1. Systems Engineering – Risk Analysis with FMEA
Special Topics
Fishbone Chart
FMEA

2. Risk/Failure Models At the ‘project’ level.
At the system or device level.
Common methods include Fishbone analysis or FMEA
FMEA – Failure Modes and Effects Analysis

3. Fishbone Chart ‘Cause and Effect’ Analysis
Create an Ishikawa or Fishbone Chart
Head is ‘Problem’ – Skeleton are the ‘Causes’
Typical categories, 5M’s + E
Man
Machine
Material
Method
Measurement
Environment

4. Industrial Monitoring Sensor
Create a Fishbone Chart for ‘Sensor Not Working’

5. Analysis Tool – FMEA Failure Mode and Effects Analysis
FMEA is an ‘enhanced’ Cause and Effect Analysis. (the 5M’s plus E)
Do Fishbone Chart for Industrial Sensor.
Apply FMEA to a Design or Processes at many levels.
Systems often have many SPFs – single points of failure.

6. Design Tool – FMEA People Make Mistakes Products and Processes Fail
The Concept of FMEA:
People Make Mistakes
Products and Processes Fail
Anticipate these errors and eliminate them with design or process changes !!

7. FMEA Example How many ways can a floppy disk be inserted ??
What design features make this possible??

8. FMEA Steps -The traditional approach
Team activity
Select component, system, process step, etc.
Identify possible failure modes.
Identify causes of failure modes.
Identify effects of failures.
Estimate (1-10 ranking):
Occurrence – how often (1=not, 10=often)
Severity – how bad (1=not, 10=severe)
Detection – how easy (1=easy, 10=difficult)
Calculate RPN – ‘risk priority number’

9. FMEA RPN example Rules for OSD Values Threshold for Action – Varies
Thresholds (?)

10. From National Instruments

11. From National Instruments

12. Detection in Design or Manufacturing

13. Many versions of this chart…

14. Occurrence and Severity
O and S are often the two critical factors and some analysis just looks at these two.
From Dieter

15. Industrial Monitoring Sensor

17. FMEA Summary
Combines ideas of ‘Cause and Effect’ chart, mistake proofing, and risk.
Useful to identify and prioritize possible failure modes and fixes.
Possible Fixes :
High reliability components,
De-rate components,
Redundancy,
Change the design.

18. FMEA - A Requirements Approach
FMEA often starts with:
Identify possible failure modes.
How? – guess, experience, brainstorm, etc.
Consider –
Requirements are what the system is supposed to do.
Counter-requirements (not being met) are failure modes.
Use counter-requirements to populate the FMEA table.

19. Design FMEA Example

20. Design FMEA Coyote Hoist

21. Class Discussion – Process FMEA
You are responsible for developing a process to stuff several hundred envelopes for a charity group.
Each envelope is to contain three separate flyers and a cover sheet with the recipients name on it. After folding, the name must show in the cutout in the envelope. The final step is to seal and place stamps on the envelope for mailing.
Develop a PFMEA* for this process.
*Process FMEA