1. Measuring Performance

2. Computer Performance Measuring Computer Performance
Clock Speed
MIPS
FLOPS
Benchmark Tests
Factors Affecting Computer Performance
Processor Speed
Data Bus Width
Amount of Cache
Faster Interfaces
Amount of memory

3. 3 Computer Performance 3.2 Measuring Performance
When we measure performance we usually mean how fast the computer carries out instructions. The measure we use is MIPS, millions of instructions per second.
MIPS affected by
The clock speed of the processor
The speed of the buses
The speed of memory access.

4. 3 Computer Performance 3.2.1 The Clock
Every processor has a clock which ticks continuously at a regular rate.
Synchronises all the components.
Cycle time measured in GHz
200 MHz (megahertz) means the clock ticks 200,000,000 times a second (Pentium )
2.7 – 4+ GHz in 2010

5. 3 Computer Performance 3. 2 Measures of Processor Speed
Clock Speed
Generally the faster the clock speed the faster the processor – 3.2 GHz is faster than 933 MHz
Mips – Millions of Instructions per Second
Better comparison but beware of false claims e.g. only using the simplest & fastest instructions and different processor families.
Flops – Floating Point Operations per sec.
Best measure as FP operations are the same in every processor and provide best basis.
Benchmark Tests
Well defined standardised routines to test the performance of a computer.
Dhrystone – tests string and frequently used functions
Whetstone – test using arithmetic functions

6. 3 Computer Performance 3.3.1 Data Bus Width
A WORD is the number of bits a processor can handle in one operation.
If word size and data bus same size then data transfers carried out in single operation.
Width of data bus defines how much data can be carried in one fetch.
32 bit data bus (word length) carries twice as much data as a 16 bit bus and a 32 bit system should be faster.
Most modern processors use 32 bit but some (AMD) 64 bit.
Width of Address bus affects the amount of memory which can be accessed.

7. 3 Computer Performance 3.3.2 Peripherals & System Performance
Peripherals work at much slower speeds than the CPU.
Buffers and spooling can help.
Sound cards can have their own processor, RAM and ROM.
Video cards their own RAM (up to 1Gb)

8. 3 Computer Performance 3.3 Memory & System Performance
Speed of access & Word size
nanosecond but memory speed and word size dictated by motherboard and processor
Amount of memory
Adding memory (upgrade) usually improves system performance esp. graphics & multimedia.
Usually 2 slots on motherboard so max memory is 2 x largest modules (currently 4Gb affordable).
Cache (pronounced cash) memory
Cache exists between memory and processor
Very fast memory speeding data transfer in shorter fetch cycle.
Currently 2Mb Cache common

9. Now Answer the following questions in your jotter …..

10. 1. a) Explain what effect increasing the width of the address bus will have on system performance
b) Explain what effect increasing the width of the data bus will have on system performance
How many gigabytes of memory would a 40 bit address bus be able to address if the data bus length was :
8 bits
16 bits?

11. 3. a) What is meant by the CLOCK Rate of a processor?
b) What unit is used to measure clock rate?
4. a) Give 2 reasons why adding more main memory can improve system performance
b) Give 2 reasons why adding more cache memory can improve system performance

12. 5. Abdul has a 2. 5GHz PowerPC and Sarah has a 2. 7 GHz CompaqPC
5. Abdul has a 2.5GHz PowerPC and Sarah has a 2.7 GHz CompaqPC. Sarah says her computer is faster than Abdul’s because it has a higher clock rate.
Do you think this is true?
Describe a test that could be done to see if she is correct.