Download presentation
Presentation is loading. Please wait.
Published byEsmond Little Modified over 9 years ago
1
Inductors
2
Inductance Electrons in motion create electromagnetic fields – Recall from previous section that electrons in motion also create an electrostatic field The electromagnetic field can be intensified by making a loop in the wire A device which creates an electromagnetic field is called an inductor
3
Inductors Schematic symbol for inductor or coil
4
Inductance The unit of measure of inductance is henry The inductor is an electromagnet One use of the inductor is in relays to operate a switch Another use is in the construction of electric motors
5
Relays Contacts
6
Relays M 12 volts 760 volts
7
Relays M
8
M
9
Inductors
11
Three factors affecting inductance – Nature of the coil Size Diameter of conductor Number of turns Length – Current flow – Presence of materials within the magnetic field
12
Variable Inductor
13
Inductors When current is turned off from electromagnet, the electromagnetic field collapses back to the coil There is a charge or current present on the inductor Electromagnetic energy is stored in inductors Inductors are used to convert AC to DC
14
Inductors 0 volts 10 volts Time “on” “off” “on” “off” Capacitor Inductor
15
Inductors Energy is expended in forming electromagnetic field Inductors resist current flow – electrons resist flow Impedance is reluctance in a coil Three factors affecting inductance also affect impedance
16
Transformers Transformers are constructed from two inductors or coils in close proximity to one another Just like capacitors, current can be induced to flow in the secondary coil if enough current flows through the primary Transformers are used to increase or decrease current flow and/or voltage
17
Transformers Primary Secondary
18
Transformers Step up transformers have more turns in the secondary coil and increase output Step down transformers have fewer turns in the secondary and decrease output Isolating transformers have same number of turns in both coils and neither decrease nor increase output – but isolate two segments of a circuit
19
Transformers
Similar presentations
© 2024 SlidePlayer.com. Inc.
All rights reserved.