1. First Person POV RC Car Using WiFi-Direct P2P video streaming and Bluetooth By Shane Langhans

3. Control Unit Supplies GUI to user 4-Tasks: 1.Read changes to Sensor.TYPE_GYROSCOPE 2.Scale/map/confine them to byte commands -90 < Throttle < 90 -90 < Steering Angle < 90 3.Send them to Mobile Unit via WiFi Direct 4.Display incoming Camera Preview frames from Mobile Unit

4. Control Unit continued Rotation Data is gathered using Sensor.TYPE_GYROSCOPE and integrated to track the current angles of rotation around the X and Y axes. Rotating around Y controls Throttle, while rotating around Z controls Steering angle. The sensor data is then scaled and mapped to one byte for each the Throttle level and Steering angle then confined to the limits shown below before being sent out via WiFi Direct to the Mobile Unit. -90<Throttle<90 -90<Steering<90

5. Mobile Unit Strapped to RC car 3 tasks: 1.Continuously stream Camera Preview frames out to Control Unit via WiFi Direct 2.Receive Throttle and Steering commands (1 byte each) from Control Unit via WiFi Direct 3.Relay those 2 bytes to the Arduino via Bluetooth Thread

6. Arduino 2 Tasks: – Receive Throttle and Steering commands from Mobile Unit via Bluetooth – Implement them as PWM signals to the Motor ESC and the Steering Servo on RC Car Arduino’s servo library gives 20ms period pulses with a 1-2ms pulse width. This will work to control both the ESC and the steering servo.

7. New Challenges Working with gyroscope data – Done. Surprisingly simple WiFi Direct – Establishing communication socket – Tx/Rx data (camera frames and control commands) Securely Fastening the Mobile Unit – Stable camera – It’s my phone and I don’t want the screen to crack

8. Previous Experience to Utilize Me: – Bluetooth communication socket between Android and Arduino – Arduino PWM controls – Camera Preview (hw #2) Others: – Found similar projects, but their results were disappointing ie, poor control interface led to poor driving performance