Download presentation
Presentation is loading. Please wait.
Published byBruce Erik Stewart Modified over 9 years ago
1
GDC Workshop Session 2 - DVR System 2003/11
2
Agenda DVR Product Overview (5 min) DVR Hardware Installation (30 min) System Major Functions Setup (50 min) Disassembly (20 min) Troubleshooting (10 min) Q & A
3
DVR Product Overview Team Members -James, Toby, Jam, Ralph, Sharon IEI DVR Series Product Line -VioGate-100/120, VioCard-100 Workshop Environment Introduction -Network DVR System
4
Workshop Introduction Network DVR System
5
DVR Hardware Installation
6
Install PTZ Camera Connector Install Emergency Button Input 1 Ground 1 Input 2 Ground 2 Input 3 Ground 3 Input 4 Ground 4 Input Connector POWER Ground DC 0.5~24V GroundInput NCNOCOM VioGate GPI Sensor
7
DVR Software Installation Use VioGate Finder to Search VioGate Support several types of network setting DHCP, Static IP, Broadband PPPoE Protocol Quick configuration Only 9 Steps, Easy to Setup
8
System Major Functions Setup User Management Basic/advance settings Monitoring, Playback, PTZ Camera Control, User Authority PTZ Camera Protocol Setting Recording Setting Continuous, Schedule Recording Primary/secondary storage Snapshot Setting Event Handling Motion detection-area setting, sensitivity, detection mode
9
System Major Functions Setup The warning system demo Motion detection trigger GPO Emergency button trigger GPO VioGate Master Software demo PTZ Camera Pre-Set Function Alarm Handling + E-map
10
Disassembly VioGate 100/120 Open top cover Capture card and GPIO daughter board Front fan Flash disk - IFM-401-16 RS-422/485 connector Main board - SBC Backplane Remove drive tray Remove power supply
11
Troubleshooting
12
Q & A
Similar presentations
© 2025 SlidePlayer.com. Inc.
All rights reserved.