1. Advantys ETB Ethernet IP67 I/O

2. Advantys ETB
Introducing Schneider Electric’s new family of IP67 rated I/O modules that connect to Ethernet.

3. Advantys ETB Ethernet IP67 I/O modules
Direct connection to the Ethernet network with models that support:
Ethernet Modbus TCP/IP Protocol
EtherNet/IP Protocol
Direct mounting on equipment, eliminates need for enclosures
IP67 rated modules suited for harsh environments
Complete product offer with a full set of power, sensor, and Ethernet cables and accessories

4. Product overview Product features & specifications System view Competitive position Cost comparisons Customer values

5. Product overview 16 Point Digital Modules: available types
16 digital Inputs
12 Inputs/ 4 2 Amps
8 Inputs / 8 2 Amps
16 digital Inputs/Outputs configurable
Ethernet Protocols supported
EtherNet/IP
Modbus TCP/IP
Protection Level, IP67 Watertight
Extended Operating Temp °C to + 70°C
Built-in 2 port switch for Daisy Chain Connection
Integrated Web Server
Scrolling LED Display

6. Product overview Modbus TCP/IP EtherNet/IP
ETB 1EM 16C POO point module, configurable as inputs or outputs
ETB 1EM 16E PPO point input module
ETB 1EM 12E 04S PPO point input / 4 point output module
ETB 1EM 08E 08S PPO point input / 8 point output module
EtherNet/IP
ETB 1EI 16C POO point module, configurable as inputs or outputs
ETB 1EI 16E PPO point input module
ETB 1EI 12E 04S PPO point input / 4 point output module
ETB 1EI 08E 08S PPO point input / 8 point output module

7. Product overview Product Features 2- Power connections, type 7/8
threaded connectors
8 – Input/ Output point ports,
2 I/O points per connector, for
M12 threaded and Ultra-Lock connectors
Scrolling 4 digit LED Display
2 – Switched Ethernet communication ports, for M12 threaded and Ultra-Lock connectors

8. Product overview Complete Product Offer – Cables and Accessories
Power Cables
Available in versions with connector at each end or with single connector at one end for connection to Power Supply.
4 Pin connector versions for EtherNet/IP
5 Pin connector versions for Modbus TCP
Sensor Cables
Available in versions with M12 threaded connectors or with quick release Ultra- Lock connectors. Also available are splitter cables to connect 2 sensors to a single I/O port.
Ethernet Communication Cables
Available in versions with an RJ 45 connector at one end and an M12 connector at other end, or versions with 2- M12 connectors.
(Note: The cable jacket material is approved for both the European and North American markets)

9. Product overview Module with cables and accessories
Power Supply Cables
to additional modules
Power Tee
Processor
Splitter Cable
to sensors
Power
Supply
Ethernet Cable
Adapter
Ethernet Cable to
connect next module
Power Receptacle
Enclosure

10. Target markets for IP67 I/O
Installed Base Customers - Automotive
Machining
Component Assembly
Body Assembly
Food and Beverage
Bottling
Packaging
Material Handling
Other
Mining, Minerals, & Metal – Material Handling
Printing
Pulp & Paper – Pulping
Paper Machine Wet End

11. Target markets for IP67 I/O
Where to use Ethernet IP67 rated I/O Modules
Harsh Environments that include:
Oil and/or water spray
Extended operating temperature -25 to + 70°C
High vibration and shock
I/O Modules must or can be mounted directly on equipment
Field devices are located near I/O Modules, no long wire runs
There is no space available for I/O cabinets at location
Need to reduce the cost and time to install the I/O modules
Field devices selected are available with M12 connectors
Customers are using Ethernet as their industrial communication network

12. Product overview Product features & specifications System view Competitive position Cost comparisons Customer values

13. Product features Built for operation in harsh environments Benefit
IP67 Rated Module Package, Connectors, and Cables
Extended Operating Temperature Range -25°C to + 70°C
Flexible Mounting System
Benefit
Watertight, can be used in locations with oil and water spray
Used on plant floor or outdoors
Mounts directly on equipment – no need for enclosure

