Grades be trended and analyzed to determine the level of improvement over time.

9. THINK TM -TOPS OPERATOR TRAINING TRANSLATES TO SYSTEM RELIABILITY Q&A PP3 Increased exposure to procedures interactively on TOPS Simulator, and how they are to be followed can significantly reduce operator errors. Through various scenario trainings, the ability to spot issues that will affect the plant operation can be enhanced resulting in improved the overall system reliability. More experience in finding root causes of operation issues.

10. FROM SIMULATION TO ACTUALIZATION  Learn the systems and their interactions through hands on operation and with one another.  Practice the operation procedures on the simulator to develop operational expectations.  Training scenarios and testing base on critical parameters.  Acquire the experience to spot process problems early due to critical parameter deviations.

11. THINK TM Thermal Hydraulic Integrated Network

12. n Flexible Graphical User Interface n Equipment Library n Built-in Mass, Energy, and Momentum Simulation n Model Fidelity Varies with Needs n Drag & Drop Model Building n Re-configurable for Training, Checkout, or Process Design tank

13. THINK TM Advanced Numerical Method Advanced Solution Method: n First Principles n Modified Finite Element Method n Conservation of Mass, Energy and Momentum n Crash Proof Simulation Numerics n Two-Phase Flow n Subcooled Fluids / Superheated Vapor n Track and Separate Multiple Components *Level & desuperheater

14. THINK TM Steam Generation THINK Simulates The Full Range of H 2 O States: 3 Equation Two-Phase Flow Formulation Sub-cooled Liquid, Saturated Mixture & Superheated Steam Radiation / Convection / Conduction Heat Transfer to Tubes Full Boiling Curve

15. THINK90 Infi90 Emulator

16. THINK90 Emulation A New Approach to Infi90 Simulation  THINK90 Emulates Infi90 BRC Controllers  Executes Identical Configuration as the Actual Plant’s Infi90 DCS.  Its ICI emulation Exchanges Values with Infi90 Operator Consoles  Supports RS232 or SCSI communication  Support Infi90 PCV, PPA, PPB Consoles  No Additional Infi90 Hardware Required

17. CAPABILITIES Simulated all BRC Related Function Codes EWS or Composer Online Monitoring Number of CFG Files Only Limited by Memory Run Real Configuration without Modification

18. THINK Simulator Setup

19. Simulator Hardware Setup

20. Q & A

21. For further information and pricing please contact: C.A.R. Systems Ltd. 14 Gowan Road, RR # 3 Shanty Bay, Ontario. Canada. L0L-2L0 Phone: (705) 725-0653 Email: info@carsystemsltd.cominfo@carsystemsltd.com