1. Institute Of Applied Technology ATE 1012 Grade 10 Eng. Rose Hasan

2.  Identify different hand tools used in workshops  Understand the basic functions and types of hand tools.  Be aware of workshop tools safety rules. Eng. Rose Hasan

3.  Introduction  Common Tools ▪ Screwdrivers ▪ Wire Strippers ▪ Side Cutters ▪ Wire Crimpers  Hand Tools Safety  Class and Lab Activities Eng. Rose Hasan

4. Hand tools applications

5.  Screwdrivers (Purpose): Eng. Rose Hasan insert and tighten screwsloosen and remove screws

6.  Screwdrivers (Types): identified by the shape of their head into different types. Eng. Rose Hasan

7.  Wire strippers (purpose): are small, hand- held devices used to strip the insulation from electric wires.

8.  Wire strippers (types): manual and automatic Eng. Rose Hasan

9.  Side Cutters (purpose): used for cutting extra components leads. Eng. Rose Hasan

10.  Strip wire with automatic stripper (vedio) Eng. Rose Hasan Activity 3: How to use wire strippers

11. Eng. Rose Hasan

12.  Wire Crimpers (Purpose): used to connect two wires or two conductors together. Eng. Rose Hasan

13.  Activity 4: How to use a wire crimper to crimp pins Eng. Rose Hasan

14.  Basic Rules for hand tools Safety:  To prevent accidents that are caused by hand tools, follow the coming tips: Eng. Rose Hasan

15.  To prevent accidents that are caused by hand tools, follow the coming tips: Eng. Rose Hasan

16.  Indicate the safe and unsafe behavior in the following pictures. Give Reasons Eng. Rose Hasan

17.  Fill in the table below: Eng. Rose Hasan

19.  Items Required: Eng. Rose Hasan

20.  Steps:  Hold the wire stripper in your hand  Put the wire that you want to remove the insulation from into the jaws of wire stripper up to the length you need  Squeeze the handle. The jaw will remove the wire insulation.  Once you finish squeezing the handle, release the handle and the jaw will open again then insulation of the wire is removed. Eng. Rose Hasan

21. I am used to remove a screw, who am I ? I am having the head symbol shown below, who am I ? Who am I? I am used to connect two conductors together, who am I? Who am I? I am having the head symbol shown below, who am I ? Who am I?I am used to cut extra electrical leads, who am I? 12 3 3 4 4 5 5 6 7 8 8 9

22.  Check your tools regularly for wear and damage  Use the correct tool for the job  Keep your tools clean and in a good conditions  Use appropriate safety equipments  Keep hands a way from the moving parts Eng. Rose Hasan

23.  Items Required: Eng. Rose Hasan

26. 1 2 3

27.  Place the cores into their correct positions as shown below Eng. Rose Hasan Core colorCore markingCore position BROWNLive (L)FUSE (RIGHT HAND PIN) BLUENeutral (N)LEFT HAND PIN GREEN/YELLOWEarth (E)EARTH PIN (TOP) 4

28. Eng. Rose Hasan 56 Video

29.  Do Exercise 2 and 3 in the Module. Eng. Rose Hasan

30.  Be prepared to a Quiz next Class in module #2.  Do Homewok1-Mod2 (in my wiki)  Next Class: Start with Module #3 Eng. Rose Hasan