1. For PROLiNK TA8 Honeycomb 3.2 Upgrade
Download Tool SOP
For PROLiNK TA8 Honeycomb 3.2 Upgrade
August 08, 2011 1

2. Tools and Software Required
TA8 Android Tablet
01 x Micro USB cable
01 x Safety Pin (or pointed pin with 1mm diameter)
01 X PC (Win XP and above)
Download Nvidia driver and Honeycomb 3.2 image from this link

3. Boot-recovery Driver Installation
Download the Duke Update Utilty and the firmware from the Download section of
Install android_tegra_250_FroyoOV5650v1.msi , to your PC
Double click the “android_tegra_250_FroyoOV5650v1.msi”

4. Boot-recovery Driver Install
Click the “Next” to continue

5. Boot-recovery Driver Install
Select “I accept the terms in the License Agreement”
Click “Next” 1. 2.

6. Boot-recovery Driver Install
Click the “Typical”

7. Boot-recovery Driver Install
Click the “Install”

8. Boot-recovery Driver Install
Click the “Finish”

9. Boot-recovery Driver Install
After the installation, you can find the APX driver in C:\Program Files\NVIDIA Corporation\android_tegra_250_Froyov1\usbpcdriver

10. Boot-recovery Driver Install
Select and copy all the files under the Driver > Patch folder

11. Boot-recovery Driver Install
Paste all the files to “C:\Program Files\NVIDIA Corporation\android_tegra_250_Froyov1” folder
Copy and Replace all the conflicts files

12. Boot-recovery Driver Install
Power off the tablet
Connect up the PC and tablet with the Micro USB cable
Press the Recovery button with the safety pin + Power button at the same time for 3 secs and let go
Check if there is an USB device named “!APX” detected on your PC device manager

13. Boot-recovery Driver Install
Right click “!APX” and select “Update driver” > Browse my computer for driver software > C:\Program Files\NVIDIA Corporation\android_tegra_250_Froyov1\usbpcdriver > Next

14. Boot-recovery Driver Install
After installation, a USB device named “NVIDIA USB Boot-recovery driver for Mobile devices” would be found on your PC Device Manager

15. Outline
Boot-recovery Driver Install
Image Download

16. Image Download Power OFF the tablet
Connect up the PC and tablet with the Micro USB cable
Press the Recovery button with the safety pin + Power button at the same time for 3 secs and let go
A USB device named “NVIDIA USB Boot-recovery driver for Mobile devices” would be found on your PC Device Manager

17. Image Download Open 0.J05401.00501GEN-enFR.110804.0 folder
Double click on the “nvflash.bat”

18. Image Download
Press any key to start the image download