1. 29 CFR (f)(4); or
29 CFR (f)(5)(v); or
29 CFR (a)(3)(i)
Portable electric equipment must be grounded (unless double insulated type).

2. 29 CFR 1910.303(g)(1) & 1910.303(b)(2) – Maintain ready access to panel & repair panel door.
29 CFR (b)(2) – Cover open junction box.
29 CFR (c)(1) – Do not block fire extinguisher.

3. 29 CFR (d)(1) & (e)(1)
Guard belt and pulleys.

4. 29 CFR 1910.151(c) – Provide immediate access to emergency eyewash; maybe need an emergency shower.
29 CFR (a)(1) – Maintain clean & orderly workspace.
More…

5. 29 CFR 1926.1053(b)(13) – construction
29 CFR (d)(2)(xii) – general industry
Top of stepladder must not be used as a step.

6. 29 CFR (c)(1)
Do not block fire extinguisher.

7. 29 CFR (c)(1)
Open-sided floor or platform 4 feet or more above adjacent floor or ground level must have guardrail except where there is entrance to a ramp, stairway, or fixed ladder.

8. 29 CFR 1926.405(b)(1) – construction
29 CFR (b)(1) – general industry
Conductors entering boxes, cabinets, or fittings shall be protected from abrasion, and openings through which conductors enter shall be effectively closed.

9. 29 CFR (g)(12)
Tools and other metallic objects shall be kept away from the top of uncovered batteries.

10. General Duty Clause
Employer must provide a safe surface from which to work.

11. 29 CFR (b)(4)(i)
Each employee on walking/working surfaces shall be protected from falling through holes more than 6 feet above lower levels…

12. 29 CFR 1910.106(e)(2)(iv) or 1910.106(e)(2)(ii) and
29 CFR (f)(5)
Containers must be closed and labeled…more…

13. 29 CFR 1910.1030(d)(4)(iii)(A)(3)(i)
Prevent protrusion of contaminated sharps.

14. 29 CFR (c)(1)
Stairways with four or more risers or higher than 30” must be equipped with a stair-rail system along each unprotected side or edge.

15. 29 CFR 1910.134(h)(1)-(4) & 1910.94(a)(5)(iv)
Abrasive blasting respirator must be cleaned, stored in a clean environment, inspected, and repaired.

16. 29 CFR (g)(1)(iii)
Flexible cord is not to be used as a substitute for fixed wiring.

17. 29 CFR (h)(1) & (h)(4)
Radial arm saw needs lower guard and saw blade needs to automatically return to the starting position when released.

18. 29 CFR (c)(1) and (l)(4)
Employee must be provided a safe work surface with guardrails; employee needs refresher forklift training.