1. P1P1 Application Since SP-030 has illumination capabilities, its applications are more varied It is more suited for installation at wharfs, on top of concrete bollards, and anywhere where lighting is necessary, but wiring is an issue.

2. P2P2

3. P3P3 Operation METEOR Bollards will operate at least 12 hours per day and require at least 6 hours of direct sunlight recharge. Under extreme weather conditions, METEOR Bollards can operate for up to 3-4 days without recharging. With an average 5-6 year lifespan (up to 10 years in the lab), the Li-Fe battery can be replaced easily during maintenance. For SP-010, 4 hour charging can last for 12 hour illumination., and fully charged Last 6 rainy days

5. P5P5 Installation Installing wired lights often cost the same, if not more, than the lights themselves. Meteor solves this time consuming and costly installation process with it s no-wiring design.

6. P6P6 Ultracapacitor & Battery Hybrid Battery For our new bollards, we incorporate Li-Fe batteries which are not only more efficient but with higher capacity SANYO eneloop batteries SANYO eneloop batteries are the first to combine the environmental and cost saving benefits of rechargeable batteries Ultracapacitor Ultracapacitors were previously featured in our paver and ground lights due to their long lifespan. Battery Solution

7. P7P7 Power Management With precise power management capabilities, Meteor will equip future bollard designs with microcontrollers (MCU) to serve performance-critical roles. MCUs are also ideal for –Increasing efficiency of solar power –Increasing LED illumination efficiency –Extending battery life

9. LED Light Distribution Control LED Chip Meteor customized lens LED base Meteor controls LED beam spread using the following methods: 1. LED base- reflective angle control 2. Customized lens design LED base reflective angle

10. Before and After First version Final version P Lumen : 9 lm Luminance: 12 lux (average) Lumen : 16.5 lm Luminance: 21 lux (average)

11. P11 Finish Fluoropolymer coating is widely used in building exteriors, steel structures, aluminum surfaces, petrochemicals pipelines and vessels. Excellent long lasting performance, 10-20 years. Available in Dark Bronze, Black and Platinum Silver

12. P Comparison of Batteries Lead-AcidNi-CdNi-MHLi-CoLiFeP04 eneloop batteries Energy Density(Wh/Kg)30578016711295 Cycle life400500 >500>2000>1500 Working Life(Yr)12225.54 Energy Efficiency (%)607570909580 Self-discharging (%)203035108 SafetyAverageGood WorstGood High Temperature Limitation 140 F167 F 149 F167F Green ProductNo Yes

13. P13 Applications Meteor's solar solution enables bollard lights to be installed and used in off grid areas where marking walkways is important but impractical or inconvenient using normal installation methods. Campuses Driveways Walkways Streetscapes Gardens Landscaping Plazas Entrances Malls Sidewalks Courtyards Building facades

14. P14 New Products Solar Illuminating Bollard Series - Designed for effective lighting of pathways, driveways, etc. Features: - High-power LEDs provide a wide asymmetric distribution - No light above ninety degrees horizontal - Bollard housing and shaft are single- piece aluminum finished in fluoropolymer coating

15. P15 Meteor' s Design Roadmap Solar Paver/Ground LightSolar LED Bollard /Post LightSolar Site / Area Light

19. P19 Japan

20. P20 Japan

21. SH-110 & SH-140 Solar Paver Lights “without” Solar Panels June 2011

29. P29 Rimmer Consulting Group 21438 N 38 th Place Phoenix, AZ 85050 Phone/Fax 480-629-8894 www.rimmerlighting.com Thank you for your attention.