14. Product features Reduced installed cost – Ethernet Switch
Built-in 2 Port Unmanaged Ethernet Switch with cross-over capability - allows daisy chain connections for Ethernet with no need for external switches
Daisy-chain connection for Power Supply
Power Supply
Daisy Chain
connection –
Up to 10 Modules
Processor
Ethernet

15. Product features
Reduced Installed Cost - M12- Ultra-Lock quick release Connector
Faster and easier to connect then standard threaded M12
Easy to connect – even when difficult to access
Snap on for IP67 sealing of connections
Standard M12-connectors can also be used on modules

16. Product features
Reduced Installed Cost – Built-in Display with Control Buttons
4-Character LED Display allows diagnosis without additional tools
Shows Current IP Address
Displays IP Address Configuration Mode
Control Buttons for Setting IP Address in Static Mode
Displays Errors
Network functions are displayed (e.g. ping)

17. Product features
Reduced Installed and Operating Cost – Integrated Web Server provides the following capabilities
Password Protection for Security
Module Configuration - IP Address, Module Parameters, and WDT Error behavior
Module Status Information
Remote Access and Diagnosis via Web – Interface
No additional software tool needed for configuration and diagnosis

18. Product features Module diagnosis
Output Power
Power present
Power not connected
Module & Input Power
Power present
Power not connected
Input / Output
Input / Output on
Input / Output failed
Input / Output off
Ethernet Port
100MBit Communication
10MBit Communication
Display with information about Ethernet address, IO & watchdog status

19. Module specifications
Common specifications for all modules
Number of I/O Points 16 Digital Points per Module
I/O Configurations 16 Inputs
12 Inputs / 4 Outputs
8 Inputs / 8 Outputs
16 I/O Points, User configurable
I/O Points per Connectors 2 Points
Power Requirements 24 VDC – Module and Input Power
13 to 28 VDC, 8 amp max. Outputs
Input Type Compatible with Contact and 3 wire devices
Input Delay 2.5 ms default, user configurable
Output Current 2 amps per Output, 8 amps per Module
Output Protection Electronic Short Circuit Protection
Max. Switching Frequency 200 Hz
Short Circuit Current 6.5 Amps (typical)

20. Module specifications
Common specifications for all modules (continued)
Operating Temperature -25°C to + 70°C ( -4° to + 158°F)
Storage Temperature -40°C to + 85°C ( -40° to + 185°F)
Protection IP67 according to IEC 60529
Vibration IEC
Mechanical Shock 10G, 11 ms, 3 axis
MTBF 100,000 Hours
Power Connectors 7/8 Connectors, 5 pin for Modbus TCP/IP
4 pin for EtherNet/IP
Ethernet Connections M12 and Ultra-Lock Connectors, 4 pin
I/O Connectors M12 and Ultra-Lock Connectors, 5 pin

21. Product overview Product features & specifications System view Competitive position Cost comparisons Customer values

22. Typical system configuration
Ethernet (Modbus TCP/IP) based control system using a combination of IP67 and IP20 I/O
PC/
Supervisory System
Ethernet Switch/ M1 Processor
Advantys ETB IP67 I/O
mounted on equipment
Advantys STB IP20 I/O
mounted in cabinets

23. Typical system configuration
Control system topology for EtherNet/IP network
PLC or IPC
EtherNet/IP
Switch
Advantys ETB IP67 I/O mounted on equipment

24. Typical system configuration
Ethernet (Modbus TCP/IP) modules can be used with the following Schneider control systems:
Quantum system with NOE Ethernet interface
Premium system with ETY Ethernet interface
M340 system with NOE Ethernet interface
Momentum system using M1E Ethernet processors

25. Typical system configuration
EtherNet/IP modules can be used with the following Schneider control systems along with other control systems:
Quantum system with NOC Ethernet interface
Premium system with ETC Ethernet interface
Rockwell ControlLogix and CompactLogix systems = opportunity at competitive accounts

26. Typical I/O configuration
Advantys ETB I/O has the flexibility to be installed in the following configurations:
Daisy Chain
Star
Combination

