1. Audio Levels in TRICX

2. TRICX-AIU BOARD TESTER

3. Utility to control TRICX-AIU inputs and outputs o Use to select mic source for testing levels Installed by default on operator PCs Has rudimentary oscilloscope Can't be run at the same time as TRC-Ops...

4. Digital audio

5. Setting mic gain Want to set mic gain so that the digital signal is: Not too low (poor signal to noise) Not too high (distorted) Mic level is set within TRC-Ops

6. New! for Windows 7 In Windows 7, there is extra mic gain setting Found in control panel Setting of "10" seems to work: use TRC-Ops for fine control.

7. Radio output levels With the mic gain set in TRC-Ops, use the gain control in the TRip unit to control output level: audio set speaker {gain} Use test set to measure actual output.

8. Receive audio levels Use TRip gain to match radio output: audio set mic {gain} Can test the actual level of digital audio using Wireshark/audacity/etc...

9. Receive audio controls in TRC-Ops Separate controls for o Select audio in headset one/two o Monitor audio in headset one/two o Loudspeaker monitor o Loudspeaker select TRC-Ops audio has AGC on receive audio

10. Telephone levels Depends on the device... For Vegastream gateways, two stages of gain: o Within the POTS interface o Within the voice CODEC