1. Sixth Grade Block 3

2. Common Core State Standards
6.RP.3d Use ratio reasoning to convert measurement units; manipulate and transform units appropriately when multiplying or dividing quantities.

3. Ratio Table
The table shows the approximate weights, in tons, of several large land animals. Convert each weight from tons to pounds.
Step 1 Make a ratio table.
Animal
Weight (T)
Grizzly Bear 1
White Rhinoceros 4
Hippopotamus 5
African Elephant 8
Tons 1 4 5 8
Pounds
2,000
8,000
10,000
16,000

4. Step 2 Graph the ordered pair (tons, pounds) from the table on
the coordinate plane.

5. Practice Solve these problems by making a table and then
graph the data.
Check with your partner to see if you agree.

6. Unit Ratio
Each relationship in the table can be written as a ratio. For example, you know that 1 yard = 3 feet. You can use the ratio
3 ft/1 yd to convert from yards to feet.

7. Dividing Out
Use multiplication to introduce dividing out common units.
5 boxes • 8 crayons/box = 40 crayons

8. Convert Larger Units to Smaller Units
Like a unit rate, a unit ratio is one in which the denominator is 1 unit. So, the ratio
3 ft/1 yard is a unit ratio.
Dimensional analysis is the process of including units of measurement as factors when you compute.

9. Convert 20 feet to inches.
Since 1 foot = 12 inches, the unit ratio is 12 in.
1 ft
20 ft = 20 ft • 12 in.
= 20 • 12 in.
= 240 in.
So, 20 feet = 240 inches.

10. Marco mixes ¼ cup of fertilizer with soil before planting each flower bulb. How many fluid ounces of fertilizer does he use per flower bulb?
¼ cup = ¼ cup • 8 fl oz
1 cup
= ¼ • 8 fl oz
= 2 fl oz
So, 2 fluid ounces of fertilizer are used per flower bulb.

11. Convert Smaller Units to Larger Units
The ratios 1 yd/3 ft and 3 ft/1 yd are equivalent. To convert from smaller units to larger units, choose the ratio that allows you to divide out the common units.
12 ft • 1 yd ft • 3 ft
3 ft yd

12. Convert 15 quarts to gallons.
Since 1 gallon = 4 quarts, and quarts are smaller
units than gallons, use the ratio 1 gal/4 qt.
15 qt = 15 qt • 1 gal
4 qt
= 15 • ¼ gal
= 3 ¾ gal or 3.75 gal

13. Miranda needs ½ pound of green beans for a recipe she wants to make
Miranda needs ½ pound of green beans for a recipe she wants to make. How many ounces of green beans does Miranda need?
½ lb = ½ lb • 8 oz
1 lb
= ½ • 8 oz
= 4 oz
So, Miranda needs 4 ounces of green beans.

14. Practice Check with your partner to see if you agree.
Solve these problems by using ratios.
Check with your partner to see if you agree.

15. Common Core State Standard
Use variables to represent two quantities in a real-world problem that change in relationship to one another; write an equation to express one quantity, thought of as the dependent variable, in terms of the other quantity, thought of as the independent variable. Analyze the relationship between the dependent and independent variables using graphs and tables, and relate these to the equation. For example, in a problem involving motion at constant speed, list and graph ordered pairs of distances and times, and write the equation d = 65t to represent the relationship between distance and time.

16. Function Tables
A ruby-throated hummingbird beats its wings about 52 beats per second.
A function is a relation that assigns exactly one output value to one input value. The number of wing beats (output) depends on the number of seconds (input). The function rule describes the relationship between each input and output. You can organize the input-output values and the function rule in a function table.

17. In a function, the input value is also known as the independent variable, since it can be any number you choose. The value of the output depends upon the input value, so the output value is known as the dependent variable.

18. Make a table to show how many times it beats its wings in 2 seconds, 6 seconds, and 20 seconds.
Number of Seconds (s)
s • 52
Wing Beats 2
2 • 52
104 6
6 • 52
312 20
20 • 52
1,040

19. Find the Output
The output is 7 more than the input. Complete a function table for this relation.
The function rule is x + 7. Add 7 to each input.
Input (x)
x + 7
Output (y) 10
10 + 7 17 12
12 + 7 19 14
14 + 7 21

20. Find the Input
The input and output of a function table can be represented as a set of ordered pairs, or a relation. The input represents the x-values and the output represents the y-values.
To find the input for a function table, use the work backward strategy to determine the input. If the output is found by multiplying by 3, then the input is found by dividing by 3.

21. The function rule is multiply by 3. Find the input.
Input (x) 3x
Output (y) 2
3(2) 6 5
3(5) 15 7
3(7) 21

22. The Gomez family is traveling at a rate of 70 miles per hour
The Gomez family is traveling at a rate of 70 miles per hour. The function rule that represents this situation is 70x, where x is the number of hours. Make a table to find how many hours they have driven at 140 miles, 280 miles, and 350 miles. Then graph the function.

23. Practice Solve these problems by making a table and then
graph the data.
Check with your partner to see if you agree.

