1. Traditional Fluorescent Lamp with Electromagnetic Ballast vs “adapT5” T5 Electronic Ballast adapter Fluorescent Lamp with Electromagnetic Ballast T5 Fluorescent Tube with “adapT5” T5 Electronic Ballast adapter Power Consumption Waste energySaving energy - High power consumption - Low in lumen - Save up to 50% of energy - Higher lumen Efficiency LowHigh - Low power factor (p.f.>0.45)- High power factor (p.f.>0.98) Replacement Electronic ballast “adapT5” T5 EB adapter - Long installation time - High installation cost - For replacement of high efficiency T5 FL fixtures, wiring and complete set of lighting fixture should be replaced. - With “Plug & Save” concept, installation time is short (approx. 30 seconds) - No wiring work and no qualified person required for replacement - No need to replace the original lighting fixture Flickering and Noise SeriousNo - Visible flicker causes damage to our eyes - With annoying noise - No flicker (over 35000 H z) lets eye protection - Silent operation Quality of Light WorseBetter - Lower lux level - Lower rendering index (R a >65) causes sight images far away from actual colours - Lower lumen - Higher lux level ( lux level 10% more) - Higher rendering index (R a >80) causes sight images close to natural colours - Higher lumen

2. Temperature MoreLess - More heat generated by electromagnetic ballast - More energy consumes on air-conditioning - Less heat generated by “AdpaT5” T5 EB adapter - Less energy consumes on air-conditioning Life Span of Fluorescent Lamp ShorterLonger - Higher starting and inrush current influenced by electrical fluctuation - Extremely low starting and inrush current due to less influenced by electrical fluctuation Environmental Protection Non environmental friendlyEnvironmental friendly - Waste energy causes more carbon dioxide (CO 2 ) generated - More materials used and need higher mercury content on manufacturing traditional fluorescent tube - Save up to 50% of energy then less carbon dioxide (CO 2 ) generated - Less materials used and lower mercury content on manufacturing T5 fluorescent tube Investment CostlyEconomical - High installation cost - For using T5, needs investment of new T5 fluorescent fixtures - No wiring work and no qualified person required for replacement - No need to replace the original lighting fixture Investment Return Long in payback periodShort in payback period - Waste energy and high in electricity charges - High in kVA charges due to low power factor (p.f.>0.45) - Save up to 50% of energy and then low in electricity charges - Save over 50% of kVA charges to high power factor (p.f.>0.98)

3. Model no.Length (feet) Operating Power Input Voltage Input Frequency Input Current Power Factor T.H.D.T.H.D.Ambient Temperature Life Span AEB14W214W220-240V50/60 Hz65 mA> 0.98<10-15 – 50 o C> 30,000 hrs AEB21W321W220-240V50/60 Hz95 MA> 0.98<10-15 – 50 o C> 30,000 hrs AEB28W428W220-240V50/60 Hz125 mA> 0.98<10-15 – 50 o C> 30,000 hrs AEB35W535W220-240V50/60 Hz155 mA> 0.98<10-15 – 50 o C> 30,000 hrs AEB35W642W220-240V50/60 Hz185 mA> 0.98<10-15 – 50 o C> 30,000 hrs AEB35W856W220-240V50/60 Hz205 mA> 0.98<10-15 – 50 o C> 30,000 hrs Specifications of adapT5 Electronic Ballast adaptor : Specifications of adapT5 Fluorescent Tube: Model no.Length (mm) Tube Diameter (mm) Rated Wattage (W) Lumen (lm) Color Temperature (K) Shade of White Color Rendering (Ra) Life Span (hours) Base AFT14W/827 AFT14W/840 AFT14W/865 5491614 1270 1240 1100 2700 4000 6500 Warm White Cool White Day-light 828000 G5 AFT21W/827 AFT21W/840 AFT21W/865 8491621 2150 2100 1850 2700 4000 6500 Warm White Cool White Day-light 828000 ATF28W/827 AFT28W/840 AFT28W/865 11491628 2760 2700 2550 2700 4000 6500 Warm White Cool White Day-light 828000 AFT35W/827 AFT35W/840 AFT35W/865 14491635 3500 3400 3300 2700 4000 6500 Warm White Cool White Day-light 829000

4. Key Benefits & Features of “adapT5” T5 EB adapter:- The key benefits of “adapT5” are Energy savings up to 73% Higher power factor, p.f.>0.98 Increased lamp life Instant startup without flickering Quiet operation No visible flicker during operation (Operation Frequency > 20kHz) Enhance sight vision closer to actual natural colours (Ra > 80) Lower total harmonic distortion (THD<10) Easy to install, no wiring works and no need to renew the fittings. Comply with standard T8, T10 and T12 fixtures Reversible retrofit Short payback period