27. Typical I/O configuration
Daisy Chain I/O configuration
Where to use
Systems with I/O count under 160 I/O points
Installations where I/O blocks are within 5 meters of the next block
Applications where installed cost is an issue
Advantages
Lower installed cost
Eliminates external switch
Easy to expand system
Simplified troubleshooting and maintenance
Limitations
Up to 10 modules per Daisy Chain
Disconnecting 1 module will shut down the following modules in the daisy chain

28. Typical I/O configuration
Star configuration
Where to use
Systems with large number of I/O points
Installations where the I/O is not concentrated in one area
Applications where system will be changing, with modules added, disconnected and reconnected to the network
Advantages
Large number of modules per system (limitation is number of switches)
Flexible module location
Disadvantages
Higher installed cost, switches
Longer cable runs, adds complexity
Maintenance requires additional effort

29. Typical I/O configuration
Combination of Star and Daisy Chain configuration
Where to use
Large systems with multiple machine or work areas
Advantages
Segments modules into groups for each area
Simplifies installation and troubleshooting
Has lower installed cost than Star only network
Disadvantages
Most effective for larger systems

30. Typical field devices
Advantys ETB I/O can connect directly to sensors and field devices that are available with M12 connectors and are IP67 rated.
Schneider Electric Sensors include:
-Osiprox XS6 and XS8 Inductive Sensors
-Osiris XUB Photoelectric Sensors
-PhotoVirtu XUN Teachable Sensors
-VM1 Ultra Sonic Sensors
For the full range of Schneider Electric sensors, please visit our web site:

31. Product overview Product features & specifications System view Competitive position Cost comparisons Customer values

32. Competitive advantages
Built-in Ethernet Switch Save time and money by eliminating the need for external switches to connect modules
Integrated Web Server Simplifies Module Configuration & Diagnostics
No Additional Software Required
4 Character Display Real Time Ethernet and Diagnostic Information
Quick Release Connectors Fast connection to communications, and field devices

33. Competition

34. Product overview Product features & specifications System view Competitive position Cost comparisons Customer values

35. IP67 I/O cost advantages Lower installed cost
No need for cabinet or enclosure
Plug-in cables for Power, I/O, and Ethernet Communications
Simplified configuration via Web Pages or HMI Display
Total Installed Cost €825.70
€655.00
Traditional I/O System
Advantys ETB I/O
I/O Modules
Terminal Blocks
Wiring Duct
Field Sensors and Actuators

36. Installed cost comparison 16 I/O points
Traditional I/O system (IP20) includes the following;
NEMA 4 metal enclosure 16”x12”x8”
2 wires per device
Wiring from I/O module to Terminal blocks
Wiring from Terminal blocks to Field Devices
Power Wiring coming from outside 24 VDC Power Supply
Mounting I/O Module and Terminal Blocks
Labels for all wires
Advantys ETB IP67 Rated I/O modules includes the following
Power, Sensor, and Ethernet Cables
Labor to install 10 threaded type connectors into module
Not included in the installed cost comparison
I/O Modules, power supply, sensors or actuators
Labor to mount I/O module or enclosure on machine

37. Installed cost comparison Advantys ETB IP67 vs IP20
26%
lower installed cost for Advantys ETB I/O
Summary of installed cost for 16 I/O points on Ethernet:
Advantys ETB IP20 I/O
Module cost (net)…… € €204.00
Installation cost……… € €671.70
Total cost € € = € less

38. Installed cost comparison 16 I/O points

39. Product overview Product features & specifications System view Competitive position Cost comparisons Customer values

40. Customer values Simple Installation Easy to Configure
I/O mounted directly on equipment eliminates the need for enclosures
Quick Release Connectors allow fast connection to power, communications, and field devices
Direct Connection to Ethernet Network without the need for external switches
Easy to Configure
Built-in Ethernet Switch for Network connections
Web Pages and Display simplifies integration and commissioning
Solution Approach
Can be combined with Schneider PLC’s, sensors, actuators, drives, and IP20 I/O for a total control system package
Complete solution with cables and accessories