1. Lubrication Systems Chapter 12 Page 143

2. Oil and It’s Route

3. Lack of Oil Damage

4. Oil’s Function

5. Engine Sump

6. Viscosity

7. Oil Additives

8. What’s the Numbers About? SAE 10W-30 SAE 10W-30 SAE= Society of Engineers SAE= Society of Engineers 10= Viscosity measured at 0 degrees 10= Viscosity measured at 0 degrees W= Winter grade oil W= Winter grade oil 30= viscosity measured at 212 degrees 30= viscosity measured at 212 degrees

9. API Rating API=American Petroleum Institute API=American Petroleum Institute Rating progress from SA through SJ (s=spark ignition) Rating progress from SA through SJ (s=spark ignition) Diesel engines are rated with a “C” (compression) designation Diesel engines are rated with a “C” (compression) designation These designations tell us what additive level is in the oil-Government regulated-2004= SJ or CF is mandatory. These designations tell us what additive level is in the oil-Government regulated-2004= SJ or CF is mandatory. Changing brand names of oil will not make a difference, As long as the API numbers are the same. Changing brand names of oil will not make a difference, As long as the API numbers are the same.

10. The Oil/Temp Usage Chart

11. Changing Oil

12. Changing Oil (Drain)

13. Changing Oil (Filter)

14. Changing Oil (Filling)

15. Changing Oil (Level Check)

16. Oil Filter Inside Element Lube the Seal

17. Important Information Make sure you have the right filter before the job Make sure you have the right filter before the job Oil can be hot when draining Oil can be hot when draining Check condition of draining oil, feel, smell, etc. Check condition of draining oil, feel, smell, etc. Check plug gasket Check plug gasket Make sure oil filter gasket comes off with filter Make sure oil filter gasket comes off with filter Clean up any spills Clean up any spills Replace plug Replace plug Lube filter seal Lube filter seal Spin on filter until it stops then an additional ¾ to 1 turn Spin on filter until it stops then an additional ¾ to 1 turn Fill engine, start, verify oil pressure, shut down, check for leaks Fill engine, start, verify oil pressure, shut down, check for leaks Finish up job, clean area, oil sticker, etc. Finish up job, clean area, oil sticker, etc.

18. Checking Transaxle and Differential Fluid

20. Your Job. Complete questions 1-10(review) and ASE style questions 1-10. Page 152-153. Complete questions 1-10(review) and ASE style questions 1-10. Page 152-153. Write on a separate paper and write out the complete question and your answer. ( do not write the other answer options). Write on a separate paper and write out the complete question and your answer. ( do not write the other answer options). Complete the chapter worksheet (I will give it out). You may write on it. Complete the chapter worksheet (I will give it out). You may write on it. File both items in your note book. File both items in your note book. Notebooks will be graded in the future. Notebooks will be graded in the future.