1. SINGLE-PHASE HOPPER LOADERS 6.98.543.0.ENG

2. FEEDING SINGLE-PHASE FEEDER 2

3. FEEDING SINGLE-PHASE FEEDER 3 APPLICATIONS: -They are machines planned to intake plastic granule located beside the transforming machine. -They operate by a blower coupled to a single-phase motor. -They are suitable for the feeding of low tonnage presses, extruders, small blowing machine, drying hopper or dosing unit’s hoppers. -They can be directly fixed on the through of the transforming machine by interposing a maintenance hopper.

4. FEEDING SINGLE-PHASE FEEDER 4 The single-phase hopper loaders are suited for the transport of plastic granules in vacuum. The main features are: - Stainless steel construction - Programming by palmtop - Integrated proportional valve (VP) control - Tissue filter with filter cleaning as standards - High visibility lamp - Alarm for loading failure These characteristics make a powerful and reliable machine. FEATURES:

5. FEEDING SINGLE-PHASE FEEDER 5 MODELPower W Capacity dmc Production Kg/h Pipelines diam. mm F1 1000130 F3 100035040 F5 100058040 THE RANGE:

6. FEEDING SINGLE-PHASE FEEDER 6  Double-stage blower  Motor “soft start” feature  Polyester tissue filter  High visibility signaling lamp  Compressed air storage tank for filter cleaning  Discharge outlet, equipped with gasket on the edge  Electronics with integrated control for proportional valve  Small filtered inspection door COMPETITIVE ADVANTAGES :

7. FEEDING SINGLE-PHASE FEEDER 7 High prevalence and low noisiness transport system using a mono-phase motor and a double stage blower. COMPETITIVE ADVANTAGES : Double-stage blower

8. FEEDING SINGLE-PHASE FEEDER 8 The logic of control adjust the applied tension gradually rather than in a sudden way making the life time of the blower longer. Soft start COMPETITIVE ADVANTAGES : Motor soft-start device

9. FEEDING SINGLE-PHASE FEEDER 9 Tissue filter with high filtering capacity. Filter cleaning as standards, can be shaped according to the user necessities, to reduce manual interventions. Oriented air jets for a high efficient cleaning. COMPETITIVE ADVANTAGES : Filter in polyester

10. FEEDING SINGLE-PHASE FEEDER 10 It allows to control the state of the machine operations also at long distance. COMPETITIVE ADVANTAGES : High visibility signaling lamp

11. FEEDING SINGLE-PHASE FEEDER 11 The stainless steel tank avoids problems of oxidation due to damp compressed air. For Moretto it is a standard. COMPETITIVE ADVANTAGES : Storage tank in stainless steel

12. FEEDING SINGLE-PHASE FEEDER 12 Detail of the discharge outlet. It comes equipped with an edge gasket. It garantees a perfect closing of the outlet also under critical conditions. COMPETITIVE ADVANTAGES : Edge gasket

13. FEEDING SINGLE-PHASE FEEDER 13 Electronics in SMD and integrated control of the proportional valve (VP). Electronic board equipped with serial port RS485 for palmtop connection. Programmable loading time by dip-switch or by Master 200. COMPETITIVE ADVANTAGES : Electronics of control

14. FEEDING SINGLE-PHASE FEEDER 14 COMPETITIVE ADVANTAGES : Filtered inspection door The inspection door allows an easy access to the discharge area. It is filtered and provided with a fast and safe lock device.

15. FEEDING SINGLE-PHASE FEEDER 15 1.Remoted palmtop (Master 200) 2.Proporzional valve 3.Double pipe suction probe 4. Maintenance hoppers 5. Acoustic alarm OPTIONALS:

16. FEEDING SINGLE-PHASE FEEDER 16 It is the IN/OUT digital interface for setting and the protection of the machine’s parameters through two levels of password: “user” and “superuser”. OPTIONALS: 1. Remoted palmtop

17. FEEDING SINGLE-PHASE FEEDER 17 Aluminium diecasting with seal gasket for the recovery of the regrind and natural material in the requested proportions. The setting of the materials percentage need the palmtop. OPTIONALS: 2. Proporzional valve

18. FEEDING SINGLE-PHASE FEEDER 18 Two types of suction probes are available: -single pipe for medium suction capacity and natural materials -double pipe for regrind or difficult material. OPTIONALS: 3. Suction probes

19. FEEDING SINGLE-PHASE FEEDER 19  TMM  TMX with Pyrex body Two types of hoppers are available for direct installation on the transforming machine: OPTIONALS: 4. Maintenance hoppers

20. FEEDING SINGLE-PHASE FEEDER 20 It is possible to install an acoustic alarm on the control panel. It can signal possible anomalies, in addition to the light alarm. OPTIONALS: 5. Acoustic alarm