1. http://www.eunil.com World Wide Leader PCB HANDLING EQUIPMENT EUNIL Co., Ltd. Everyday is a good day ( 株 ) 誾日

2. http://www.eunil.com World Wide Leader PCB HANDLING EQUIPMENT EUNIL Co., Ltd. Everyday is a good day ( 株 ) 誾日 PCB Router / Depanel machine is used to separate the arrayed printed circuit board (PCB) / printed wiring board (PWB) from the main panel PCB. This equipment is automatically supplied PCB from the downstream machine or manually loaded PCB by the operator. This machine is using the high revolution milling spindle to separate PCB. It would be connected with the automatic PCB unloading system as an option. It could be applied to Screw Application machine.

3. http://www.eunil.com World Wide Leader PCB HANDLING EQUIPMENT EUNIL Co., Ltd. Everyday is a good day ( 株 ) 誾日 PCB Router / Depanel machine : Off-Line ETR-200 This machine is used to separate the main panel PCB and the arrayed PCB as off-line. The operator manually load PCB to the machine. Then, the machine will separate the PCB by the program. When it finishes the job, the PCB will be unloaded by the operator. The movement is controlled by the robot, 2 X-Axis, 1 Y-Axis, 1 Z-Axis. It has a single spindle head and it will also have dual spindle head as an option. It has two shuttle, working bay, which has the safety feature. The shuttle has PCB holding fixture for every different model of PCB. It will suck out the dust or the milling particles to the dust collector. It has the bit optimization and the bit break detection as an option.

4. http://www.eunil.com World Wide Leader PCB HANDLING EQUIPMENT EUNIL Co., Ltd. Everyday is a good day ( 株 ) 誾日 PCB Router / Depanel machine : Off-Line ETR-200 Features Movement : X, Y, Z Axis Working Bay : Shuttle Programming : PLC and Robot teaching Monitor and Operating : 5 ” Touch screen Bit : Quick change Safety : Door and Barrier Optimal sensor Option Bit optimization : Count No. of worked PCB Bit break detection Dual head spindle

5. http://www.eunil.com World Wide Leader PCB HANDLING EQUIPMENT EUNIL Co., Ltd. Everyday is a good day ( 株 ) 誾日 PCB Router / Depanel machine : Off-Line ETR-200 Specification Machine size (mm)1,200 X 1,250 X 1,600 PCB size (mm)330 X 250 ~ 50 X 50 No. of HeadSingle (Dual as option) Robo t X-Axis600mm stroke Y-Axis600mm stroke Z-Axis100mm stroke Repeatabilit y ±0.02mm SpeedMax. 1,000mm/sec SpindleMax. 60,000rpm milling spindle Power supply220V[±5%], 50~60Hz, 1Phase Power consumption5,000 Watt Air supply5 bar ProgrammingPLC & Robot teaching

6. http://www.eunil.com World Wide Leader PCB HANDLING EQUIPMENT EUNIL Co., Ltd. Everyday is a good day ( 株 ) 誾日 PCB Router / Depanel machine : Off-Line ETR-200 Head & Spindle Specification No. of HeadSingle (Dual as option) Spindl e SpeedMax. 60,000 rpm Power150W, 30V, Max. 1,000Hz TypeMilling MakerKAVO BitTypeChipbreaker, Downdraft Life time90 M Recommen d Cut condition 38,000 rpm 83mm/sec movement ( It would be different due to PCB condition ) Size Ø 1.6mm

7. http://www.eunil.com World Wide Leader PCB HANDLING EQUIPMENT EUNIL Co., Ltd. Everyday is a good day ( 株 ) 誾日 PCB Router / Depanel machine : Off-Line ETR-200 Robot Specification Robo t X-Axis600mm stroke Y-Axis600mm stroke Z-Axis100mm stroke SpeedMax. 1,000mm/sec Shuttl e No. of shuttle 2 shuttles Fixture1 PCB holding SafetyOptimal sensor Safety : Barrier Optimal Sensor Shuttle : 1 PCB holding fixture ( Photo as option) X-Axis Z-Axis Y-Axis

8. http://www.eunil.com World Wide Leader PCB HANDLING EQUIPMENT EUNIL Co., Ltd. Everyday is a good day ( 株 ) 誾日 PCB Router / Depanel machine : Off-Line ETR-200 Dust collector Specification Size (mm)450 X 520 X 900 BlowerVolume25 m³/min Pressure230 mmAq Motor1.5 kw FilterMaterialPolyester CleaningManual

9. http://www.eunil.com World Wide Leader PCB HANDLING EQUIPMENT EUNIL Co., Ltd. Everyday is a good day ( 株 ) 誾日 PCB Router / Depanel machine : Off-Line ETR-200 Routing PCBs Feature Best condition for using PCB Router / Depanel machine Recommended High rate of bit break Short bit life time Create lots of dust / routing particles