1. Welcome to the Milagrow Universe

2. How to download & Install Android 4.0.4 (ICS) on TabTop7.4

3. Step 0
Please take the backup of all your important data before installing Android on your TabTop, otherwise you may lose your important data such as documents, videos, pictures etc.
Connect Usb cable to the TabTop & then click on "USB Connected"

4. Step 0
Then click on "Turn on USB storage"

5. Step 0
Now system will show the following window . Click on "Open folder to view files"

6. Step 0
Now copy and save your data from TabTop drive to any other external storage device or your computer hard disk.

7. Step 1
Go to

8. Step 2.1
Then click on upgrade

9. Step 2.2
Download the image file on your computer

10. Step 2.3
Download the update tool on your computer

11. Step 2.4
Click on TabTop-7.4 Update Tool and Instruction Guide

12. Step 2.5
Save file on your desktop

13. Step 2.6
Wait for the download to start

14. Step 2.7
Wait till download is completed

15. Step 3.1
Open the folder where the file is saved

16. Step 3.2
Extract the files of the update tool on your desktop

17. Step 3.3
Then go inside the extracted files and double click on the LiveSuitPack_version1.06_
Select Yes to let the program make the changes to your computer
Double Click LiveSuitPack_version_1.07_
Double Click on LiveSuit.exe file.

18. Step 4.1
A window will open up welcoming you to Live Suit.
Select Yes

19. Step 4.2
Then select "format"

20. Step 4.3
Select Next.

21. Step 4.4
Select Yes for new image file from your desktop an open it

22. Step 4.5
Open “Milagrow 4.0.4Software.final”

23. Step 4.6
Now click on Finish

24. Step 5.1 Installing Android 4.0.4 on the TabTop 7.4
Now power off your TabTop 7.4 completely.
Put USB cable in the TabTop, while keeping the back button of the TabTop pressed.
Then connect the other end of the USB wire to your computer.

25. Step 5.2
A window of live suit will open up on your desktop

26. Step 5.3
Select Yes on the desktop and then select "format upgrade" (This is the one which is not marked as recommended option. So be careful in the selection)
Then again press YES

27. Step 5.4
Wait till the process ends

28. Step 5.5
Now the window should show update success.

29. Step 6 Remove the USB cable and then power on the TabTop 7.4
The Tabtop will show the message –
"Make yourself at home."
Select okay.
Leave the TabTop 7.4 alone for 15 minutes. Slowly all the applications will configure in the new firmware
Now your TabTop 7.4 is ready to use with the Android 4.0.4

30. Thank You