1. Cisco Confidential © 2010 Cisco and/or its affiliates. All rights reserved. 1 MSE MSAP Functional Specifications Presenter Name: Patrick Nicholson

2. © 2010 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 2 Feature Overview Configuration and Support Viewing Configuration and Status Reference Materials

3. Cisco Confidential © 2010 Cisco and/or its affiliates. All rights reserved. 3 Feature Overview

4. © 2010 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 4 Mobile devices can retrieve service advertisements from over a Wi-Fi infrastructure using the Mobility Services Advertisement Protocol. The MSE now has the ability to provide MSAP server functionality for an MSAP service. MSAP facilitates mobile devices to discover network based services available in a local network or through service providers. MSAP provides service advertisements that describe available services to the mobile devices. Once the mobile device receives the service advertisement, it displays an icon on its user interface. The user can then click on the icon and launch the advertised service.

5. © 2010 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 5 NCS configures the Access Points to advertise Venue Name and MSAP capability in broadcast beacons. NCS also configures the MSE MSAP Service Engine. Mobile devices use the beacons to identify the MSAP capable Wi-Fi networks and connect to MSAP Server to retrieve the service advertisements. Typical Mobile devices are iPhone or Android based phone, Netbook, or a Tablet. Single Venue Deployment Example

6. © 2010 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 6 Manual Setup: 1.Power on or unlock phone. 2.Select Wi-Fi network from pop-up (but has vulnerability to access Rogue AP). 3.Go to WebAuth. 4.Browse web page and put in right credentials, usually ID/PWD. 5.Choose roaming plan. 6.Start Internet. Automatic Setup: 1.Power on or unlock phone. 2.Handset automatically validates the network and initiates the connection. Can you tell me your network information? Before I associate? Regular Client (Today) HotSpot 2.0 Client Venue Name Domain Name NAI Realm / Authentication Info HS 2.0 Info Yes! Here it is: Realm Name = cisco.com Auth Type = EAP-SIM Yes! Here it is: Realm Name = cisco.com Auth Type = EAP-SIM Enables device to automatically figure out whether HotSpot provides Internet access. Enables device to automatically provide the authentication credentials required by HotSpot. Faster network discovery and selection. Makes Wi-Fi easy to use and secure like 3G Cellular.

7. © 2010 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 7 A New Mobile Experience for Mobile Subscribers Receive transient applications without user intervention Special offers today Secure Wi-Fi Network Discovery

8. © 2010 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 8 The MSAP license is based on the number of service advertisements supported by the MSE. There are two types of MSAP licenses 1.Evaluation license 2.Permanent license. The evaluation license is valid for 60 days. The permanent license is based on the MSE platform and the number of service advertisements supported.

9. Cisco Confidential © 2010 Cisco and/or its affiliates. All rights reserved. 9 Configuration and Support

10. © 2010 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 10 STEP 1 - Choose Administration > License Center. STEP 2 - Choose Files > MSE Files from the left sidebar menu. The License Center page appears. STEP 3 - Click the Add to select the license file. STEP 4 - Click OK to add the license. The MSAP license is added.

11. © 2010 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 11 STEP 1 - Choose Services > MSAP. STEP 2 - From the Select a command drop-down list, choose Add Service Advertisements, and click Go. The Service Advertisement Details page appears

12. © 2010 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 12 STEP 3 - Enter the service provider name in the Provider Name text box for the provider who wants to send advertisements to client devices. STEP 4 - Select an icon that is associated with the service provider by clicking Choose File. This is the icon that is displayed on the client handset.

13. © 2010 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 13 STEP 5 - Click Add Venue to specify at which venues you want the advertisements to be broadcasted on. The Add/Edit Venue page appears.

14. © 2010 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 14 STEP 6 - Enter the venue name in the Venue Name text box. STEP 7 - From the Area Type drop-down list, choose the area type where you want to display the service advertisements. STEP 8 - From the Campus drop-down list, choose the campus type where you want to display the service advertisements. STEP 9 - From the Building drop-down list, choose the building name where you want the advertisements to appear.

15. © 2010 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 15 STEP 10 - From the Floor drop-down list, choose the floor type. STEP 11 - From the SSID drop-down list, choose SSIDs on which you want to broadcast the service. STEP 12 - Select the Display Rule radio button. You can select either the Display everywhere or Display near selected APs radio button. By default, the Display everywhere is selected. STEP 13 – Click Save.

16. © 2010 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 16 If you select the Display everywhere, then it searches for all the MSAP supported controllers that provide SSIDs and assigns these controllers to the MSE. If you select the Display near selected APs radio button, then you can configure the following parameters: 1.AP—Select those APs on which you want the advertisements to broadcast. 2.Radio—Select the radio frequency on which you want the advertisements to be broadcasted on. 3.Min RSSI—Enter a value for RSSI at which you want the service advertisements to display on the user interface.

17. © 2010 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 17 STEP 14 - Click Add Advertisement. The Add/Edit Advertisement page appears. STEP 15 - From the Advertisement Type drop-down list, choose the type of advertisement you want to display. STEP 16 - Enter the name that you want to display on the handset in the Friendly Name text box. STEP 17 - Enter the service description in the Friendly Description text box. STEP 18 - Enter the Service URL for each type of handset. The URL identifies the location at which the service can be retrieved. STEP 19 - Click Save. This information is applied to the MSE and the synchronization happens automatically.

18. © 2010 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 18 STEP 1 - Choose Services > MSAP. STEP 2 - Select the check box of the service advertisement that you to apply to a venue. STEP 3 – Click Apply to Venues. The Add/Edit Venue configuration box appears. Follow steps 6 to 13 to add an additional venue.

19. Cisco Confidential © 2010 Cisco and/or its affiliates. All rights reserved. 19 Viewing Configuration and Status

20. © 2010 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 20 STEP 1 - Choose Services > Mobility Services Engine. STEP 2 - Click MSE Device Name to view its properties. The General Properties page appears. STEP 3 - Choose MSAP Service > Advertisements from the left sidebar menu. STEP 4 – Click on the Provider Name.

21. © 2010 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 21 From here the Service Advertisement Details are displayed.

22. © 2010 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 22 STEP 1 - Choose Services > Mobility Services Engine. STEP 2 - Click MSE Device Name to view its properties. The General Properties page appears. STEP 3 - Choose MSAP Service > Statistics from the left sidebar menu.

23. © 2010 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 23 STEP 1 - Choose Services > Synchronize Services. STEP 2 - Choose Service Advertisements from the left side menu bar. The following information appears in the Service Advertisements page

24. © 2010 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 24 You can create the following MSAP reports: 1.Mobile MAC Statistics 2.Service URI Statistics

25. Cisco Confidential © 2010 Cisco and/or its affiliates. All rights reserved. 25 Reference Materials

26. © 2010 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 26 Mailing Lists @cisco.com Cisco User Guides NCS 1.1 Beta Guide MSE CAS Configuration Guide MSE wIPS Configuration Guide