1. DL/ID Card Design Specification 1 2004 Responsible Retailing Forum Rich Carter (AAMVA) 2004 Responsible Retailing Forum The Next Generation of State IDs The AAMVA DL/ID Card Design Specification Rich Carter (AAMVA)

2. DL/ID Card Design Specification 2 Approved by AAMVA Board at their September Meeting Published on AAMVA web site: –www.aamva.org/Documents/stdAAMVADL IDCardSpecs_092003.pdf Supercedes AAMVA DL/ID-2000

3. DL/ID Card Design Specification 3 Overview The Development Process Reporting Problems and Providing Comment Review of the Specification Verification of DL/ID Cards

4. DL/ID Card Design Specification 4 Who is AAMVA? American Association of Motor Vehicle Administrators –Established in 1933 –Non-profit, tax exempt –Membership: All U.S. and Canadian jurisdictions U.S. and Mexican federal governments Over 150 associate members

5. DL/ID Card Design Specification 5 What is AAMVA’s Role? AAMVA is the technical expert in the area of driver licensing. AAMVA is making recommendations to: –Governors –State Legislators –Congress –The Administration Recommendations must be supported by evidence.

6. DL/ID Card Design Specification 6 DL/ID Card Fraud & Abuse Apply for a license in more than one state. Use false breeder documents to obtain real license. Modify a real document. Create counterfeits. Steal DMV Equipment and Inventory. Bribe a DMV employee.

7. DL/ID Card Design Specification 7 Uniform Identification Subcommittee Responsible for implementation of the Secure ID Strategy Coordinates activities of 14 UID Task Groups

8. DL/ID Card Design Specification 8 UID Task Groups UID1 – Acceptable ID List UID2 – Residency UID3 – Fraudulent Document Recognition Training UID4 – Internal Controls UID5 – Oversight Compliance System UID6 – Model Legislation UID7 – Card Design SpecificationUID7 – Card Design Specification UID8 – Verification UID9 – Unique Identifier UID10 – Enforcement and Controls UID11 – Driver License Agreement UID12 – DRIVerS UID13 – Process/Procedures UID 14 - Privacy

9. DL/ID Card Design Specification 9 Development Process Card Specification Task Force –User forums –Vendor forums –Careful research and deliberation Full UID Subcommittee AAMVA Executive Board AAMVA Board

10. DL/ID Card Design Specification 10 Help with Interpretation and Problem Reporting Rich Carter Director, Technology Standards and Programs AAMVA 4301 Wilson Blvd., Suite 400 Arlington, VA 22203 Phone: 703.908.8296 Email: rcarter@aamva.org

11. DL/ID Card Design Specification 11 Functional Requirements Evidence of the privilege to drive Identification Age verification Address/residence verification Automated administrative processing

12. DL/ID Card Design Specification 12 Three Key Concepts Interoperability Commonality Security

13. DL/ID Card Design Specification 13 A More Common Appearance Use of zoned layouts Tighter standards for the picture Common security feature

14. DL/ID Card Design Specification 14 Two Basic Layouts Horizontal – 21 and over Vertical – under 21 –Only the front is vertical

15. DL/ID Card Design Specification 15 DL/ID Card Zones Zone I –Document type indicator “DRIVING LICENCE” “IDENTIFICATION CARD” –Background colors Pink for the DL Green for the ID –Issuing jurisdiction –Issuing country

16. DL/ID Card Design Specification 16 DL/ID Card Zones Zone II –Most of the data elements –Digitized signature (one choice) Zone III –The portrait Full-face for all 70-80% of Zone Three –Digitized signature (the other choice)

17. DL/ID Card Design Specification 17 Common Security Device An Optical Variable Device or OVD Always in Zone 4 (back of the license) Primarily a Level 1 device, but will have some Level 2 features

18. DL/ID Card Design Specification 18 Goals for the OVD Simple, recognizable design Difficult to copy or simulate Easily learned methods of validation

19. DL/ID Card Design Specification 19 OVD Features The Task Force is strongly considering these features for the OVD: –Level 1 (visible to naked eye) 3-D art work Parallax clue Color movement Flip image –Level 2 (needs a tool) Nanotext Feature that uses a special light source, such as laser or ultraviolet

20. DL/ID Card Design Specification 20 The Common MRT MRT = machine-readable technology The requirement –The PDF-417 bar code must be used –A second MRT may be used in addition Steps taken to improve implementation

21. DL/ID Card Design Specification 21 DL/ID Card Verification Each business will determine the level of verification they will use based on their own assessment of their own risk. For example: –Library may just look at Level 1 feature(s). –Bars may look at Level 1 and Level 2. –Airlines may want to electronically verify the license with the issuing agency.

22. DL/ID Card Design Specification 22 Questions