1. LG Hotel Mode Operation Description (MTV)

2. Screen No.LG Hotel Mode LG Hotel Mode (V2.0) Hotel Mode Operation No Power On Status STD Station Menu Display Yes Program Change Yes Input Source Change Yes Menu Display Yes OSD Display Yes LG IR Operation Yes Local Key Operation Yes Max Volume 100 Power On Default No Program Off Volume Off A/V Setting Yes Radio Video Blank Yes Start PR. No. 10 No. of PR. 3 This applied Hotel Mode is named “LG Hotel Mode” and The Version of the used Hotel Mode is indicated together. The point different with the existing Hotel Mode is 1.Make in order to be able to establish the below item only when click ‘Yes’ by laying Hotel mode Operation in the first part 2. Add an item of Power On Status 3. Add an item of Menu Display 4. Extend a function of OSD Display 5. Leave out Fix Volume 6. Add an item of A/V Setting in Power On Operation Mode 7. Leave out Auto Off Operation (move to Service Menu) 8. Add a function of Radio Video Blank Painting of screen

3. Minute specification of Hotel Mode by item 1. Hotel Mode Operation - Configure whether or not make all functions of Hotel Mode operate. - Able to configure by Yes (operation) and No (No operation). - All functions of Hotel mode is applied at the time of establishing by Yes/ all function of Hotel mode is not applied at the time of establishing by No - Cannot select the below item at the time of establishing by No. - Don’t operate for tuning and must keep the present program if program to tune is Skip when operate for tuning by Numeric Key, when is established by Yes. 2. Power On Status : - Select whether operate a set in any state when Main power is On. - Configure to PWR, STD and LST. - Make A set On unconditionally when main power is On in PWR. - Keep in the state of Stand-by when main power is On in STD. - Make a set operate in the state of the former power when main power is On in LST. In the same concept with Power Backup mode, make a set operate in the state of On when main power is Off in the state of Power On, and make a set operate in the state of Stand-by when main power is Off in the state of Stand-by. 3. Station Menu Display : - A function which permits or prohibits the entry of Station Menu in OSD. - Configure by Yes (possibility of entry) or No (Impossibility of entry). - Can configure by entering a Station menu in main OSD at the time of Yes, but cannot enter a station menu at the time of No. Screen No.LG Hotel Mode Painting of screen

4. 4. Program Change : - A function which permits or prohibits conversion of channel at the time of TV Source. - Configure by Yes (Possibility of conversion) or No (Impossibility of conversion). - A channel key, a figure key, a list key and a Q. View key don’t operate (Impossibility of conversion), and cannot enter a Station menu in main OSD, at the time of selecting No. - A channel key, a figure key, a list key and a Q. View key operate, and can enter a Station menu at the time of selecting Yes. - PR. Item is fixed to the present PR. in the menu of On Time at the time of configuring No. 5. Input Source Change : - A function which permits or prohibits the conversion of input Source. - Configure by YES (Possibility of conversion) or NO (Impossibility of conversion). - Don’t permit the operation of the keys and the entry of menu besides TV mode so that input of a channel key, a figure key, a list key in the input source besides TV at the time of No (Impossibility of conversion) and a Q. View key and a function which converts to TV mode at the time of entering a Station menu in main OSD may not operate. Only, operation of Auto AV is possible. - All operate at the time of selecting Yes (possibility of conversion). - Only volume information is turned on in input source configured irrespective of PR. Information configured in On Time at the time of configuring by No. 6. Menu Display : - A function which configures whether or not operate a remote control or a menu of a local key. - Configure by YES (Operation) or NO (No operation). - A mode which pushes for 5 seconds a menu to enter Installation menu must be operated though select NO (No operation). - A Menu operates at the time of selecting Yes (Operation). Screen No.LG Hotel Mode Painting of screen

5. 7. OSD Display : - Decide the indication of OSD. - Configure by Yes (Indication) or No (No indication). - All OSD don’t indicate at the time of configuring by No (No indication). Extend from the part which indicated only the existing Channel OSD to all OSD. 8. LG IR Operation : - Decide the operation of LG remote control. - Configure by Yes (Operation) or No (No operation). - All keys except keys (In-start key and In-stop key) related with Line SVC don’t operate at the time of configuring by No (No operation). - Can operate in the service mode even at the time of configuring by No. - The key for operation for a Menu key and input of password to enter Installation Menu makes in order to be operated even at the time of configuring by No. - All keys can operate at the time of configuring by Yes (Operation). 9. Local Key Operation : - Decide the operation of local key. - Configure by Yes (Operation) or No (No operation). - All keys don’t operate at the time of configuring by No (No operation). Operation is possible in the service mode. - All keys can operate at the time of configuring by Yes (Operation). - Only remote control power key operates exceptionally when all operation items of Local key and remote control are configured by No. Screen No.LG Hotel Mode Painting of screen

6. 10. Max Volume : - Configure the maximum value at the time of variableness of volume. - Scope of variableness: 0 ~ 100. - At the time of configuring the Max Volume, only volume value configured when push the key of Volume Up is variable. - At the time of configuring the item of the Max Volume, an item of volume goes up only to the max volume value in the menu of On Time. 11. Power On Default : - At the time of AC power On and power On in the Stand-by, configure a channel to display and volume level. - Configure by Yes (Operation) or No (No operation). - At the time of configuring by No, don’t apply to items of lower Program, Volume and A/V Setting. - At the time of configuring by Yes, can configure by entering a lower menu. 11-1. Program: - At the time of power On, configure whether turn on the configured program or Last memory program. - If configure to Off, at the time of power Off, be turned on to Last Input, and be turned on to Last program when Last Input is RF. - Made in order to select Program Number immediately besides Off without separate operation of On, and convert from Off to 0 next to Max Program. - Give priority to Program value when all Programs and ON TIME are configured and value is different. Screen No.LG Hotel Mode Painting of screen

7. 11-2. Volume : - At the time of power On, configure whether or not apply a Volume level. - Configure by Off (No operation) or Volume value to be applied (0 ~ 100). - Give priority to a Volume level value when all Volumes and ON TIME are configured and value is different. 11-3. A/V Setting : - Configure by Yes (Operation) or No (No operation). - Parameter values which configure before entering Installation Menu are applied at every time of Power On if change from No to Yes. - The configured Parameter value is PSM mode and Picture Data (Contrast, Brightness, Color, Sharpness, Tint) of the Picture side, SSM mode, Sound Data (Balance, Equalizer Data) and AVL of the Sound side, and OSD Language, Teletext Language and ARC Data apply basically, and whether or not application of Parameter besides these can differ in every sets. 12. Radio Video Blank : - Configure by Yes (Operation) or No (No operation). - Configure whether or not set up Video Blank for a program which has only Sound configured by Radio Program. - At the time of configuring by Yes (Operation), operate Video Blank for Radio Program. - Don’t operate Video Blank if there is a Video signal though it is configured by Yes (Operation). Operate Video Blank only when there is no Video signal in consideration of a case which indicate the background and broadcast only Radio. - At the time of configuring by No (No operation), don’t operate Video Blank though it is a Radio Program. Screen No.LG Hotel Mode Painting of screen

8. 12-1. Start PR. No. : - An item which configures the opening program of Radio Program. - A program which can configure is 0 ~ 99 (For china 0 ~ 199). 12-2. No. of PR. : - Configure the number of program to configure by Radio Program. - The max program which can configure is 10 units. - Cannot configure beyond the Max program. Namely, the number of program cannot configure beyond 5 units if Start PR. Is configured by 95. - Radio Program must exist continuously in the opening program. Screen No.LG Hotel Mode Painting of screen