Download presentation
Presentation is loading. Please wait.
Published byCuthbert Reeves Modified over 9 years ago
1
Dr. N. S. Harding Chemical Engineering 477 January 28-29, 2013
2
Major Report Sections Transmittal Letter Title Page Front Material (Table of Contents, List of Illustrations) Executive Summary Introduction (Objective) and Background Experimental Procedure/Methods Results and Discussion Conclusions and Recommendations Back Material (Acknowledgements, References, Appendix) Chem. Eng. 477 - 20132
3
Transmittal Letter LAST section written Date To Whom? Subject – Succinct description of project 1 paragraph on what was asked and how it was done 1 paragraph on conclusions and recommendations Signatures Chem. Eng. 477 - 20133
4
Title Page Descriptive title To Whom? From Whom? Date Chem. Eng. 477 - 20134
5
Front Material For these short (formal) reports it is optional If you include, then the Title Page is “i” Use roman numerals up to Executive Summary which would be “1” Chem. Eng. 477 - 20135
6
Executive Summary 2 nd to last section written 1 page maximum Use key bullet points (conclusions/recommendations) Summarizes: Objective, what was done How it was done What were the results What are the conclusions What are the recommendations IF figure/table, must have different number, e.g. ES1 Chem. Eng. 477 - 20136
7
Body of Report Use a header and footer; one of which has the page number. No smaller than 11 pt type Double-spaced; not less than 1.5 spacing Use headings and sub-headings Refer to figures/tables before showing Be consistent Chem. Eng. 477 - 20137
8
Paragraphs/Text Each paragraph organized around key sentence Key sentence should be 1 st or 2 nd sentence Rest of paragraph supports/discusses key sentence Key sentences can be used as outline for the report 3 rd person is preferred in technical writing Be consistent in verb tense usage Completed items in past tense Discussion/analyses/recommendations – present Almost nothing in future tense Chem. Eng. 477 - 20138
9
Figures Captions are below figure Label axes correctly with units Use common scales for multiple figures, sig. figs. Pay attention to symbols, colors, etc. Make the figures clear and clean Be consistent Chem. Eng. 477 - 20139
10
Tables Titles are above table Align columns Don’t forget units (column headings) Significant figures!!! “*” or call outs are directly beneath table Be consistent Chem. Eng. 477 - 201310
11
Equations (Reactions) Numbered consecutively on right side: (#) Identify all variables first time used Same size font as text or may go to 10 pt. Capital “E” when referring to specific equation Chem. Eng. 477 - 201311
12
Results/Discussion Section(s) Data analysis Good: Includes all results so one can duplicate or make a decision based on data Better: Summarizes data into figures/tables so one can quickly make a decision based on data Best: Synthesizes the data to show: In-depth analysis Significance of results Context and meaning Credible recommendation(s) Want reader to think, feel, or do something differently because they read the report! Chem. Eng. 477 - 201312
13
Back Material Acknowledgements (optional – should include MIKE!) References – required Appendix – required (Separate Subsections) Detailed derivations of theory Raw and reduced data Sample calculations Statistical analysis Other supporting documentation Note: Equations, figures, tables are numbered, A1, etc. Chem. Eng. 477 - 201313
14
Bottom Line From your report, the reader should know who, what, when, where, why and how and be able to completely duplicate your experiment and get essentially your results and conclusions within your calculated confidence level!! Note: There is no good writing, only good re-writing! Suggestion: Finish the report and sleep on it – then next day review one last time. QUESTIONS? Chem. Eng. 477 - 201314
Similar presentations
© 2025 SlidePlayer.com. Inc.
All rights reserved.