Presentation is loading. Please wait.

Presentation is loading. Please wait.

1 Design and drawing of RC Structures CV61 Dr. G.S.Suresh Civil Engineering Department The National Institute of Engineering Mysore-570 008 Mob: 9342188467.

Similar presentations


Presentation on theme: "1 Design and drawing of RC Structures CV61 Dr. G.S.Suresh Civil Engineering Department The National Institute of Engineering Mysore-570 008 Mob: 9342188467."— Presentation transcript:

1 1 Design and drawing of RC Structures CV61 Dr. G.S.Suresh Civil Engineering Department The National Institute of Engineering Mysore-570 008 Mob: 9342188467 Email: gss_nie@yahoo.com

2 2 Learning out Come Content of the course Scheme of Examination Reference Books Introduction to structural Drawing General Lay out Drawings Case Study on Lay out drawings

3 3 Contents of the Course Part-A (Structural Detailing including Bar bending ) Layout Drawing Beams and Slabs Stair case Column Footing

4 4 Contents of the Course (Contd.) Part-B (Design and Drawing ) Portal Frame Water Tanks Retaining Wall Combined footing

5 5 Scheme of Examination Part A Answer 2 questions out of 3: Each 20 Marks Part B Answer 1 Question out of 2: 60 Marks Duration: 4 Hours

6 6 Reference Books

7 7 STRUCTURAL CONCEPTS AND SYSTEMS FOR ARCHITECTS & ENGINEERS -T.Y.LIN & S.D.STOTES BURY -JOHN WILLEY & SONS. REINFORCED CONCRETE DESIGNER’S HANDBOOK -CHARLES REYNOLDS & JAMES STEEDMAN -SPON

8 8 HANDBOOK OF CONCRETE ENGINEERING -MARK FINTEL -CBS PUBLISHERS & DISTRIBUTORS Hand book on Design and Detailing of Structures -P.Dayaratnam -Wheeler Publishing

9 9 MULTI-STORY FRAMES – CALCULATION & MOMENT TABLES. -Dr.ENG.F.TAKABEYA -WILHELM ERNST & SONS. Reinforced Concrete Structures Vol.1 and Vol.2 -B.C.Punmia -Lakshmi Publication Structural Design and Drawing -N.Krishna Raju -University Press

10 10 HANDBOOK ON CONCRETE REINFORCEMENT AND DETAILING – SP34 (S&T) – BIS REINFORCED CONCRETE DETAILER’S MANUAL – B.W.BOUGHTON – ELBS ACI DETAILING MANUAL – AMERICAN CONCRETE INSTITUTE

11 11 REINFORCEMENT DETAILING MANUAL – ROBIN WHITTLE – A VIEW POINT PUBLICATION. REINFORCED CONCRETE STRUCTURES – R.PARK & T.PAULAY – JOHN WILEY & SONS Problems in Structural Drawing – A.Yakubovich – MIR Publishers

12 12 1. LAYOUT DRAWING

13 13 Introduction Drawing is the language of engineers Structural drawings guide builders in the construction The guidelines given in IS 962 and SP 34 Drawings are prepared in different sizes In large projects, the structural drawings are of same size

14 14 Introduction (Contd.) Sl. No.Designation Trimmed Size in mm Un Trimmed Size (Min) in mm 1A0841 x 1189880 x 1230 2A1594 x 841625 x 880 3A2420 x 594450 x 625 4A3297 x 420330 x 450 5A4210 x 297240 x 330 6A5148 x 210165 x 240 PAPER SIZE

15 15 MARGINS AND DIVISION OF DRAWING SHEETS A0 Size

16 16 MARGINS AND DIVISION OF DRAWING SHEETS A1 Size

17 17 MARGINS AND DIVISION OF DRAWING SHEETS A2 Size

18 18 MARGINS AND DIVISION OF DRAWING SHEETS A3 Size

19 19 MARGINS AND DIVISION OF DRAWING SHEETS A4 Size

20 20 MARGINS AND DIVISION OF DRAWING SHEETS A5 Size

21 21 Introduction (Contd.) Title blocks are provided at right bottom corner

22 22 Layout of Structural Drawing

23 23 Scale: Plan:- 1:100, 1:50 Elevation:- 1:5, 1:30 Sections:- 1:50, 1:30, 1:25, 1:20,1:15,1:10

24 24 Symbols Symbols Relating to Cross-Sectional Shape and Size of Reinforcement  plain round bar or diameter of plain round bar; plain, square bar or side of plain square bar; # deformed bar (including square twisted bar) or nominal size (equivalent diameter or side) of the deformed bar.

25 25 Symbols Symbols Relating to Shape of the Bar along its Lengths Alt Alternate bar Bt Bent bar B Bottom bar min Minimum max Maximum St Straight bar StpStirrup Sp Spiral Ct Column tie T Top bar

26 26 Symbols Symbols Relating to Position and Direction EW Each way @Spacing centre-to-centre Limit of area covered by bars Direction in which bars extend

27 27 Symbols Relating to Various Structural Members Bm or B Beams Col Column(s) Fg Footing(s) GR Girders JT Joints(s) LL Lintel(s) LB Lintel beam(s) Sb or S Slab(s) WL Longitudinal wall Wx Cross wall C Centre line

28 28 Graphical Symbols

29 29 Graphical Symbols Contd.

30 30 Graphical Symbols Contd.

31 31 Structural Lay-Out Drawing Positioning and orientation of columns Positioning of beams Spanning of slabs Layout of stairs Selecting proper type of footing

32 32 Structural Lay-Out Drawing Two axes marked one side with alphabets and the other with numbers. Columns are marked at the intersection of grids Beams are marked using two parallel lines Slabs are indicated either as one way or two way

33 33 Structural Lay-Out Drawing: Column & Footing A B C D 1234

34 34 Structural Lay-Out Drawing

35 35 Structural Lay-Out Drawing A B C D 1234

36 36 Structural Lay-Out Drawing

37 37 Summary Introduction to structural Drawing General Lay out Drawings Procedure for drawing column and foundation Lay-Out Drawings Procedure for drawing beam Lay-out Drawings Case Study on Lay out drawings

38 38 Dr. G.S.Suresh Civil Engineering Department The National Institute of Engineering Mysore-570 008 Mob: 9342188467 Email: gss_nie@yahoo.com


Download ppt "1 Design and drawing of RC Structures CV61 Dr. G.S.Suresh Civil Engineering Department The National Institute of Engineering Mysore-570 008 Mob: 9342188467."

Similar presentations


Ads by Google