1. 1

2.  100% Servo-Electric Motion Control  Three independent drives  Quick Change Tool load/unload  Advanced Controls  Lean cell Friendly  Rigid Construction Horizontal Servo Hotplate Welder Feature Summary 2

3. Standard Models HHAL2040S3-HP10 HHAL2040S3-HP3 HHAH2040S3-HP10 HHAH2040S3-HP3 HHAL2040S2-HP10 HHAL2040S2-HP3 Horizontal, Hot Plate, Advanced Controls, Low Temperature, 20”D x 40”W, Servo, 3 drives, Horse Power 10 3

4. The Servo systems twin motion (upper and Lower) tool mounting platens allow independent control of collapse/absolute distance, & speed on each part half, both against the heat platen and against each other in weld phase, Typical hard-stops can be removed “Near” Melt allows soft touch contact with heater platen, reducing wear on platen. “Near “ Join allows soft touch collapse during join sequence, reducing flash, improves cosmetic appearance. Programmable minimum open distance (Clearance) and lightning quick removal speed of the heat platen there by reducing 'open time' substantially over conventional style welders. Horizontal Servo Hotplate Welder Three Independent Control Servo Motion 4

5. Horizontal Servo Hotplate Welder User intuitive teach mode 5

6. Horizontal Servo Hotplate Welder Quick Change Rear Tool load 6

7. Horizontal Servo Hotplate Welder View movie 7

8. Horizontal Servo Hotplate Welder User sequence tutorial Quick Change Rear Tool load 8

9. Siemens Control System. 10” industrial color touch screen HMI, 3000 series Siemens PLC, Siemens Servo Drives. 9

10. ( 12) Independent heater controls ensures even heating and precise temperature control. Heater burnout alarms Alarm limits Run away heater control alarm 10

11. 15 Programmable setups 15 Nameable Tool ID Sets 11

12. 12

13. Detail indicator screen, allows for quick troubleshooting 13

14. Top View 14

15. 15

16. Pneumatic Counter Balance system for upper and Lower platens to lower servo power consumption. (Green) 16

17. Pneumatic large access sliding door with opto touch single activation switch and light curtains. 17

18.  Weight:Approx 5000 lbs  Overall Dimensions 75”D x 57”W x 110” T (190mm x 145mm x 279mm)  Maximum Part Size25.5”W x 17”D  Heat Platen Carriage Stroke24”  Tool Mount Platens20” D x 40” W (508mm x 1026mm)  Daylight38.6”  Front Door Opening52”W x 33.6” T  Depth Adjustment0.001” (0.025mm)  Maximum Clamp force2250 lbs (1520 continuous)  Axis SpeedsTool 10”per sec. Heat Platen 18” per sec Peak.  Temperature Zones 12 Digital Control via PLC w/ Heater Burnout Alarm  Thermal Temp Range100 F - 1000 F (Application dependent)  Warranty 2 years (parts and Service)  Electrical requirements240VAC, 100 amps. 3PH, 50/60 Hz  Pneumatic Requirements 80 PSI, 0.5 ID (5.4 Bar, 13mm ID) 18

19. 19 Proudly Developed and Manufactured by Dukane at Worldwide Corporate Headquarters St. Charles, IL USA

20. 20