24. Function Rules
A sequence is a list of numbers in a specific order. Each number in the list is called a term of the sequence.
Arithmetic sequences can be found by adding the same number to the previous term. In a geometric sequence, each term is found by multiplying the previous term by the same number.

25. The China Palace sells lunch specials for $6 with a delivery charge of $5 per order. Fill in the table with the next three numbers in the sequence.
Specials 1 2 3 4 5 6 7
Cost ($) 11 17 23 29 35 41 47

26. Arithmetic or Geometric Sequences?
Determining if a sequence is arithmetic or geometric can help you find the pattern. When you know the pattern, you can continue the sequence to find missing terms.

27. Practice each sequence. Then write the next three terms.
Describe the relationship between the terms in
each sequence. Then write the next three terms.
Check with your partner to see if you agree.

28. Find a Rule
A sequence can also be shown in a table. The table gives both the position of each term in the list and the value of the term.
List Table
8, 16, 24,…
You can write an algebraic expression to describe a sequence. The value of each term can be described as a function of its position in the sequence. Notice the value of each term is 8 times its position number. So, the function rule for the above sequence is 8n. The value of the term in position n is 8n. The position can be considered the input, and the value of the term as the output.
Position 1 2 3 10
Value of Term 8 16 24 n

29. To find the rule, determine the function.
The table shows the number of necklaces Ari can make, based on the number of hours she works. Write a function rule to find the number of necklaces she can make in x hours.
To find the rule, determine the function.
Notice that the values 5, 7, 9, … increase by 2, so the rule includes 2x. If the rule were simply 2x, then the number of necklaces in 1 hour would be 2. But this value is 5, which is three more than 2x.
Hours (x)
Number of Necklaces 1 5 2 7 3 9 x ?

30. Test the rule 2x + 3.
Row 1: 2x + 3 = 2(1) + 3 = or 5
Row 2: 2x + 3 = 2(2) + 3 = or 7
Row 3: 2x + 3 = 2(3) + 3 = or 9
The rule 2x + 3 represents the function table.

31. Practice Check with your partner to see if you agree.
Write a function rule to fit each situation.
Check with your partner to see if you
agree.

32. Functions and Equations
A linear function is a function whose graph is a line.
You can use an equation to represent a function. The input, or independent variable, represents the x-value, and the output, or dependent variable, represents the y-value. An equation expresses the dependent variable in terms of the independent variable.

33. The value of y is equal to 9 times the value of x
The value of y is equal to 9 times the value of x. So, the equation that represents the function is y = 9x.
Input, x 1 2 3 4 5
Output, y 9 18 27 36 45

34. Practice shown in the table.
Write an equation to represent the function
shown in the table.
Check with your partner to see if you agree.

35. Graph Linear Functions
You can also graph a function. If the graph is a line, the function is then called a linear equation. When graphing the function, the input is the x-coordinate and the output is the y-coordinate.
(input, output) (x, y)

36. Graph y = 2x
Step 1 Make a table of ordered pairs. Select any three values for x. Substitute these values for x to find y.
Step 2 Graph each ordered pair. Draw a line through each point.

37. Graph the function y = x + 3
(x, y)
0 + 3 3
(0, 3) 2
2 + 3 5
(2, 5)
5 + 3 8
(5, 8)

38. Practice Check with your partner to see if you agree.
Graph the function.
Check with your partner to see if you agree.

39. Martino constructed the graph shown,
which shows the height of his cactus
after several years of growth.
Make a function table for the input-output
values. Then write an equation that could be
used to find the height, y, of the cactus after
x years.
Since the output values increase by 2, the equation includes 2x. Each output value is 40 more than twice the input. So, the equation is y = 2x + 40.

40. Practice Make a function table for the input-output values. Write
an equation.
Check with your partner to see if you agree.

41. Multiple Representations of Functions
Words and equations can be used to describe functions. For example, when a rate is expressed in words, it can be written as an equation with variables. When you write an equation, determine what variables to use to represent different quantities.

42. The drama club is holding a bake sale
The drama club is holding a bake sale. They are charging $5 for each pie they sell. Write an equation to find the total amount earned, t, for selling p pies.
Words Total earned equals $5 times the number of pies sold.
Variable Let t represent the total earned and p represent the
number of pies sold.
Equation t = 5 • p
So, the equation is t = 5p.

43. In a science report, Mia finds that the average adult breathes 14 times each minute when not active. Write an equation to find the total breaths, b, a non-active person takes in m minutes.
Words The number of total breaths equals 14 times the number of minutes.
Variable Let b represent the total breaths and m represent the
number of minutes.
Equation b = 14 • m
So, the equation is b = 14m.

44. Practice Write a sentence that represents the context of the
problem. Then, write an equation to match the sentence.
Check with your partner to see if you agree.

45. Represent Functions Using Tables and Graphs
While in normal flight, a bald eagle flies at an average speed of 30 miles per hour.
Step 1 Write an equation and make a function table to show the relationship between the total distance, d, that a bald eagle can travel in h hours.
d = 30h
Number of Hours, h 1 2 3
Distance (miles), d 30 60 90

46. Step 2 Graph the ordered pairs of the function. Analyze the graph.
The graph is linear because for each hour of flight, the distance increases by 30 miles.